[Apr-2024] Verified 1z0-1054-23 dumps Q&As - 1z0-1054-23 dumps with Correct Answers
The Best Oracle Financials Cloud Study Guide for the 1z0-1054-23 Exam
NEW QUESTION # 16
You are capturing rental costs for a building in a corporate cost center. At month end, you want to allocate those costs to the cost centers in the building based on the floor area occupied. A statistical journal has been entered to record the floor area. You use Calculation Manager to create the allocation.
Where do you reference the statistical balance within the allocation component?
- A. Offset
- B. Target
- C. Allocation Range
- D. Source
- E. Basis
Answer: D
Explanation:
Explanation
The source is where you specify the amount to be allocated. You can use various sources, such as account balances, fixed amounts, or statistical balances. In this case, you want to use the statistical balance of the floor area as the source of the allocation. The basis is where you specify the driver or factor that determines how the source amount is distributed among the targets. The target is where you specify the destination accounts that receive the allocated amount. The offset is where you specify the account that records the opposite side of the allocation entry. The allocation range is where you specify the scope of the allocation, such as the ledger, balancing segment, or legal entity. References:
Oracle Financials Cloud Implementing Enterprise Structures and General Ledger, Chapter 3:
Allocations and Periodic Entries, Allocation Components
Oracle Financials Cloud Using General Ledger, Chapter 3: Allocations and Periodic Entries, Overview
NEW QUESTION # 17
Which two statements are true about the Intercompany Reconciliation report?
- A. It displays the intercompany receivables and intercompany payables balances in summary for a period.
- B. It includes ledger balancing lines generated when the primary balancing segment value (BSV) is in balance, but either the second or third BSVs are not.
- C. It displays all clearing company balancing lines for a period.
- D. It can be run using an additional currency and conversion rate that converts all amounts into a common currency for comparison.
- E. You can only drill down to the General Ledger journal and then from there to the Subledger journal entry.
Answer: A,D
Explanation:
Explanation
The Intercompany Reconciliation report is a tool that helps you reconcile your intercompany transactions and identify any discrepancies between the provider and receiver sides. The report shows the entered or transaction amount of the accounting entries booked to the intercompany receivables and payables accounts for a pair of provider and receiver legal entities. The accounted amounts may be different when the conversion rates used for the intercompany receivables and payables are different. Therefore, you can run the report using an additional currency and conversion rate that converts all amounts into a common currency for comparison.
This option helps you manage the currency risk and the conversion rate fluctuations for intercompany transactions. The report also displays the intercompany receivables and payables balances in summary for a period, and any differences between them. You can drill down on the links to view the balances by source and then by journal lines. You have full drill-down capabilities to the general ledger journal, subledger accounting entry, and source receivables or payables transaction. References:
Intercompany Reconciliation
Intercompany Reconciliation Reports
NEW QUESTION # 18
You are using the Create Budgets in a Spreadsheet option to load your budget balances into the General Ledger balances cube. Your FYXX Budget is not appearing in the Budget Name list of values.
What are two reasons for this?
- A. A value for the budget scenario is not created.
- B. Publish Chart of Accounts Dimension Members and Hierarchies to the Balances Cube has not been run.
- C. Transfer Budget Balances to Budget Cubes has not been run.
- D. Budgeting is not enabled in the Ledger options.
- E. The Create Scenario Dimension Members program has not been run.
Answer: A,E
Explanation:
Explanation
To use the Create Budgets in a Spreadsheet option, you need to have a budget scenario value and a scenario dimension member for your budget. A budget scenario value is a user-defined value that identifies a budget, such as FYXX Budget. A scenario dimension member is a member of the scenario dimension in the General Ledger balances cube that corresponds to a budget scenario value, such as FYXX_Budget. You can create budget scenario values and scenario dimension members using the Manage Budget Scenario Values task or the Create Scenario Dimension Members program. If you do not create these values and members, your budget will not appear in the Budget Name list of values in the spreadsheet. Therefore, the two reasons for your issue are:
A value for the budget scenario is not created: You need to create a budget scenario value for your budget using the Manage Budget Scenario Values task. This task enables you to define and maintain budget scenario values and their attributes, such as description, start date, end date, and status. You can also specify whether the budget scenario value is enabled for budgeting and reporting. You need to enable the budget scenario value for budgeting to use it in the spreadsheet.
