2024 Realistic Verified Free CyberArk CPC-SEN Exam Questions
CPC-SEN Real Exam Questions and Answers FREE
NEW QUESTION # 18
Arrange the steps to failover to the passive CPM in the correct sequence.
Answer:
Explanation:
1 - Validate that the active CPM's services are stopped and set to manual.
2 - On the passive CPM, confirm details in the Vault.ini configuration file, reset the password to the CPM user, and recreate the credential file.
3 - Enable the CPM services on the passive CPM.
4 - Review logs to confirm the passive CPM services are running as expected.
NEW QUESTION # 19
You are planning to configure Multi-Factor Authentication (MFA) for your CyberArk Privilege Cloud Shared Service. What are the available authentication methods?
- A. LDAR RADIUS. SAML OpenID Connect (OIDC)
- B. Only RADIUS can be used to achieve MFA across all components, such as PSM for RDP and PSM for SSH.
- C. Windows. PKI. RADIUS. CyberArk, LDAP. SAML. OpenID Connect (OIDC)
- D. Privilege Cloud Shared Services fully utilize CyberArk Identity and its MFA options.
Answer: C
Explanation:
In CyberArk Privilege Cloud, Multi-Factor Authentication (MFA) can be configured to enhance security by requiring multiple methods of authentication from independent categories of credentials to verify the user's identity. The available authentication methods include:
Windows Authentication: Leverages the user's Windows credentials.
PKI (Public Key Infrastructure): Utilizes certificates to authenticate.
RADIUS (Remote Authentication Dial-In User Service): A networking protocol that provides centralized Authentication, Authorization, and Accounting management.
CyberArk: Uses CyberArk's own authentication methods.
LDAP (Lightweight Directory Access Protocol): Protocol for accessing and maintaining distributed directory information services.
SAML (Security Assertion Markup Language): An open standard that allows identity providers to pass authorization credentials to service providers.
OpenID Connect (OIDC): An authentication layer on top of OAuth 2.0, an authorization framework.
Reference for this can be found in the CyberArk Privilege Cloud documentation, which details the integration and setup of MFA using these methods.
NEW QUESTION # 20
Which tool configures the user object that will be used during the installation of the PSM for SSH component?
- A. CreateCredFile
- B. CreateUserPass
- C. ConfigureCredFile
- D. ConfigureUserPass
Answer: A
Explanation:
The tool used to configure the user object for the installation of the PSM for SSH component is CreateCredFile. This tool is responsible for creating a credentials file that stores the necessary user details required during the installation process, ensuring secure and correct authentication.
Reference:
CyberArk Privilege Cloud Introduction
NEW QUESTION # 21
You are implementing LDAPS Integration for a standard Privilege Cloud environment.
Which information must be provided to the CyberArk Privilege Cloud support team through a Service Request? (Choose 2.)
- A. LDAP bind username and password used to authenticate to the directory to be integrated C Domain Base Context used to locate the users and groups in the Active Directory to be integrated
- B. remote port set during secure tunnel configuration for each domain controller to be integrated
- C. Fully Qualified Domain Name and IP Address of the domain controllers to be integrated
- D. LDAPS certificate chain for all domain controllers to be integrated
Answer: C,D
Explanation:
When implementing LDAPS Integration for a standard Privilege Cloud environment, certain information is crucial and must be provided to the CyberArk Privilege Cloud support team through a Service Request. The necessary details include:
LDAPS certificate chain for all domain controllers to be integrated (Option A): This information is critical to establishing a trusted secure connection between the Privilege Cloud and the domain controllers using LDAP over SSL (LDAPS).
Fully Qualified Domain Name and IP Address of the domain controllers to be integrated (Option D): This information is essential for accurately identifying and configuring the network connections to each domain controller that will be integrated with the Privilege Cloud.
NEW QUESTION # 22
A CyberArk Privileged Cloud Shared Services customer asks you how to find recent failed login events for all users. Where can you do this without generating reports?
- A. Identity User Portal
- B. Identity Administration Portal
C both Identity Administration and Identity User Portals - C. Privileged Cloud Portal
Answer: C
Explanation:
To find recent failed login events for all users in CyberArk Privileged Cloud Shared Services without generating reports, you can use the Privileged Cloud Portal. This portal provides administrators with direct access to security and audit logs, including failed login attempts. It offers a real-time view and monitoring capabilities that allow for immediate visibility into authentication activities and potential security issues. This feature is crucial for maintaining the security and integrity of privileged accounts, enabling administrators to quickly respond to and investigate authentication failures.
NEW QUESTION # 23
According to best practice, when considering the location of PSM Connector servers in Privilege Cloud environments, where should the PSM be placed?
