1Y0-403 Pre-Exam Practice Tests | (Updated 100 Questions)
Valid 1Y0-403 Exam Q&A PDF - One Year Free Update
NEW QUESTION 39
Scenario: Eight hundred users from a newly acquired company based in another continent will immediately require access to several Citrix applications being added to a zone within the Citrix Virtual Apps Site. Approximately 40 Citrix servers are being deployed in that zone.
Management informs a Citrix Architect that the new company has an unused Citrix ADC MPX 24xxx series applies that should be used to address Citrix Gateway requirements. The design must support updating the Citrix ADC firmware without user interruption.
What should the architect do to ensure that the Citrix ADC MPX 24000-series appliance addresses these requirements?
- A. Deploy Citrix Gateway into 2 admin partitions.
- B. Install a Premium license on the appliance and deploy Citrix Gateway instances in a cluster.
https://docs.citrix.com/en-us/citrix-hardware-platforms/sdx/convert-mpx-to-sdx/convert-mpx24100-sdx24100.html - C. Convert to Citrix SDX, install an add-on pack license on the appliance, and deploy Citrix Gateway VPX instances in a cluster.
- D. Install a Premium license on the appliance and deploy 2 extended access control lists (ACLs)
Answer: C
NEW QUESTION 40
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. Currently, the environment is configured with 2 locations with identical Citrix Virtual Desktops Sites. Each Site has 2 Delivery Controllers, 2 StoreFront servers, and 1 Citrix ADC high-availability pair. The same applications have been published from both Sites for all users. Two zones (Zone A and Zone B) are configured in each Site with 1 Delivery Controller in each zone. The Microsoft Exchange server is only accessible from Virtual Delivery Agent (VDA) machines in Zone A in each Site.
Six access requirements have been identified:
* Users should have a single URL when accessing resources from different Sites.
* Users should always connect to the data center closest to their location.
* Applications added to Favorites within the Citrix Workspace app should be retained when accessed from different Sites.
* Launched applications and desktops should always connect through a local Citrix ADC.
* No duplication of applications published from different Sites.
* Microsoft Outlook should always launch in Zone A.
What should the architect recommend to ensure that Microsoft Outlook always launches from Zone A for every user?
- A. Move a Delivery Controller from Zone B to Zone A.
- B. Designate Zone A as the Home Zone for all users.
- C. Configure zone preference based on user location.
- D. Configure Zone A as the application Home Zone for Microsoft Outlook.
Answer: D
NEW QUESTION 41
Scenario: A Citrix Architect is configuring a multi-location profile strategy as part of a large Citrix Virtual Apps and Desktops solution. The architect needs to implement a single policy that sets the profile path for all users and distributes the user profiles between 3 shares and 9 file servers.
* New York users: Server: NYC-FS.company.lan - Share: NYC-Profiles$
* Miami users: Server: MIA-FS.company.lan - Share: MIA-Profiles$
* San Francisco users: Server: SFO-FS.company.lan - Share: SFO-Profiles$ Which value constitutes a valid path for use with a Citrix Profile Management policy?
- A. Error! Hyperlink reference not valid.
- B. Error! Hyperlink reference not valid.
- C. Error! Hyperlink reference not valid.
- D. Error! Hyperlink reference not valid.
Answer: A
NEW QUESTION 42
A Citrix Architect needs to conduct a capabilities assessment for an organization that wants to design and build a new XenApp and XenDesktop environment.
Which four capabilities will directly influence whether the existing Citrix administrative team will have the capacity to support the new environment? (Choose four.)
- A. Training and certifications of support staff and users
- B. Image management processes
- C. Network architecture
- D. Current backup solutions
- E. Current storage solutions
- F. Existing XenApp and XenDesktop environments
- G. Users and applications
Answer: A,C,E,G
Explanation:
https://www.citrix.com/blogs/2011/06/30/desktop-transformation-capabilities-assessment/ Users and Applications.Establish the pain points experienced by the user community by distributing a questionnaire to a representative sub-section of users. The characteristics of the user estate need to be established so that that the High-Level Design can be scaled appropriately. Therefore it's necessary to capture the following metrics:
Total number of users (available from the user segmentation phase)
Number of third-party users
Number of concurrent internal users
Number of concurrent remote users
In addition, identify the application delivery mechanism(s) currently in use and establish whether the applications have already been packaged.