The Create Scenario Dimension Members program has not been run: You need to run the Create Scenario Dimension Members program to create scenario dimension members for your budget scenario values. This program automatically creates scenario dimension members for all budget scenario values that are enabled for budgeting and do not have existing scenario dimension members. You can run this program manually or schedule it to run periodically. You need to run this program after you create or update budget scenario values to ensure that they are reflected in the scenario dimension.
References:
Create Budgets in a Spreadsheet
Manage Budget Scenario Values
Create Scenario Dimension Members
NEW QUESTION # 19
Manage Chart of Accounts Structure and Instance
Scenario
Your client is implementing Oracle Fusion Cloud Financials. The decision is to have a 5-segment Chart of Accounts: Company, Cost Center, Account, Product, and Intercompany. You are working in the General Ledger team and will be responsible for creating the Chart of Accounts Structure and Instance for the Chart of Accounts.
Task 1
Create a Chart of Accounts Structure and Instance for the following Chart of Accounts:
Note:
Prefix all your setups with 07, where 07 is your candidate ID
There is one balancing segment.
Choose the appropriate segment labels.
. For the purpose of this test there is no need to deploy the flexfield.
. Valid code combinations should be added to the Code Combination table automatically.
Shorthand aliases will not be implemented.
. Accept the defaults for the instance segments.
Answer:
Explanation:
See the Explanation for the complete Solution.
Explanation
Here are the steps you need to follow:
Navigate to the Setup and Maintenance work area and search for the task Manage Chart of Accounts Structures.
Click on the Create icon to create a new Chart of Accounts Structure. Enter the following information:
Structure Code: 07COA
Structure Name: 07 Chart of Accounts
Description: Chart of Accounts for candidate 07
Number of Segments: 5
Click on the Next button to define the segments. Enter the following information for each segment:
Segment Number: 1
Segment Name: Company
Value Set Code: 07Corporate Company
Value Set Name: 07 Corporate Company
Maximum Size: 3
Balancing: Yes
Segment Label: Company
Segment Number: 2
Segment Name: Cost Center
Value Set Code: 07Corporate Cost Center
Value Set Name: 07 Corporate Cost Center
Maximum Size: 4
Balancing: No
Segment Label: Cost Center
Segment Number: 3
Segment Name: Account
Value Set Code: 07Corporate Account
Value Set Name: 07 Corporate Account
Maximum Size: 8
Balancing: No
Segment Label: Natural Account
Segment Number: 4
Segment Name: Product
Value Set Code: 07Corporate Product
Value Set Name: 07 Corporate Product
Maximum Size: 3
Balancing: No
Segment Label: Product
Segment Number: 5
Segment Name: Intercompany
Value Set Code: 07Corporate Company
Value Set Name: 07 Corporate Company
Maximum Size: 3
Balancing: No
Segment Label: Intercompany
Click on the Next button to review the summary and click on the Save and Close button to save the Chart of Accounts Structure.
Navigate to the Setup and Maintenance work area and search for the task Manage Chart of Accounts Structure Instances.
Click on the Create icon to create a new Chart of Accounts Structure Instance. Enter the following information:
Structure Code: 07COA
Structure Name: 07 Chart of Accounts
Description: Chart of Accounts for candidate 07
Chart of Accounts Structure: 07COA
Enabled: Yes
Allow Dynamic Inserts: Yes
Click on the Next button to review the summary and click on the Save and Close button to save the Chart of Accounts Structure Instance.
You have successfully created a Chart of Accounts Structure and Instance for the given scenario. For more information, you can refer to the following resources:
Chart of Accounts Structures and Instances
Chart of Accounts Components
Minimum Steps For Financial Enterprise Structures Configuration
Overview of Creating and Configuring Chart of Accounts Structure and Instances
NEW QUESTION # 20
A subsidiary company is about to configure their General Ledger in a highly regulated country where there is a legal requirement to produce fiscal reports under local GAAP. Subledgers transferring to General Ledger must use the local currency, and there is a requirement to report to the parent company (not local currency) using International Financial Reporting Standards (IFRS).
Which two ledger types should be configured to fulfill this reporting requirement?