- A. near the CPM servers
- B. near the Vault (closer to the external internet connection)
- C. near the target devices
- D. near the Users
Answer: C
Explanation:
According to best practice, when considering the location of PSM Connector servers in Privilege Cloud environments, the PSM should be placed near the target devices. This placement minimizes latency and maximizes performance by reducing the distance that data has to travel between the PSM servers and the devices they are managing. This is particularly important for maintaining high efficiency and response times during remote session management and operations, which are critical for the overall effectiveness of the Privilege Cloud environment.
NEW QUESTION # 24
What is a supported certificate format for retrieving the LDAPS certificate when not using the Cyberark provided LDAPS certificate tool?
- A. p12
- B. .p7b
- C. .der
- D. p7c
Answer: C
Explanation:
For retrieving the LDAPS certificate when not using the CyberArk provided LDAPS certificate tool, the supported certificate format is .der. The DER (Distinguished Encoding Rules) format is a binary form of a certificate rather than the ASCII PEM format. This format is widely supported across various systems for securing LDAP connections by providing a mechanism for LDAP servers to authenticate themselves to users. This information can be verified by checking LDAP configuration guides and CyberArk's secure implementation documentation which outline supported certificate formats for LDAP integrations.
NEW QUESTION # 25
Refer to the exhibit.
You set up your LDAP Directory in CyberArk Identity, but encountered an error during the connection test.
Which scenarios could represent a valid misconfiguration? (Choose 2.)
- A. All required CA Certificates have been installed on the CyberArk Identity Connector but the LDAP Bind credentials provided are incorrect.
- B. Verify Server Certificate' is activated but the provided hostname is not listed as a Subject Alternative Name (SAN) in the LDAP server's certificate.
- C. TCP Port 636 could be blocked by a network firewall, preventing communication between the CyberArk Identity Connector and the LDAP Server.
- D. TCP Port 636 could be blocked by a network firewall, preventing communication between the Secure Tunnel and the LDAP Server.
Answer: B,C
Explanation:
From the error message provided, two likely scenarios could represent valid misconfigurations:
TCP Port 636 could be blocked by a network firewall, preventing communication between the CyberArk Identity Connector and the LDAP Server (A). This is a common issue where firewall settings prevent the secure communication port (typically 636 for LDAPS) from transmitting data between the server and the connector, thus blocking the connection attempt.
'Verify Server Certificate' is activated but the provided hostname is not listed as a Subject Alternative Name (SAN) in the LDAP server's certificate (C). This scenario occurs when SSL/TLS security measures are stringent, requiring that the hostname used to connect to the LDAP server must match one listed in the server's SSL certificate. If the hostname does not match, the connection will fail due to SSL certificate validation errors.
NEW QUESTION # 26
Which option correctly describes the authentication differences between CyberArk Privilege Cloud and CyberArk PAM Self-Hosted?
- A. CyberArk Privilege Cloud requires on-premises components for all authentication and does not support other cloud-based authentication protocols; CyberArk PAM Self-Hosted offers a wide array of methods, including support for SAML. OIDC. and other modern protocols, without needing on-premises components.
- B. CyberArk Privilege Cloud only provides a username and password authentication without third-party IdP integration; CyberArk PAM Self-Hosted uses traditional on-premises methods such as Windows and LDAP. but lacks modern protocols such as SAML or OIDC.
- C. Both use the same authentication methods.
- D. CyberArk Privilege Cloud uses cloud-based methods, integrating with CyberArk Identity for MFA. and supports SAML and OIDC; CyberArk PAM Self-Hosted depends on on-premises methods such as RADIUS and LDAP, but can adopt SAML or OIDC with additional setups.
Answer: D
Explanation:
The correct description of the authentication differences between CyberArk Privilege Cloud and CyberArk PAM Self-Hosted is that CyberArk Privilege Cloud uses cloud-based methods, integrating with CyberArk Identity for Multi-Factor Authentication (MFA), and supports SAML and OIDC, while CyberArk PAM Self-Hosted relies on on-premises methods such as RADIUS and LDAP, but can adopt SAML or OIDC with additional setups. CyberArk Privilege Cloud is designed to leverage modern cloud-based authentication protocols to enhance security and ease of use, particularly in distributed and diverse IT environments. In contrast, CyberArk PAM Self-Hosted offers flexibility to use traditional on-premises authentication methods but also supports modern protocols if configured to do so.
NEW QUESTION # 27
A support team has asked you to provide the previous password for an account that had its password recently changed by the CPM. In which tab within the account's overview page can you retrieve this information?