Network Architecture. So that the High-Level Design can determine if there's sufficient network capacity, map the location of the users against the existing network topology. Review existing monitoring solutions for periods of latency, lost packets and insufficient bandwidth. Check that there are a sufficient number of IP addresses available to support the proposed virtual desktop solution. Also, examine the topology for single points of failure and potential bottlenecks as well as determining whether Quality of Service (QoS) and network optimization devices are available.
Training and Certifications. Desktop transformation projects should involve training for both support staff and end users. During the capabilities assessment, capture the current certification level of the support staff as well as their experience across the environment including Citrix, Microsoft, Storage, Networking, Virtualization, etc.
Virtualization and Storage. Perform a thorough review of the virtualization and storage solutions currently in use. Establish their resilience, scalability, performance and redundancy so that the most appropriate solution can be selected for the High-Level Design.
NEW QUESTION 43
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment.
The table in the exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.
Click the Exhibit button to view the table.
The architect should scale the hardware used to host the virtual machines (VMs) for User Group 1 to cores. (Choose the correct option to complete the sentence.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: D
NEW QUESTION 44
Scenario: A Citrix Architect designing a new Citrix Virtual Apps and Desktops environment needs to determine which endpoints to include. Based on discussions with various departments, the user requirements listed in the exhibit were collected.
Click the Exhibit button to view the requirements.
In addition to the user requirements, the architect must address the organizational requirement of minimizing endpoint management effort.
Which endpoint type should the architect use for the Sales Group, based on the requirements?
- A. Corporate-owned laptop/notebook
- B. Bring-your-own device (BYOD) smartphone
- C. Corporate-owned thin client
- D. Corporate-owned smartphone
- E. Bring-your-own device (BYOD) laptop/notebook
Answer: E
NEW QUESTION 45
Scenario: A Citrix Architect is designing a Citrix Virtual Desktops environment. The Engineer Group requires NVIDIA hardware with shared virtualized GPUs due to its use of graphical applications. Management wants to use 4 components within the Citrix Virtual Desktops environment to meet these requirements:
NVIDIA GRID Tesla P40 GPUs
Microsoft Hyper-V Server 2012 R2
Windows 10 virtual machines (VMs)
Citrix Virtual Desktops 7
Which component must the architect change to implement this use case?
- A. NVIDIA GRID Tesla P40 GPUs
- B. Citrix Virtual Desktops 7
- C. Windows 10 virtual machines
- D. Microsoft Hyper-V Server 2012 R2
https://docs.nvidia.com/grid/5.0/grid-vgpu-release-notes-microsoft-windows-server/index.html
Answer: D
NEW QUESTION 46
A Citrix Architect needs to enable the security of the Virtual Delivery Agent (VDA) by evaluating the 'Enable- VdaSSL.ps1 -Enable' script.
Which supported SSL protocol version is least secure when using the default settings of the script?
- A. TLS 1.0
- B. SSL 1.0
- C. SSL 2.0
Defaults setting is TLS 1.0 (Script -> .PARAMETER SSLMinVersion Specifies the minimum SSL version (allowed values are SSL_3.0, TLS_1.0, TLS_1.1 and TLS_1.2). Default is TLS_1.0. )
https://support.citrix.com/article/CTX220062 - D. TLS 1.2
- E. TLS 1.1
- F. SSL 3.0
Answer: A
NEW QUESTION 47
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. The architect has identified the requirements, based on the assessment and early stages of the design.
Click the Exhibit button to view the requirements.
Additionally, the IT team identified 2 provisioning strategy requirements:
- Should be compatible with planned design decisions
- Should minimize required time to perform image and application updates Which provisioning method should the architect use for the environment, based on the design decisions and requirements shown in the exhibit?
- A. Manual Provisioning with App Layering
- B. Citrix Provisioning
- C. Machine Creation Services (MCS) with App Layering
- D. Manual Provisioning
- E. Citrix Provisioning with App Layering
- F. Machine Creation Services (MCS)
Answer: A
NEW QUESTION 48
Scenario: A Citrix Architect is designing a Citrix Virtual Apps and Desktops environment. The company has a small IT team with limited experience deploying and maintaining this type of environment.
To perform adequately, the line of business application used by the company must be hosted <10ms RTT from a backend database located within a customer-managed data center.
Which Citrix Virtual Apps and Desktops environment best meets the needs of this organization?
- A. Citrix Virtual Apps and Desktops and Microsoft Azure workload
- B. Citrix Virtual Apps and Desktops and on-premises workload
- C. Citrix Virtual Apps and Desktops Service and on-premises workload
- D. Citrix Virtual Apps and Desktops Service and Microsoft Azure workload
Answer: D
NEW QUESTION 49
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment.
The table in the exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.