- A. Primary ledger with the local accounting convention
- B. Reporting currency with the local accounting convention
- C. Reporting currency with the IFRS accounting convention
- D. Primary ledger with the IFRS accounting convention
- E. Secondary ledger with the IFRS accounting convention
Answer: A,E
Explanation:
Explanation
A primary ledger is the main ledger for a legal entity or business unit that records all accounting transactions and maintains the accounting balances. A secondary ledger is an optional ledger that is associated with a primary ledger and maintains accounting balances in a different accounting representation. A reporting currency is an optional currency that is associated with a primary ledger and maintains accounting balances in a different currency. In this scenario, the subsidiary company needs to produce fiscal reports under local GAAP and local currency, as well as report to the parent company using IFRS and not local currency.
Therefore, the subsidiary company should configure a primary ledger with the local accounting convention and local currency, and a secondary ledger with the IFRS accounting convention and not local currency. A reporting currency with the local accounting convention or the IFRS accounting convention would not meet the requirement, as it would only maintain balances in a different currency, not a different accounting representation. A primary ledger with the IFRS accounting convention would not meet the requirement, as it would not comply with the local GAAP. References:
Oracle Financials Cloud Implementing Enterprise Structures and General Ledger, Chapter 2: Ledgers, Primary Ledgers, Secondary Ledgers, and Reporting Currencies Oracle Financials Cloud Using General Ledger, Chapter 1: Introduction, Ledgers and Subledgers, Primary Ledgers, Secondary Ledgers, and Reporting Currencies
NEW QUESTION # 21
You already ran Translation, but a last-minute adjusting journal entry in your ledger currency was entered and posted after you consolidated your results.
What is Oracle's recommended practice when this occurs?
- A. Translate only the adjusting journal entry.
- B. Rerun Translation and then reconsolidate your results.
- C. Enter another adjusting journal entry in the target currency to true up the balances.
- D. Rerun Revaluation and then rerun Translation.
Answer: B
Explanation:
Explanation
According to Oracle's documentation, if you enter and post additional journal entries in your ledger currency after you run translation, you should rerun translation for the entire ledger or ledger set to ensure that all balances are translated using the same exchange rates. Then, you should reconsolidate your results to reflect the updated translated balances. References:
Using General Ledger, page 9-7: "If you enter and post additional journal entries in your ledger currency after you run translation, you should rerun translation for the entire ledger or ledger set." Using General Ledger, page 9-8: "After you run translation, you can consolidate your results to create a consolidated balance sheet and income statement." Implement General Ledger, page 2-10: "You can translate and consolidate balances as part of the period close process."
NEW QUESTION # 22
Which delivered role can access the full functionality of Functional Setup Manager?
- A. Any functional user
- B. IT Security Manager
- C. Application Implementation Consultant
- D. Application Implementation Manager
- E. Functional Setup Manager Superuser
Answer: D
Explanation:
Explanation
According to Oracle documentation2, the delivered role that can access the full functionality of Functional Setup Manager is Application Implementation Manager. Functional Setup Manager is a tool that enables you to manage and perform all of the setup tasks required for an application implementation. Application Implementation Manager is a predefined role that grants access to Functional Setup Manager and all of its features, such as setup tasks, implementation projects, setup export and import, and setup reports. Therefore, option A is correct. Option B is incorrect because Functional Setup Manager Superuser is not a delivered role.
Option C is incorrect because IT Security Manager is a role that grants access to security-related tasks, not Functional Setup Manager. Option D is incorrect because any functional user does not have access to Functional Setup Manager by default. Option E is incorrect because Application Implementation Consultant is not a delivered role.
NEW QUESTION # 23
Challenge 2
Manage Shorthand Aliases
Scenario
Your client intends to utilize the Shorthand Aliasfeature and would like to see how the aliases willappear when entering transactions.
Task 2
Create a shorthand alias for the US Chart of Accounts to record Revenue Domestic for Supremo Fitness, Line of Business 2, and US Operations Cost Center.
Note:
. Prefix your alias name with 07, where 07 is your exam ID.
. There is no Product or Intercompany impact.
Answer:
Explanation:
See the Explanation for the complete Solution.
Explanation
Here are the steps you need to follow:
In the Setup and Maintenance work area, go to the following:
Offering: Financials
Functional Area: Financial Reporting Structures
Task: Manage Shorthand Aliases
Select the chart of accounts that you want to create the alias for. In this case, it is the Corporate chart of accounts.
