[2021] Use Valid Exam H35-210_V2.5 by Exams4Collection Books For Free Website
Free Huawei Certified ICT Associate H35-210_V2.5 Official Cert Guide PDF Download
NEW QUESTION 70
What is the maximum splitting ratio supported by the MA5680T GPBC board?
- A. 1:16
- B. 1:32
- C. 1:64
- D. 1:128
Answer: C
NEW QUESTION 71
When performing FTTx networking and data planning, user security needs to be considered. Which of the following measures can prevent attacks between users?
- A. Use port physical information to identify users
- B. Use anti-mac to solve
- C. Layer 2 isolation and controlled mutual access of users
- D. Defense IP spoofing
Answer: C
NEW QUESTION 72
What does the long ONT PON indicator light mean?
- A. ONT receiving optical power is lower than optical receiving sensitivity
- B. ONT tries to establish a connection with the OLT
- C. ONT light is abnormal
- D. ONT and OLT have established a connection
Answer: D
NEW QUESTION 73
VLAN conversion on the user side is generally performed on the MA5680T service board. What are the methods for VLAN conversion?
- A. translate-and-transparent
- B. transparent
- C. add-double
- D. translate
Answer: B,C,D
NEW QUESTION 74
Is the following description correct? The ADSL G.992.1 or G.dmt standard is a technical specification that does not require a signal splitter.
- A. False
- B. True
Answer: A
NEW QUESTION 75
Regarding the UA5000 IPMB single board, which one of the following descriptions is wrong?
- A. IPMB is an IP service processing board, used to converge and process broadband services
- B. Forward PVMB's VoIP service, and realize IP uplink through FE/GE electrical port or GE optical port.
- C. Support main/standby switchover
- D. 8 GE optical ports can be provided as uplink ports
Answer: D
NEW QUESTION 76
Regarding the ADSL rate limit in the UA5000, which of the following statements is incorrect?
- A. ADSL rate limit can use port rate limit or PVC rate limit.
- B. Set the PVC UPC switch to ON when using PVC speed limit.
- C. Port speed limit is to limit the flow through the maximum uplink and downlink speed set when the line template is configured.
- D. Set the PVC UPC switch to ON when using port speed limit.
Answer: D
NEW QUESTION 77
Is the following description correct? MACAddress by48bitComposition, usually with12Bit16Hexadecimal representation, before6Bit16Base numbers are represented byIEEEResponsible for unified distribution, used to determine the uniqueness of the manufacturer, and later6Bit16The hexadecimal numbers are managed by each manufacturer.
- A. False
- B. True
Answer: B
NEW QUESTION 78
What are the incorrect statements about Type B protection for GPON networks?
- A. Service configuration data only needs to be configured to the main port, no need to configure two copies
- B. Support OLT inter-board and intra-board port combination protection pair
- C. Protection based on PON port and backbone fiber
- D. Switching trigger conditions: 1) branch fiber failure, 2) OLT single board failure, 3) component failure
Answer: D
NEW QUESTION 79
What is the allocation method of terminal identifiers stipulated in the H248 protocol?
- A. MG allocation when calling, MGC allocation when called
- B. MG allocation when the terminal is the calling party, and MGC allocation when it is the called party
- C. Assigned by MGC
- D. Assigned by MG
Answer: D
NEW QUESTION 80
The value of the PROTOCOL field of the PPP protocol is 8021, what is the protocol represented?
- A. IPX
- B. IPCP
- C. LCP
- D. IP
Answer: B
NEW QUESTION 81
In order to ensure the traceability of users and the refined QoS control management based on users and services, Internet services are planned using PUPSPV (per user, service, and VLAN), and the attributes of SVLAN on the OLT are recommended to be configured. For what kind?
- A. QinQ
- B. common
- C. smart
- D. stacking
Answer: D
NEW QUESTION 82
Which of the following are the methods and ideas for locating abnormal XDSL dial-up faults?
- A. Check the ATM package format of MODEM
- B. Confirm whether the gateway can be pinged from the client
- C. Query the traffic of the xDSL port to determine whether there is normal business traffic with the terminal
- D. Confirm whether the MODEM configuration is correct
Answer: A,B,C,D
Explanation:
Product Questions:
NEW QUESTION 83
When the MA5600 SCU main control board starts to load, what is the status of the RUN light?
- A. 1 second on and 1 second off, periodic flashing
- B. 2 seconds on and 2 seconds off, periodic flashing
- C. 0.25 second on, 0.25 second off, periodic flashing
- D. 0.5 seconds on and 0.5 seconds off, flashing periodically
Answer: C
NEW QUESTION 84
The MA5600 main control board (SCU) restarts repeatedly. What are the reasons why it is impossible?
- A. Main control board host software problem
- B. User ring network problem
- C. Incorrect data configuration
- D. The main control board component is damaged
Answer: C
NEW QUESTION 85
By default, which of the following types is the queue scheduling mode on the OLT?
- A. CQ
- B. WRR
- C. PQ
- D. WFQ
Answer: C
NEW QUESTION 86
Is the following description correct? The process of voice fault location can generally be divided into: troubleshooting the external device fault, locating the fault to the specific device, and locating the fault to the board.
- A. False
- B. True
Answer: B
NEW QUESTION 87
......
Huawei H35-210_V2.5 Official Cert Guide PDF: https://www.exams4collection.com/H35-210_V2.5-latest-braindumps.html
Exam H35-210_V2.5: HCIA-Access V2.5 - Exams4Collection: https://drive.google.com/open?id=1z_jt_AQQ0S2dpgB8sWLIdGrn4TVbgBQh