- A. Overview
- B. Details
- C. Versions
- D. Activities
Answer: C
Explanation:
To retrieve the previous password for an account that had its password changed by the CPM, you should look under the Versions tab within the account's overview page. This tab maintains a history of password changes, including previous passwords, along with other historical data points that allow for tracking changes over time. This feature is critical for auditing and rollback purposes in environments where knowing past credentials is necessary for troubleshooting or compliance.
NEW QUESTION # 28
In large-scale environments, it is important to enable the CPM to focus its search operations on specific Safes instead of scanning all Safes it sees in the Vault. How is this accomplished?
- A. AllowedSafes Parameter on each platform policy
- B. Administration > Options > CPM Scanner.
- C. MaxConcurrentConnection parameter on each platform policy
- D. Administration Options > CPM Settings
Answer: A
Explanation:
In large-scale environments, to enable the Central Policy Manager (CPM) to focus its search operations on specific Safes instead of scanning all Safes it sees in the Vault, the AllowedSafes parameter on each platform policy is used. This parameter can be configured within the platform settings in the CyberArk administration interface. By specifying safes in the AllowedSafes parameter, the CPM will only manage credentials within those designated safes, thereby optimizing performance and managing resources more efficiently by not scanning unnecessary safes. This setting is crucial for large environments where the CPM needs to be as efficient as possible due to the volume of managed accounts.
NEW QUESTION # 29
What are dependencies to update or change the CPM credential? (Choose 2.)
- A. CyberArk.TPC.exe
- B. APIKeyManager.exe
- C. Data Execution Prevention
- D. CPM/nDomain_Hardening.ps1
- E. CreateCredFile.exe
Answer: A,E
Explanation:
To update or change the Central Policy Manager (CPM) credentials, dependencies include:
CreateCredFile.exe (B): This utility is used to create or modify the encrypted file that stores the CPM's credentials. It is essential for securely handling the credential updates.
CyberArk.TPC.exe (D): This executable is part of the CyberArk suite that manages trusted platform module operations, which can include tasks related to credential security and management, particularly when hardware security modules are involved.
NEW QUESTION # 30
Which statement is correct regarding the LDAP integration with CyberArk Privilege Cloud Standard?
- A. LDAPS integration with Privilege Cloud requires StartTLS for secure and encrypted communication.
- B. You must track the expiration date of the directory server certificate and contact CyberArk Support to renew it.
- C. For certificate trust to your directory server, only the Issuing CA certificate is required.
- D. The top-level domain entry of the directory must be unique in the chosen Privilege Cloud region.
Answer: C
Explanation:
For LDAP integration with CyberArk Privilege Cloud Standard, the correct statement is that only the Issuing CA certificate is required for certificate trust to your directory server. This setup simplifies the process of establishing a trusted connection between CyberArk and the LDAP server by necessitating only the certification of the issuing Certificate Authority (CA), rather than needing multiple certificates from different levels of the trust chain. This approach ensures that the SSL/TLS communication between CyberArk and the LDAP server is secured based on the trust of the issuing CA's certificate.
NEW QUESTION # 31
What is the correct CyberArk user to use when installing the Privilege Cloud Connector software?
- A. Installer
- B. installeruser@<suffix>
- C. Administrator
- D. <subdomain>_admin
Answer: D
Explanation:
The correct CyberArk user to use when installing the Privilege Cloud Connector software is typically formatted as <subdomain>_admin. This username format indicates a privileged administrative account associated with the specific subdomain of the CyberArk Privilege Cloud installation. It ensures that the user has sufficient permissions to perform installation tasks across the environment, which are crucial for setting up and configuring the connectors correctly. Details about user roles and permissions can be found in the CyberArk Privilege Cloud installation and configuration guide.
NEW QUESTION # 32
What is a requirement when installing the PSM on multiple Privileged Cloud Connector servers?
- A. In-domain servers cannot be used when deploying multiple PSM servers.
- B. Additional Privilege Cloud Connector servers cannot have CPM installed.
- C. All PSMs in the environment must be configured to use load balancing.
- D. Each PSM must have the same path to the same recordings directory.
Answer: D
Explanation:
When installing the Privileged Session Manager (PSM) on multiple servers, it is required that each PSM installation has the same path to the same recordings directory. This is necessary to ensure that session recordings are stored consistently across different PSM instances, which is important for high availability and load balancing implementations, as well as for maintaining a unified audit trail.
Reference:
CyberArk documentation on installing multiple PSM servers
NEW QUESTION # 33
......
Exam Dumps CPC-SEN Practice Free Latest CyberArk Practice Tests: https://www.exams4collection.com/CPC-SEN-latest-braindumps.html
CPC-SEN Exam Questions | Real CPC-SEN Practice Dumps: https://drive.google.com/open?id=1gqXNPIF_XX50-eXncV5r9fE-v7VlmQ6y