Click on the Add Row icon to create a new alias. Enter the following information:
Alias Name: RevDom
Account Template: 101-2000-400000-000-000-000
Description: Revenue Domestic for Supremo Fitness, Line of Business 2, and US Operations Cost Center Enabled: Yes Start Date: Today's date End Date: Blank Click on the Save and Close button to save the alias.
You have successfully created a shorthand alias for the US Chart of Accounts. For more information, you can refer to the following resources:
Account Aliases
Enter a GL Account Alias
Short Hand Alias in Fusion Financials Key Flexfield
How to Enable Account Shorthand Aliases
NEW QUESTION # 24
Which two allow access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis?
(Choose two.)
- A. Universal Content Management Workspace
- B. Scheduled Processes
- C. Reports and Analytics
- D. Enterprise Performance Management Workspace
- E. Business Process Management Workspace
Answer: C,D
Explanation:
Explanation
The two options that allow access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis are Reports and Analytics and Enterprise Performance Management Workspace. Reports and Analytics is a tool that allows users to access, create, edit, and share reports and analyses using data from various sources, including Oracle Transactional Business Intelligence. Users can access Reports and Analytics from variouspages in Oracle Fusion Applications or from Oracle Fusion Cloud Service Console. Enterprise Performance Management Workspace is a tool that allows users to access, create, edit, and share reports and analyses using data from various sources, including Oracle Transactional Business Intelligence. Users can access Enterprise Performance Management Workspace from Oracle Fusion Cloud Service Console or from a web browser. Universal Content Management Workspace is not an option that allows access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis, as this is a tool that allows users to manage documents and other digital content in Oracle Fusion Applications. Business Process Management Workspace is not an option that allows access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis, as this is a tool that allows users to monitor and manage business processes in Oracle Fusion Applications. Scheduled Processes is not an option that allows access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis, as this is a tool that allows users to submit, monitor, and manage scheduled processes in Oracle Fusion Applications. Reference: Oracle FinancialsCloud: General Ledger 2022 Implementation Professional Objectives - Use Oracle Transactional Business Intelligence (OTBI) 12
NEW QUESTION # 25
Your customer uses Financials Cloud, Projects, Inventory, and SCM.
Which two statements are true regarding intercompany accounting for these products? (Choose two.)
- A. Intercompany balancing rules in General Ledger need to be mapped with the intercompany configuration in each product.
- B. Each product has its own Intercompany Accounting feature that needs to be configured separately.
- C. In Financials Cloud, Intercompany Balancing Rules are used to balance both cross-ledger allocation journals and single-ledger journals.
- D. Intercompany Balancing Rules are defined centrally and applied across Financials and Projects.
Answer: B,D
Explanation:
Explanation
According to Oracle documentation1, the following statements are true regarding intercompany accounting for Financials Cloud, Projects, Inventory, and SCM: Each product has its own Intercompany Accounting feature that needs to be configured separately, and Intercompany Balancing Rules are defined centrally and applied across Financials and Projects. Intercompany accounting is the process of recording transactions between related entities within an enterprise or between groups in the same legal entity. Each product has its own Intercompany Accounting feature that enables you to create, process, and reconcile intercompany transactions.
Intercompany Balancing Rules are used to generate balancing entries for journals that are out of balance by legal entity or primary balancing segment values. Intercompany Balancing Rules are defined in General Ledger and applied across Financials and Projects. Therefore, options A and C are correct. Option B is incorrect because Intercompany Balancing Rules are not used to balance cross-ledger allocation journals.
Option D is incorrect because Intercompany balancing rules in General Ledger do not need to be mapped with the intercompany configuration in each product.
NEW QUESTION # 26
You need to add new transactional attributes to the journal approval notification in an implementation project.
Which two Business Intelligence catalog objects should you copy (or customize) and edit?
- A. Style template
- B. Layout template
- C. Output type
- D. Data model
- E. Sub template
Answer: B,D
Explanation:
Explanation
To modify the journal approval notification, you need to copy (or customize) and edit the layout template and the data model of the Analytics Publisher report. The layout template defines the appearance and content of the notification, such as the text, fields, tables, and images. The data model defines the data sources and queries that provide the data for the notification, such as the journal attributes, amounts, and statuses. You can use Template Builder for Word to edit the layout template and Analytics Publisher to edit the data model. You also need to download the Workflow Notification Subtemplate, which is a common subtemplate that contains the header and footer of the notification. You can preview the modified notification using the subtemplate and the data model. References:
Modify Journal Approval Notifications with Analytics Publisher
[Creating Analytics and Reports for Financials Cloud]
NEW QUESTION # 27
You are using Oracle General Ledger (GL), Oracle Payables, and Oracle Receivables and you want to prevent the closure of the GL period if the corresponding subledger period is not closed. How do you achieve this?
