[Full-Version] 2024 New Exams4Collection D-UN-DY-23 PDF Recently Updated Questions [Q21-Q40]

Share

[Full-Version] 2024 New Exams4Collection D-UN-DY-23 PDF Recently Updated Questions

D-UN-DY-23 Exam with Guarantee Updated 38 Questions

NEW QUESTION # 21
What is the maximum size of a drive partnership group when expanding a Dynamic Pool?

  • A. 84 drives
  • B. 64 drives
  • C. 32 drives
  • D. 96 drives

Answer: C

Explanation:
Explanation
A drive partnership group is a collection of drives of the same drive type that have been combined into a hidden dynamic pool object. Each drive within a dynamic pool can only be part of a single drive partnership group, and a drive will never change the drive partnership group. The maximum size of a drive partnership group is 32 drives, regardless of the drive type or size. When expanding a dynamic pool, the system will automatically create new drive partnership groups as needed, and distribute the drives evenly across the groups. The number of drive partnership groups in a dynamic pool is equal to the number of drives divided by
32, rounded up to the nearest integer. References: Dell Unity: Dynamic Pools2, page 5.


NEW QUESTION # 22
What does the Dell Unity XT system do after a NAS server starts outbound traffic to an external service?

  • A. Selects interfaces that are based on advance static routes
  • B. Uses Packet Reflect for outbound communication
  • C. Uses the active production interface
  • D. Creates an active interface buffer cache in DRAM

Answer: B

Explanation:
Explanation
Packet Reflect is a feature that enables the Dell Unity XT system to use the same interface for outbound communication that was used for inbound communication. This feature is useful when the Dell Unity XT system needs to initiate outbound traffic to an external service, such as DNS, NTP, LDAP, or SMTP. By using Packet Reflect, the Dell Unity XT system can avoid routing issues, firewall restrictions, or network address translation problems that may occur when using a different interface for outbound communication. When a NAS server starts outbound traffic to an external service, the Dell Unity XT system uses Packet Reflect to send the packets through the same interface that received the packets from the external service. Therefore, the correct answer is D. Uses Packet Reflect for outbound communication. References:
Dell EMC Unity: NAS Capabilities
Dell EMC Unity: Unisphere Overview


NEW QUESTION # 23
What is a benefit of using vVols?

  • A. They enable the automatic import of capability profiles from vSphere to Unisphere.
  • B. Individual VMs on a datastore can be snapped.
  • C. They enable the assignment of isolated file storage partitions.
  • D. All VMs on a datastore are snapped simultaneously.

Answer: B

Explanation:
Explanation
A benefit of using vVols is that individual VMs on a datastore can be snapped. vVols are virtual volumes that are stored on a storage array and managed by vSphere. They enable granular control and management of VM storage. With vVols, each VM has its own set of virtual disks that are mapped to corresponding storage objects on the array. This allows the array to perform snapshot operations on individual VMs without affecting other VMs on the same datastore.
References: [Dell EMC Unity: VMware vSphere Virtual Volumes (vVols) Implementation]


NEW QUESTION # 24
An administrator notices that the communications between Unisphere and the storage system get interrupted.
Which service task should the administrator perform to fix the issue with minimal impact?

  • A. Reboot Storage Processor
  • B. Reinitialize
    C Enable SSH
  • C. Restart Management Software

Answer: C

Explanation:
Explanation
The service task that the administrator should perform to fix the issue with minimal impact is Restart Management Software. This service task restarts the management software on both storage processors without affecting the data services or the host I/O. This can resolve the communication issues between Unisphere and the storage system. Reinitialize, Enable SSH, and Reboot Storage Processor are service tasks that have more impact and risk than Restart Management Software.
References: [Dell EMC Unity: Unisphere Overview], [Dell EMC Unity: Service Tasks]


NEW QUESTION # 25
Which snapshot option is set automatically when a Pool is configured?

  • A. Pool Automatic Deletion Policy
  • B. Total Pool Consumption
  • C. Snapshot Pool Consumption

Answer: A

Explanation:
Explanation
The snapshot option that is set automatically when a pool is configured is the Pool Automatic Deletion Policy.
This option determines how the system handles the deletion of snapshots when the pool reaches a certain threshold of capacity utilization. The user can choose between three policies: Never Delete, Delete Oldest, or Delete LowestPriority. The Total Pool Consumption and the Snapshot Pool Consumption are not snapshot options, but rather metrics that show the amount of pool space consumed by the pool data and the snapshots respectively.
References: [Dell EMC Unity: Storage Pools and RAID Groups], [Dell EMC Unity: Snapshots and Thin Clones]


NEW QUESTION # 26
A company needs to expand their dynamic pool by 10 TB. The current dynamic pool consists of 63 7.6 TB SSD drives that are configured for RAID 5 (12+1).
What is the minimum number of drives needed for the pool expansion?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

Explanation:
Explanation
To expand a dynamic pool, the number of drives added must be equal to or greater than the stripe width of the pool. The stripe width is the number of data drives plus the number of parity drives in a RAID group. In this case, the stripe width is 12 + 1 = 13. Therefore, the minimum number of drives needed for the pool expansion is 13. References: Dell EMC Unity: Dynamic Pools Technical White Paper1, page 8.


