Online test engine for simulation 70-663 test

When you visit this page, you will find there are three different versions for you to choose. Have you ever prepared for the MCTS 70-663 certification exam using PDF file? If yes, then I want to focus on the introduction of online test engine which will be more interesting and efficiency. 70-663 online test engine is just an exam simulator with some intelligence and humanization which can inspire your desire for 70-663 exam test study and drive away your bad mood towards 70-663 Pro: Designing and Deploying Messaging Solutions with Microsoft Exchange Server 2010 exam questions & answers. As we all know, the 70-663 exam questions & answers on the papers are dull and boring, to the people with great determination and perseverance, that is not a difficult thing to overcome, but to the person with little patience and negative mood, 70-663 exam dumps will be a question. 70-663 online test engine create an interactive environment, allowing the candidates to have a nearly actual 70-663 exam test. What surprised us is that 70-663 online test engine is suitable for all the electronic devices without any installation restriction.

Nowadays, too often there is just not enough time to properly prepare for 70-663 Pro: Designing and Deploying Messaging Solutions with Microsoft Exchange Server 2010 exam certification while at home or at work. But time spent commuting between the two, or otherwise away from your desk, need no longer be wasted. Microsoft 70-663 online test engine is the answer for on-the-go productivity. You can install the 70-663 online test engine on your phone and do the simulation 70-663 test when you at subway or waiting for a bus. In a word, 70-663 online test engine will help you to make time for self-sufficient 70-663 exam preparation, despite your busy schedule.

Microsoft 70-663 exam certification, as the IT technology focus is a critical component of enterprise systems. So if you want make a strong position in today's competitive IT industry, the MCTS 70-663 exam certification is essential. More and more IT practitioners are increasingly aware of the need for professional development to enrich themselves. As we all know, there are some difficulty and obstacles for getting the 70-663 exam certification. 70-663 exam training materials will meet your needs and drag you out of the troubles. The opening hints and tips of 70-663 exam training materials will help you when you get stuck. The high-relevant, best-quality of 70-663 exam questions & answers can extend your knowledge. So you can do your decision whether to choose 70-663 exam dumps or not. Here are some descriptions of 70-663 Pro: Designing and Deploying Messaging Solutions with Microsoft Exchange Server 2010 exam training materials, please take a look.

70-663 exam collection guarantee your exam success

When you spend your money on the 70-663 exam training material, you must hope you will pass and get the 70-663 Pro: Designing and Deploying Messaging Solutions with Microsoft Exchange Server 2010 exam certification at one shot. You are wise when you choose MCTS 70-663 exam collection. There are a strong and powerful IT professional team seeking to the research& development of 70-663 exam collections. Gathering the real question with answers, 70-663 exam training materials will give you the actual test simulation. Besides, the latest exam are compiled and verified by the effort of day and night from the experts of Microsoft. The high-relevant and best quality of MCTS 70-663 exam collection will make a big difference on your 70-663 exam test. If you are still worried about the money spent on 70-663 exam training material, we promise that no help, full refund.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Microsoft Pro: Designing and Deploying Messaging Solutions with Microsoft Exchange Server 2010 Sample Questions:

1. You are a network administrator for a company named Contoso, Ltd. The company has offices in New York, Boston and Montreal. Each office contains an Active Directory site as show in the exhibit. (Click the Exhibit button.)
All access to the Internet is routed through the Montreal office. Only TCP ports 80, 25, and 443 are allowed from the Internet to the internal network. You plan to deploy an Exchange Server 2010 Service Pack 1 (SP1) organization. Each site will contain a
Mailbox server and a Hub Transport server.
You need to recommend where to place the Client Access servers for the organization.
The solution must minimize software costs.
Where should you recommend placing the Client Access servers?
Exhibit:

A) in the Montreal site, the New York site, and the Boston site
B) in the Montreal site and the New York site
C) in the Boston site and the New York site
D) in the Montreal site only

2. Your network contains an internal network and a perimeter network. The internal network contains a single
Active Directory site. The perimeter network contains two Exchange Server 2010 Edge Transport servers.
You plan to deploy an Exchange Server 2010 organization on the internal
network.
You need to plan the deployment of Hub Transport server roles to meet the following requirements:
-If a single Hub Transport server fails, e-mail messages from the Internet must be delivered to the Mailbox servers.
-If a single Hub Transport server fails, users must be able to send e-mail messages to other users that have mailboxes on the same Mailbox server.
What should you include in the plan?

A) Deploy one Hub Transport server on the internal network and one Hub Transport server on the perimeter network.
B) Deploy one Edge Transport server on the internal network, and then configure EdgeSync synchronization.
C) Deploy one Hub Transport server on the internal network, and then configure EdgeSync synchronization.
D) Deploy two Hub Transport servers on the internal network.

3. You need to recommend changes to the Active Directory infrastructure of Litware. The changes must ensure that users in all of the offices can access their local mailbox if a WAN link fails.
What should you recommend?
Case Study Title (Case Study): Litware, Inc
Company Overview
Litware, Inc. is a manufacturing company.
Physical Locations
The company has offices in Bangkok and Tokyo. Each office has a sales department. All network support staff is located in the Bangkok office.
Existing Environment
Litware has a forest that contains a single domain named litwareinc.com. An Active Directory site exists for each office. The sites connect to each other by using a high-speed WAN link. The WAN link has an average net available bandwidth of 15 percent during business hours. The domain contains three domain controllers. The domain controllers are configured as shown in the following table.