- A. Set the ORA_GLJNCLD_STRICT_PRD_CLOSE profile option to yes.
- B. Set the relevant option on the Specify Ledger Options page.
- C. Opt in to the Prevent Period Close option for the offering.
- D. You don't have to do anything; this option is enabled automatically.
Answer: B
Explanation:
Explanation
You can prevent the closure of a General Ledger accounting period if the accounting period for any of the corresponding subledgers is still open, or if incomplete accounting entries or transactions exist for the period.
This can help ensure an effective period close process that validates all transactions are complete and aren't held up during the close. To enable this feature, you need to set the relevant option on the Specify Ledger Options page for each primary ledger. The option is called Prevent General Ledger Period Closure When Open Subledger Periods Exist and it is located in the Period Close section. You can also specify which subledgers to include or exclude from the validation, except for Assets, which is automatically excluded by default.
References:
How to Prevent a General Ledger Period from Closing When Open Subledger Periods Exist Period Close Components Review: Prevent General Ledger Period Closure When Open Subledger Periods Exist
NEW QUESTION # 28
You have a requirement to have invoices generated for certain Intercompany transactions.
Where do you enable invoicing?
- A. the transaction category
- B. the transaction source
- C. the transaction batch
- D. the transaction type
Answer: D
Explanation:
Explanation
According to Oracle documentation2, you enable invoicing for certain Intercompany transactions on the transaction type. The transaction type defines the characteristics of an intercompany transaction, such as whether it requires approval, whether it generates invoices, and what accounting rules apply. You can enable invoicing for a transaction type by selecting the Invoicing Options tab and choosing the invoice method, invoice source, invoice batch source, and invoice rule. Therefore, option D is correct. Option A is incorrect because you do not enable invoicing on the transaction batch. Option B is incorrect because you do not enable invoicing on the transaction category. Option C is incorrect because you do not enable invoicing on the transaction source.
NEW QUESTION # 29
A new Oracle Fusion Cloud client needs to produce an income statement on a regular basis using Smart View.
Which Smart View tool would be best for this?
- A. Smart Queries
- B. Account Groups
- C. Query Designer
- D. Smart Slices
Answer: C
Explanation:
Explanation
Query Designer is a Smart View tool that enables you to create and modify ad hoc queries on General Ledger balances cubes. You can use Query Designer to select the dimensions, members, and filters that you want to include in your query, and then retrieve the data in a grid format in Excel. You can also save, open, and refresh your queries as needed. Query Designer is the best tool for producing an income statement on a regular basis using Smart View, because it allows you to easily access and analyze the income and expense accounts, as well as the ledger, period, currency, and other dimensions that are relevant for your report. You can also customize the layout and format of your grid, and use Excel functions and features to enhance your report.
References:
Overview of Smart View
Creating an Ad Hoc Analysis in Smart View
NEW QUESTION # 30
Which two statements are true about balances cubes in General Ledger?
- A. New dimensions can be added to a General Ledger balances cube.
- B. They are updated automatically when the Translation process is run.
- C. A new balances cube is created for a unique combination of ledger and currency.
- D. They are updated automatically when the Revaluation process is run.
- E. They are updated automatically when the General Ledger period is opened.
Answer: A,C
Explanation:
Explanation
Balances cubes are multidimensional databases that store financial balances for interactive reporting and analysis. A balances cube is created for each unique combination of ledger and currency, and it contains dimensions such as chart of accounts segments, periods, scenarios, and other user-defined attributes. New dimensions can be added to a balances cube by using the Manage Balances Cube Dimensions task in General Ledger. Balances cubes are updated automatically when journals are posted in General Ledger, and they can also be refreshed manually by using the Refresh Balances Cube task. Balances cubes are not affected by the Translation or Revaluation processes, as these processes only update the balances tables in General Ledger.
References:
Overview of Oracle General Ledger Balances Cubes1
Considerations for General Ledger Balances Cubes2
Overview of Oracle Essbase Balances Cubes3
NEW QUESTION # 31
A company implementing Oracle General Ledger has a business requirement to report under two accounting conventions and is considering setting up a primary and secondary ledger. The two accounting standards are very close.
Which data conversion level should you recommend to ensure only manual journals will be entered in the secondary ledger?
- A. Adjustment only level
- B. FBDI level
- C. Balance level
- D. Journal level
- E. Subledger level
Answer: A
Explanation:
Explanation
The adjustment only level is the data conversion level that ensures only manual journals will be entered in the secondary ledger. This level means that no data is copied from the primary ledger to the secondary ledger automatically. Instead, the user can enter manual adjustments in the secondary ledger to reflect the differences between the two accounting standards. This level is suitable for scenarios where the accounting methods or charts of accounts are very close between the primary and secondary ledgers, and there is no need to maintain detailed journals or subledger transactions in the secondary ledger. References: Primary Ledgers, Secondary Ledgers, and Reporting Currencies, High Volume Data Migration Considerations for General Ledger, Reporting Currencies - Conversion Level Balance
NEW QUESTION # 32
You notice that a lot of erroneous address data is being saved. How do you ensure that only valid addresses are entered in the system?
- A. Define the Geography Validation for Country option to Error.
- B. Redefine the geography hierarchy.
- C. Define the Geography Validation for Country option to No Validation.
- D. Redefine the location structure.
Answer: A
Explanation:
Explanation
Geography validation is a feature that enables you to validate the address information entered for a location against the geography hierarchy defined for a country. You can set the Geography Validation for Country option to one of the following values:
No Validation: No validation is performed on the address information.
Warning: A warning message is displayed if the address information does not match the geography hierarchy, but the user can still save the address.
Error: An error message is displayed if the address information does not match the geography hierarchy, and the user cannot save the address until the error is corrected. To ensure that only valid addresses are entered in the system, you should set the Geography Validation for Country option to Error. This will prevent users from saving erroneous address data and enforce data quality and accuracy. References:
Oracle Financials Cloud: Enterprise Structures with General Ledger Implementation, Chapter 2: Define Geographies, Section: Geography Validation Oracle Financials Cloud: Implementing Enterprise Structures and General Ledger, Chapter 2: Define Geographies, Section: Geography Validation
NEW QUESTION # 33
You are trying to run a Financial Reporting Web Studio report from Financial Reporting Center. However, it is not appearing as a choice.
Which are two reasons for this? (Choose two.)
- A. You have not saved it in the Shared Folder/Custom/Financials directory.
- B. You have not downloaded the report to your local drive.
- C. You have not saved it in the MyFolders directory.
- D. You have not uploaded it to Financial Reporting Center.
Answer: C,D
Explanation:
Explanation
According to Oracle documentation, two reasons why a Financial Reporting Web Studio report may not appear as a choice in Financial Reporting Center are: You have not saved it in the Shared Folder/Custom/Financials directory, and you have not uploaded it to Financial Reporting Center. Financial Reporting Web Studio enables you to design and generate reports with grids, charts, images, and text boxes using data from various sources. Financial Reporting Center enables you to access and run all types of reports from a single user interface. To make a Financial Reporting Web Studio report available in Financial Reporting Center, you must save it in the Shared Folder/Custom/Financials directory and upload it to Financial Reporting Center using Workspace. Therefore, options A and C are correct. Option B is incorrect because saving it in the MyFolders directory does not make it available in Financial Reporting Center. Option D is incorrect because downloading it to your local drive does not make it available in Financial Reporting Center.
NEW QUESTION # 34
Your ledger currency is USD. At month end you have a balance on the Accounts Payable Liability Account of
100,000 Euros which is equivalent to USD 136,550. This balance needs to be revalued.
The month end exchange rate for revaluation is 1 Euro = 1.3755 USD.
What two statements are true for the resulting revaluation run? (Choose two.)
- A. The original journal entry in Euros remains the same.
- B. You have an unrealized exchange loss recorded.
- C. You have an unrealized exchange gain recorded.
- D. There is no unrealized exchange gain or loss calculated.
- E. The original journal entry in Euros is updated.