NEW QUESTION # 27
A storage administrator must configure replication from a production Dell Unity XT 680F to an offsite DR Dell Unity XT 480. Block resources must be replicated without data loss if the production site becomes unavailable. File resources can be replicated with an acceptable amount of data difference on the destination.
What replication configuration meets the requirements?

  • A. Set Unisphere resource filtering to All.
  • B. Configure the replication connection mode to Both.
  • C. Set an RPO of 0 on the synchronous replication sessions.
  • D. Configure the replication interfaces on the 4-port mezzanine card.

Answer: B

Explanation:
Explanation
To meet the requirements, the replication connection mode must be set to Both, which allows both synchronous and asynchronous replication sessions to be configured on the same connection. This way, block resources can use synchronous replication, which ensures zero data loss, and file resources can use asynchronous replication, which allows some data difference on the destination. Setting Unisphere resource filtering to All is not necessary, as it only affects the display of resources in the Unisphere GUI. Setting an RPO of 0 on the synchronous replication sessions is redundant, as synchronous replication always has an RPO of 0. Configuring the replication interfaces on the 4-port mezzanine card is not relevant, as it only affects the performance and availability of the replication network.
References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: Unisphere Overview]


NEW QUESTION # 28
What is the maximum time difference allowed between the current system time (UTC) and the NTP server time during the initial configuration of a Dell Unity system?

  • A. 17 min
  • B. 5 min
  • C. 15 min
  • D. 7 min

Answer: A

Explanation:
Explanation
If the time difference between the current system (UTC) time and the NTP server time is too large (approximately 17 minutes), the user cannot configure an NTP server during initial configuration. The user will need to adjust the time while in "Set time manually" mode before changing to "Enable NTP synchronization". This is to avoid potential issues with data replication, snapshots, and audit logs that rely on accurate time stamps. References: Dell EMC Unity: How to change System Time from 'Set time manually' option to NTP2, page 1.


NEW QUESTION # 29
Which are two ways to create an asynchronous replication session for a NAS server? (Choose two.)

  • A. Use NAS server properties.
  • B. Create replication interface.
  • C. Use the NAS server wizard.
  • D. Create replication connect.

Answer: A,C

Explanation:
Explanation
Two ways to create an asynchronous replication session for a NAS server are to use NAS server properties and to use the NAS server wizard. Both methods allow the user to select a source NAS server and a destination NAS server, and configure the replication settings, such as the RPO, the replication schedule, and the replication mode. Creating a replication connection or a replication interface are not ways to create an asynchronous replication session for a NAS server, but rather prerequisites for enabling replication between two Dell Unity systems.
References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: NAS Capabilities]


NEW QUESTION # 30
A deployment engineer has changed theSchedule Time Zoneunder the Settings menu. However, existing snapshots schedules continue to run at the previously configured time.
Why is this occurring?

  • A. The Unity management server was not restarted before time zone changes took effect.
  • B. Existing snapshot schedules cannot be updated to the same absolute time.
  • C. Existing snapshot schedules are not updated to the same absolute time when the time zone is changed.
  • D. The Unity system time is not set correctly and must be updated under system settings.

Answer: C

Explanation:
Explanation
When the Schedule Time Zone is changed under the Settings menu, it only affects the display of the time zone and the creation of new snapshot schedules. Existing snapshot schedules are not automatically adjusted to the new time zone, and will continue to run at the same absolute time as before. For example, if a snapshot schedule was created to run every day at 10:00 AM inGMT+1, and the Schedule Time Zone was changed to GMT+2, the snapshot schedule will still run at 10:00 AM in GMT+1, which is 11:00 AM in GMT+2. To update the existing snapshot schedules to the new time zone, the administrator must edit each schedule manually and change the start time accordingly. References: Dell EMC Unity: Snapshots and Thin Clones1, page 16.


NEW QUESTION # 31
On a Dell Unity XT file system asynchronous replication session, how many system Snapshots are required to support replication?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
Explanation
On a Dell Unity XT file system asynchronous replication session, four system Snapshots are required to support replication. Two system Snapshots are created on the source file system, and two system Snapshots are created on the destination file system. The source system Snapshots are used to track the changes that need to be replicated, and the destination system Snapshots are used to apply the changes and maintain a consistent point-in-time copy of the source data. The system Snapshots are automatically created and managed by the replication engine and are not visible to the user.
References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: File System Configuration]


NEW QUESTION # 32
A system administrator deployed a UnityVSA to their vSphere environment. They did not add the management IP to the UnityVSA during the installation.
Which command must be used to apply the management IP from the vSphere UnityVSA console?

  • A. svc_initial_config
  • B. svc_inject
  • C. svc_change_hw_config
  • D. svc_ipmi

Answer: A

Explanation:
Explanation
To apply the management IP from the vSphere UnityVSA console, the system administrator must use the svc_initial_config command. This command allows the user to configure the initial network settings for the UnityVSA, such as the management IP address, subnet mask, gateway, and DNS servers. The svc_ipmi command is used to configure the IPMI settings for the UnityVSA, such as the IPMI IP address, username, and password. The svc_change_hw_config command is used to change the hardware configuration of the UnityVSA, such as the number of CPU cores, memory size, and disk size. The svc_inject command is used to inject faults into the UnityVSA for testing purposes.
References: [Dell EMC UnityVSA Installation Guide], [Dell EMC UnityVSA Command Line Interface Reference Guide]


NEW QUESTION # 33
A storage engineer was asked to restore a LUN snapshot using a previous copy.
What is the correct sequence of steps for a restore process?

Answer:

Explanation:

Explanation

https://www.delltechnologies.com/asset/en-us/products/storage/industry-market/h15089-dell_emc_unity-snapsho


NEW QUESTION # 34
A storage administrator recently disabled the Advanced Deduplication on a LUN.
Which Dell Unity XT action can be used to remove the Advanced Deduplication savings from LUN?

  • A. Perform Local LUN Move.
  • B. Disable the Data Reduction.
  • C. Chanqe Tierinq Policy to Auto-Tier.
  • D. Unmask the LUNfrom host.

Answer: A

Explanation:
Explanation
When Advanced Deduplication is disabled on a LUN, the existing data that was deduplicated remains in its reduced state, and only new data written to the LUN is not deduplicated. To remove the Advanced Deduplication savings from the LUN, the administrator must perform a Local LUN Move operation, which copies the data from the source LUN to a destination LUN without deduplication. The destination LUN must have Advanced Deduplication disabled, and must be in the same storage pool as the source LUN. After the Local LUN Move is completed, the source LUN can be deleted and the destination LUN can be renamed as the original LUN. References: Dell Unity: Data Reduction2, page 9.


NEW QUESTION # 35
An administrator has configured a Host Group to have access to a storage object.
What are two benefits of this configuration? (Choose two.)

  • A. Provides multiple hosts access to the same LUNs
  • B. Provides multiple hosts access to the same VMFS Datastores
  • C. Ensures that block storage is replicated to the same hosts
  • D. Provides multiple hosts the same access to NFS Filesvstems
  • E. Ensures that snapshots are applied to all LUNs in the group

Answer: A,B

Explanation:
Explanation
A Host Group is a logical grouping of hosts that share the same access permissions to storage objects, such as LUNs, VMFS Datastores, or NFS Filesystems. By configuring a Host Group, an administrator can simplify the management of multiple hosts and ensure consistent access to the storage resources. Some of the benefits of using a Host Group are:
Provides multiple hosts access to the same VMFS Datastores: A VMFS Datastore is a block-based storage object that is formatted with the VMware File System (VMFS) and used to store virtual machine files. A VMFS Datastore can be shared by multiple hosts that are part of a VMware cluster. By adding these hosts to a Host Group and assigning the VMFS Datastore to the Host Group, the administrator can ensure that all the hosts have the same access permissions and can access the virtual machines on the Datastore.
Provides multiple hosts access to the same LUNs: A LUN is a block-based storage object that is presented to a host as a SCSI device. A LUN can be shared by multiple hosts that have the same operating system and use a cluster-aware file system. By adding these hosts to a Host Group and assigning the LUN to the Host Group, the administrator can ensure that all the hosts have the same access permissions and can access the data on the LUN.
References:
Dell EMC Unity: Host Configuration
Dell EMC Unity: VMware ESXi Hosts and Clusters


NEW QUESTION # 36
......

Latest D-UN-DY-23 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.exams4collection.com/D-UN-DY-23-latest-braindumps.html

D-UN-DY-23 Updated Exam Dumps [2024] Practice Valid Exam Dumps Question: https://drive.google.com/open?id=1Y2I46kjna8MNqoK27ukSfU3Cc2n1kS9X