[Jan 04, 2022] Get Free Updates Up to 365 days On Developing 300-710 Braindumps
Best Quality Cisco 300-710 Exam Questions
Who should take the Securing Networks with Cisco Firepower (300-710 SNCF) Exam
People who wish to explore the power of the dynamic culture of the Cisco Learning Network to jump-start their certification and lifelong learning goals should take this exam. Those who want to get useful tools for IT training for all Cisco certifications should also get this certification. People with prior knowledge of Cisco Firepower Threat Defence, including policy configurations, integrations, deployments, management and troubleshooting, are highly recommended to take this exam and get themselves certified from Cisco.
List of target audience for this exam:
- Technical support personnel
- System engineers
- Channel partners and resellers
- Cisco integrators and partners
- Security administrators
- Network administrators
NEW QUESTION 80
What is the benefit of selecting the trace option for packet capture?
- A. The option indicated whether the destination host responds through a different path.
- B. The option limits the number of packets that are captured.
- C. The option indicates whether the packet was dropped or successful.
- D. The option captures details of each packet.
Answer: C
NEW QUESTION 81
A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface What must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?
- A. The destination MAC address is optional if a VLAN ID value is entered
- B. The output format option for the packet logs unavailable
- C. Only the UDP packet type is supported
- D. The VLAN ID and destination MAC address are optional
Answer: A
NEW QUESTION 82
Which policy rule is included in the deployment of a local DMZ during the initial deployment of a Cisco NGFW through the Cisco FMC GUI?
- A. deny ip any
- B. permit ip any
- C. a default DMZ policy for which only a user can change the IP addresses.
- D. no policy rule is included
Answer: D
Explanation:
Section: Deployment
NEW QUESTION 83
A network engineer is extending a user segment through an FTD device for traffic inspection without creating another IP subnet How is this accomplished on an FTD device in routed mode?
- A. by assigning an inline set interface
- B. by leveraging the ARP to direct traffic through the firewall
- C. by bypassing protocol inspection by leveraging pre-filter rules
- D. by using a BVI and create a BVI IP address in the same subnet as the user segment
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
NEW QUESTION 84
An engineer is implementing Cisco FTD in the network and is determining which Firepower mode to use. The organization needs to have multiple virtual Firepower devices working separately inside of the FTD appliance to provide traffic segmentation Which deployment mode should be configured in the Cisco Firepower Management Console to support these requirements?
- A. single deployment
- B. multiple deployment
- C. single-context
- D. multi-instance
Answer: D
NEW QUESTION 85
An administrator is setting up Cisco Firepower to send data to the Cisco Stealthwatch appliances. The NetFlow_Set_Parameters object is already created, but NetFlow is not being sent to the flow collector. What must be done to prevent this from occurring?
- A. Create a Security Intelligence object to send the data to Cisco Stealthwatch
- B. Add the NetFlow_Add_Destination object to the configuration
- C. Create a service identifier to enable the NetFlow service
- D. Add the NetFlow_Send_Destination object to the configuration
Answer: B
NEW QUESTION 86
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?
- A. system generate-troubleshoot
- B. show running-config | include manager
- C. show managers
- D. show configuration session
Answer: C
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/ b_Command_Reference_for_Firepower_Threat_Defense/c_3.html
NEW QUESTION 87
Which Firepower feature allows users to configure bridges in routed mode and enables devices to perform Layer 2 switching between interfaces?
- A. FlexConfig
- B. BDI
- C. IRB
- D. SGT
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/ Firepower_System_Release_Notes_Version_620/new_features_and_functionality.html
NEW QUESTION 88
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service? (Choose two.)
- A. outbound port TCP/80
- B. inbound port TCP/80
- C. outbound port TCP/443
- D. outbound port TCP/8080
- E. inbound port TCP/443
Answer: A,C
NEW QUESTION 89
A network administrator is seeing an unknown verdict for a file detected by Cisco FTD. Which malware policy configuration option must be selected in order to further analyse the file in the Talos cloud?
- A. Malware analysis
- B. Sandbox analysis
- C. Spero analysis
- D. Dynamic analysis
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Reference_a_wrapper_Chapter_topic_here.html
NEW QUESTION 90
Which CLI command is used to generate firewall debug messages on a Cisco Firepower?
- A. system support platform
- B. system support dump-table
- C. system support ssl-debug
- D. system support firewall-engine-debug
Answer: D
NEW QUESTION 91
Which two deployment types support high availability? (Choose two.)
- A. virtual appliance in public cloud
- B. intra-chassis multi-instance
- C. transparent
- D. clustered
- E. routed
Answer: C,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION 92
A security engineer is configuring an Access Control Policy for multiple branch locations. These locations share a common rule set and utilize a network object called INSIDE_NET which contains the locally significant internal network subnets at each location. What technique will retain the policy consistency at each location but allow only the locally significant network subnet within the application rules?
- A. utilizing a dynamic ACP that updates from Cisco Talos
- B. creating a unique ACP per device
- C. utilizing policy inheritance
- D. creating an ACP with an INSIDE_NET network object and object overrides
Answer: D
Explanation:
Section: Configuration
NEW QUESTION 93
A company wants a solution to aggregate the capacity of two Cisco FTD devices to make the best use of resources such as bandwidth and connections per second. Which order of steps must be taken across the Cisco FTDs with Cisco FMC to meet this requirement?
- A. Add members to Cisco FMC, configure Cisco FTD interfaces in Cisco FMC. configure cluster members in Cisco FMC, create cluster in Cisco FMC. and configure cluster members in Cisco FMC.
- B. Add members to the Cisco FMC, configure Cisco FTD interfaces, create the cluster in Cisco FMC, and configure cluster members in Cisco FMC.
- C. Configure the Cisco FTD interfaces and cluster members, add members to Cisco FMC. and create the cluster in Cisco FMC.
- D. Configure the Cisco FTD interfaces, add members to FMC, configure cluster members in FMC, and create cluster in Cisco FMC.
Answer: C
NEW QUESTION 94
In which two ways do access control policies operate on a Cisco Firepower system? (Choose two.)
- A. File policies use an associated variable set to perform intrusion prevention.
- B. They can block traffic based on Security Intelligence data.
- C. Traffic inspection can be interrupted temporarily when configuration changes are deployed.
- D. The system performs intrusion inspection followed by file inspection.
- E. The system performs a preliminary inspection on trusted traffic to validate that it matches the trusted parameters.
Answer: B,C
NEW QUESTION 95
......
Cisco Exam Practice Test To Gain Brilliante Result: https://www.exams4collection.com/300-710-latest-braindumps.html
Tested Material Used To 300-710: https://drive.google.com/open?id=1j4up5_C4oGeskquNaMspqjhoNafn1j5j