Answer: B,C
Explanation:
Explanation
The two true statements for the resulting revaluation run are that you have an unrealized exchange gain recorded and you have an unrealized exchange loss recorded. Revaluation is a process that adjusts foreign currency balances to reflect current exchange rates at period end. Revaluation creates journal entries to record unrealized exchange gains or losses on foreign currency balances based on revaluation rates defined for each currency. In this scenario, you have a balance on the Accounts Payable Liability Account of 100,000 Euros which is equivalent to USD 136,550 at month end. The month end exchange rate for revaluation is 1 Euro =
1.3755USD. Therefore, after revaluation, your balance on the Accounts Payable Liability Account will be USD 137,550 (100,000 x 1.3755). This means you have an unrealized exchange gain of USD 1,000 (137,550 -
136,550) on your Accounts Payable Liability Account because your liability in foreign currency has decreased in terms of your ledger currency due to exchange rate fluctuations. Revaluation will create a journal entry to debit your Accounts Payable Liability Account by USD 1,000 and credit your Unrealized Exchange Gain Account by USD 1,000 to record this gain. The original journal entry in Euros is not updated by revaluation, as revaluation only creates new journal entries to adjust foreign currency balances in terms of ledger currency based on revaluation rates. There is no unrealized exchange gain or loss calculated by revaluation, as revaluation does calculate unrealized exchange gains or losses on foreign currency balances based on revaluation rates.
NEW QUESTION # 35
Which two statements are true about infotiles and infolets?
- A. Infotiles have Front view. Back view, and Expanded view.
- B. You can refresh infolets to see up-to-date data.
- C. You can create your own user-defined infolets.
- D. Infolets are accessed only from the News Feed home page layout.
- E. Infotiles pull data from a Smart View analysis.
Answer: A,B
Explanation:
Explanation
Infotiles and infolets are graphical components that display key information and metrics on the General Accounting dashboard. They help users access many sources of information across the enterprise in an efficient, timely, and engaging manner. Infolets can be refreshed to see up-to-date data by clicking the Refresh icon on the infolet. Infotiles have three views: Front view, which shows a summary of the most important information; Back view, which shows additional details and actions; and Expanded view, which shows a full-screen view of the infotile content. References:
Oracle Financials Cloud: Using General Ledger, Chapter 6: Financial Reporting and Analysis, Section:
General Accounting Infolets
Oracle Financials Cloud: Implement General Ledger, Chapter 1: Overview of Oracle Financials Cloud, Section: Overview of Using Infolets to Identify Issues and Prioritize Tasks
NEW QUESTION # 36
What are two uses of the Column Flattening and Row Flattening features? (Choose two.)
- A. Create additional versions of a tree.
- B. Set the status of a tree to active.
- C. Verify correctness of trees.
- D. Optimize parent/child relationships.
- E. View information for runtime performance.
Answer: B,C
Explanation:
Explanation
The two uses of the Column Flattening and Row Flattening features are to set the status of a tree to active and to verify correctness of trees. Column Flattening and Row Flattening are features that optimize parent-child information for run-time performance by storing additional rows or columns in a table for instantly finding all descendants or ancestors of a node without initiating a recursive query. Column Flattening and Row Flattening are required to set the status of a tree to active, as they ensure that the tree data is consistent and accurate.
Column Flattening and Row Flattening are also useful to verify correctness of trees, as they allow users to view and analyze the flattened hierarchy data using various tools such as Oracle Analytics Publisher or Oracle Transactional Business Intelligence. You do not use Column Flattening and Row Flattening to create additional versions of a tree, as this is a feature that allows users to copy an existing tree version and make changes to it without affecting the original version. Youdo not use Column Flattening and Row Flattening to view information for runtime performance, as this is a feature that allows users to monitor and measure the performance of various processes or tasks in Oracle Fusion Applications. You do not use Column Flattening and Row Flattening to optimize parent/child relationships, as this is a feature that allows users to define rules and constraints for how nodes can be related to each other in a tree structure. Reference: Oracle Financials Cloud: General Ledger 2022 Implementation Professional Objectives - Define Chart of Accounts 12
NEW QUESTION # 37
......
1z0-1054-23 certification guide Q&A from Training Expert Exams4Collection: https://www.exams4collection.com/1z0-1054-23-latest-braindumps.html
1z0-1054-23 Certification Overview Latest 1z0-1054-23 PDF Dumps: https://drive.google.com/open?id=126eVrsFQ16rvqdV8LL6avqWn_poTJh_I