The network has an Exchange Server 2010 Service Pack 1 (SP1) organization that contains four servers. The servers are configured as shown in the following table.

All of the servers have the following hardware configurations:
-32 GB of RAM
-Two dual quad-core Intel Xeon processors
-Two 1-gigabit per second network adapters
-One RAID 10 disk array that has 12 300-GB, 1S,000-RPM SAS disks for data
-One RAID 1 disk array that has two 73-GB, 10,000-RPM SAS disks for program files
-One RAID 1 disk array that has two 73-GB, 10,000-RPM SAS disks for the operating system
Requirements
Business Goals
Litware has the following general requirements that must be considered for all technology deployments:
-Minimize costs whenever possible.
-Minimize administrative effort whenever possible.
-Minimize traffic on the WAN link between the Bangkok and Tokyo offices.
Planned Changes
Litware acquires a management company named A, Datum Corporation. A, Datum has 2,500 employees.
A, Datum has the following email infrastructure:
-A sales department, in which 150 employees work
-A third-party email infrastructure that is used for IMAP4 and SMTP
-Three other departments that use the SMTP domains ofadatum.com, asia.adatum.com, and
contoso.com. Users are assigned only one email address that uses the SMTP domain of their
department
You plan to deploy a new Exchange Server 2010 SP1 organization for A, Datum. The new email infrastructure must meet the following implementation requirements:
-All employees must have access to their mailbox if a single server fails.
-Sales department employees must use Windows Internet Explorer 8 to access their mailbox,
-Sales department employees must be prevented from accessing the calendar or journal features of Outlook Web App.
-All employees who do not work in the sales department must have access to all of the Outlook Web App features.
-All email messages sent to recipients outside of A, Datum must have a return address in the
[email protected] format.
-The administration of the A, Datum Exchange organization must be performed by a dedicated team of administrators.
-The Exchange administration team for A, Datum must be distinct from the Exchange administration team of Litware.
The new email infrastructure for A, Datum must meet the following security requirements:
-Litware administrators must be prevented from viewing or modifying the settings of the mailboxes of A, Datum users.
-All inbound and outbound Internet email to and from the A, Datum domains must be routed through the Hub Transport servers of Litware.
-All email messages that contain financial information must be encrypted automatically while in transit and the recipients of the messages must be prevented from forwarding them to users outside of the company' s financial department.
Compliance Requirements
Litware must meet the following compliance requirements:
-Each email message sent by an attorney from the Litware legal department must be approved by the manager of the legal department.
-Attorneys must be able to classify email messages as "attorney-client privileged".
-All email messages classified as "attorney-client privileged" must contain a legal disclaimer
automatically.
User Requirements
All users who have a portable computer use Microsoft Outlook 2010 when they work online and offline.
When the users work offline, they must be able to read existing email messages and create new email
messages.
Users who have a large mailbox must minimize the amount of hard disk space used by the mailbox on their
portable computer.

A) Enable universal group membership caching in the Tokyo site.
B) Deploy a read-only global catalog server to the Bangkok site.
C) Disable the global catalog on Server2.
D) Enable universal group membership caching in the Bangkok
E) Enable the global catalog on Server3.
F) Deploy a read-only global catalog server to the Tokyo site.

4. Your company has a main office and two branch offices. Your network consists of a single domain Active Directory forest. An Active Directory exists for each office.
The main office contains five domain controllers that run windows Server 2004 (x64). Each branch office contains one read only domain control (RODC) that runs Windows Server 2008. All domain controllers are configured as global catalog servers.
You plan to deploy one Exchange Server 2010 server in each site.
You need to recommend changes to Active Directory to support the planned deployment. The solution must ensures that Exchange servers branch office site connect to their local domain controllers.
What should you recommend?

A) Change all RODCs to Windows Server 2008 (x64) RODCs.
B) Disable site link bridging for the forest and configure Exchange specific costs.
C) Implement a writable domain controller in each branch office.
D) Implement a DNS zone for each office.

5. A corporate environment includes an on-premise deployment of Exchange Server 2010 SP1. The environment is configured as shown in the following table.

The company plans to move the European employee email accounts to a cloud-based Exchange Server 2010 SP1 service provider.
You have the following requirements:
-Route incoming messages to the appropriate Exchange Server environment.
-Ensure that all employees retain their current email addresses.
-Ensure that MX records do not change.
You need to recommend a solution for meeting the requirements.
What should you recommend?

A) Configure address rewriting. Configure send connectors for the on-premise Edge Transport server and the cloud-based servers.
B) Configure address rewriting. Configure send connectors for the on-premise Hub Transport server and the cloud-based servers.
C) Configure an external relay domain for wingtiptoys.com. Configure send connectors for the on premise and cloud-based servers.
D) Configure an external relay domain for tailspintoys.com. Configure send connectors for the on premise and cloud-based servers.

Solutions: