HP New 2021 HPE0-J68 Test Tutorial (Updated 178 Questions)
HPE0-J68 Exam Questions Dumps, Selling HP Products
NEW QUESTION 90
What has to taken into account when performing capacity planning for HPE Nimble storage using deduplication?
- A. Deduplication is performed on a per volume basic
- B. Deduplication is performed on a per application category basic
- C. Deduplication is performed on a per array basic
- D. Deduplication is performed on a per pool and block size basic
Answer: D
NEW QUESTION 91
You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.
Which technology can be configured at 3PAR to support forwarding events from the array to the customer's monitoring application?
- A. IPMI
- B. NTP
- C. SNMPv3
- D. DMI
Answer: C
NEW QUESTION 92
You are demonstrating adding a new virtual volume for an HPE 3PAR Storeserv array for your customer.in addition to the volume name ,What is the minimum information required to create a virtual volume(select two)
- A. CPG
- B. Persona type
- C. Domain
- D. Host
- E. Size
Answer: A,E
NEW QUESTION 93
A customer is deploying a new StoreOnce VSA solution.
How can the necessary storage capacity be added to the VSA? (Choose two.)
- A. Verify sufficient capacity LTUs are available
- B. The Cloud bank container needs to be configured from the vCenter client
- C. The Cloud bank container needs to be configured once the VSA boots
- D. Add a new virtual hard disk to the virtual machine
Answer: B,D
NEW QUESTION 94
Which statement is correct when comparing functionalities of the AF and HF series in the Nimble storage portfolio? (Choose Two)
- A. >99.9999% availability is measured and guaranteed for AF and HF series arrays.
- B. HF series has a dedicated read cache and AF series does not have a dedicated reach cache.
- C. HF series supports storage snapshots and replication using Veeam Backup & Replication, HF and AF series support storage snapshots only
- D. Zero Copy Clones are a unique feature of All-Flash arrays within the Nimble Portfolio.
Answer: A,B
NEW QUESTION 95
A large enterprise is experiencing exponential data growth of their existing Oracle databases.
They are concerned about their increasing backup windows and the risk of non-compliance with recovery time objectives increase of data corruption in primary storage. Their primary storage is an 3PAR Storeserv 8400,and their backup target is an HPE StoreOnce System.
Which HPE storage solution allow the customer to migrate this risk?
- A. 3 PAR remote copy
- B. StoreOnce unified deduplication
- C. Catalyst in-Flight compression
- D. RMC Express protect
Answer: D
NEW QUESTION 96
A customer need to update the local sever at each of their branches keep up with the increasing demand for High-performance storage. The customer cannot afford to move to SAN at each state. Which HPE storage technology can increase performance for this customer?
- A. Smart Path
- B. SmartCache
- C. Persistent Cache
- D. Adaptive Flash Cache
Answer: B
NEW QUESTION 97
Which of the following are part of the SimpliVity Data Virtualization Platform architecture? (Choose two.)
- A. Data Management Layer
- B. User Management Layer
- C. Presentation Layer
- D. Security Layer
Answer: A,C
NEW QUESTION 98
You are presenting the HPE StoreEver portfolio to a media agency.
What advantage is offered when using LTFS?
- A. file encryption with public and private key management
- B. file and block data management within an HPE HSM solution
- C. WORM functionality for file, block and object storage access on tape
- D. file management capabilities will be provided with tape cartridges
Answer: D
NEW QUESTION 99
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICs are included in the configuration. You designed an Intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statement is correct when discussing the IRF limits for this configuration?
- A. A maximum of two switches can be used in an IRF stack when connecting storage.
- B. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
- C. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
- D. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
Answer: B
NEW QUESTION 100
A customer with an HPE 3PAR StoreServ needs to upgrade their aging backup solution to a more advanced solution using snapshots and deduplication.
Which HPE products would meet the customer's needs? (Choose two.)
- A. HPE Recovery Manager Central
- B. HPE 3PAR Remote Copy
- C. HPE StoreOnce
- D. HPE 3PAR File Persona
- E. HPE StoreEver
Answer: A,C
NEW QUESTION 101
You want to deploy Recovery Manager Central to a customer environment.
How can you accomplish this? (Choose two.)
- A. Deploy RMC on top of the virtual CentOS system using the GUI wizard
- B. Install RMC on top of the virtual or physical RHEL system using the GUI wizard
- C. Deploy an RMC virtual appliance to Microsoft Hyper-V hypervisor
- D. Deploy RMC on top of the virtual CentOS system using the CLI
- E. Deploy an RMC virtual appliance to VMware ESXi hypervisor
- F. Install RMC on the top of the virtual or physical RHEL system using the CLI
Answer: C,E
NEW QUESTION 102
You are designing a new HPE 3PAR StoreServ solution.
Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?
- A. Storage Sizing Tool
- B. One Config Advanced
- C. NinjaSTARS
- D. SAF Collect
Answer: B
NEW QUESTION 103
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?
- A. HPE 3PAR MPIO
- B. HPE 3PAR Access Guard
- C. HPE 3PAR Persistent Cache
- D. HPE 3PAR Persistent Ports
Answer: D
NEW QUESTION 104
Which functionality available in an HPE 3 Par StoreServ 8400 system that is not available in an HPE 3par Storesrve 7200
- A. Adaptive optimization and dynamic Optimization
- B. Persistent Checksum end-to-end data integrity (correct)
- C. Online import license
- D. Data at Rest Encryption
Answer: B
NEW QUESTION 105
A customer currently runs MSA 2040 SAS storage system with SFF drives. They are planning a hardware refresh. The customer is using virtual pools only, and is concerned about problematic data migration to the new platform.
How can the update to MSA2050 be performed?
- A. Peer migration license must be purchased for the online migration
- B. Peer migration license must be purchased for the offline migration
- C. Existing drives can be moved to the new system; both systems need to be online
- D. Existing drives can be moved to the new system; both systems need to be offline
Answer: B
NEW QUESTION 106
You are planning an upgrade to a customer's existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.
Which statement is correct about performing this upgrade?
- A. When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.
- B. Windows servers require host explorer is installed to ensure MPIO is unaffected.
- C. The MPIO service will do a failover, and the servers will continue to have access via two paths.
- D. As long as MEM driver is installed on VMware vSphere, no path failures are seen.
Answer: A
NEW QUESTION 107
A customer is evaluating an HPE 3PAR StoreServ system in a proof-of-concept project. The customer wants to receive emails about important storage system events and alerts.
What feature do you need to configure?
- A. Local Notification Service
- B. Secure Service Agent
- C. HPE OneView integration
- D. Real-time Alert Processing
Answer: A
NEW QUESTION 108
A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application ,priority ,and topology, while allowing failover to a non-preferred path if the preferred path fails, Which B-series FC switch functionality should be used to provide this?
- A. Frame filtering
- B. Enhanced group management
- C. Quality of services
- D. Traffic isolation Zones
Answer: D
NEW QUESTION 109
Which tool is used to configure an HPE MSA 2052?
- A. InfoSight
- B. CMC
- C. SSMC
- D. SMU
Answer: A
NEW QUESTION 110
A customer has the following requirements for a storage solution:
VMware environment
20 TB of standard business data
400 TB of video archive files
10 GB iSCSI connectivity
They are most concerned with the cost of the solution.
Which HPE storage solution offers the lowest cost while meeting the customer requirements?
- A. HPE Primera
- B. HPE Nimble
- C. HPE MSA
- D. HPE SimpliVity
Answer: A
NEW QUESTION 111
What is the benefit of HPE Synergy? (Choose two.)
- A. It supports up to three HPE StoreVirtual VSA nodes for storage RAID.
- B. It can use HPE 3PAR File Persona for object storage.
- C. It can prevent block storage services from HPE 3PAR as part of the resource pool.
- D. It supports HPE BladeSystem c-class FlexFabric interconnect modules.
- E. It can compose and reclaim DAS storage.
Answer: C,E
NEW QUESTION 112
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?
- A. Recovery Manager central
- B. StoreServ Peer Motion
- C. Store virtual Peer motion
- D. HPE 3PAR Remote Copy
Answer: A
NEW QUESTION 113
Which type of networking switch handles both Ethernet and fibre channel traffic?
- A. Converged
- B. Virtual
- C. Edge
- D. Director
Answer: A
NEW QUESTION 114
A small company has recently purchased an MSA and two B-series SN3000B switches. In an effort save money, they installed the solution themselves. They call you complaining they can now see the multiple volumes on the MSA after creating just a single volume.
What should you advise them to do?
- A. Enable MPIO on their host
- B. Set volume's tier affinity to Performance
- C. Enable Smart SAN on the MSA 2052
- D. Enable zoning on the SN3000B switches
Answer: A
NEW QUESTION 115
......
HPE0-J68 Cert Guide PDF 100% Cover Real Exam Questions: https://www.exams4collection.com/HPE0-J68-latest-braindumps.html
Pass HPE0-J68 Review Guide, Reliable HPE0-J68 Test Engine: https://drive.google.com/open?id=10I0K10YulfJHpuOfZxNLxR6Zga3m-nBe