Click the Exhibit button to view the table.
The architect should scale the hardware used to host the virtual machines (VMs) for User Group 1 to cores. (Choose the correct option to complete the sentence.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: D
NEW QUESTION 50
Scenario: A Citrix Architect needs to assess a Citrix Virtual Apps and Desktops environment. The Citrix Virtual Apps and Desktops diagram in the exhibit gives details about the current Site and zone design.
Click the Exhibit button to view the diagram.
Which statement is correct if the Delivery Controller in Satellite Zone 2 fails?
- A. Virtual Delivery Agent (VDA) machines in Zone 2 will register within Satellite Zone 1
- B. Virtual Delivery Agent (VDA) machines in Zone 2 will register within the Primary Zone
- C. Virtual Delivery Agent (VDA) machines will register using the Local Host Cache (LHC)
- D. Virtual Delivery Agent (VDA) machines in Satellite Zone 2 will NOT register
Answer: B
NEW QUESTION 51
Scenario: A Citrix Architect is implementing a new Citrix Virtual Apps and Desktops environment. The IT team has purchased 1,000 Citrix Virtual Apps and Desktops Advanced licenses.
Moving forward, the company requires the IT team to produce a report of all unsuccessful connections of Citrix Virtual Apps during the previous 12 months.
Which two actions does the architect need to take to support these requirements? (Choose two.)
- A. Upgrade to Citrix Gateway Universal licenses.
- B. Configure `GroomSessionsRetentionDays' to 365 days.
- C. Upgrade to Citrix Virtual Desktops Premium licenses.
- D. Implement Citrix Application Delivery Management.
- E. Configure `GroomFailuresRetentionDays' to 365 days.
Answer: B,D
NEW QUESTION 52
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The following Control Layer security requirements have been identified:
For security reasons, it is unacceptable to use default ports for FMA Services.
Access to PowerShell and Citrix Studio for management will be restricted to management workstations by granular firewall rules.
Which command-line interface executable should the architect run to ensure that all Control Layer security requirements are met?
- A. BrokerService.exe VdaPort 8081 WISSLPort 8083 SDKPort 8083 ConfigureFirewall
- B. BrokerService.exe VdaPort 80 WISSLPort 80 SDKPort 8083 ConfigureFirewall
- C. BrokerService.exe VdaPort 8081 WISSLPort 8082 SDKPort 8083 ConfigureFirewall
- D. BrokerService.exe VdaPort 443 WISSLPort 443 SDKPort 443 ConfigureFirewall
Answer: C
Explanation:
These are the default ports, so to change to something not default the only option for the 3 services will be D.
http://www.centix.be/p_217.htm
https://blog.citrix24.com/xendesktop-how-to-change-used-ports/
NEW QUESTION 53
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. Currently, the environment is configured with 2 locations with identical Citrix Virtual Desktops Sites. Each Site has 2 Delivery Controllers, 2 StoreFront servers, and 1 Citrix ADC high-availability pair. The same applications have been published from both Sites for all users. Two zones (Zone A and Zone B) are configured in each Site with 1 Delivery Controller in each zone. The Microsoft Exchange server is only accessible from Virtual Delivery Agent (VDA) machines in Zone A in each Site.
Six access requirements have been identified:
Users should have a single URL when accessing resources from different Sites.
Users should always connect to the data center closest to their location.
Applications added to Favorites within the Citrix Workspace app should be retained when accessed from different Sites.
Launched applications and desktops should always connect through a local Citrix ADC.
No duplication of applications published from different Sites.
Microsoft Outlook should always launch in Zone A.
What should the architect recommend to ensure that Microsoft Outlook always launches from Zone A for every user?
- A. Move a Delivery Controller from Zone B to Zone A.
- B. Designate Zone A as the Home Zone for all users.
"If that application has a configured zone association (an application home), then the preferred zone is the home zone for that application." https://docs.citrix.com/en-us/citrix-virtual-apps-desktops/1912-ltsr/manage-deployment/zones.html#tailoring-zone-preference - C. Configure zone preference based on user location.
- D. Configure Zone A as the application Home Zone for Microsoft Outlook.
Answer: D
NEW QUESTION 54
......
Citrix Virtual Apps and Desktops 7 Assessment, Design and Advanced Configurations Free Update Certification Sample Questions: https://www.exams4collection.com/1Y0-403-latest-braindumps.html
Trend for Citrix 1Y0-403 pdf dumps before actual exam: https://drive.google.com/open?id=165SzMlUKyz8r63iYrzKwyJ8Ara8855tu
