Jul-2023 Pass Your EX200 Exam at the First Try with 100% Real Exam
Get Real Exam Questions for EX200 with New Questions
RedHat EX200 (Red Hat Certified System Administrator - RHCSA) exam is a certification program designed to test the knowledge and skills of system administrators who are responsible for managing Linux systems. Red Hat Certified System Administrator - RHCSA certification is globally recognized and is highly sought after by individuals and organizations alike. EX200 exam is designed to evaluate the candidate's ability to perform various tasks related to installation, configuration, and management of Red Hat Enterprise Linux systems.
Best Solution to prepare the Red Hat EX200 Exam
Know the detailed concepts for the Red Hat Certified Engineer Professional certification exam. You can use both PDF files and exam dumps to study for the Red Hat Certified Engineer Professional certification exam. It is a very simple way to prepare well for the Red Hat Certified Engineer Professional certification exam. Pay as much as you can afford. Purchase Red Hat Certified Engineer Professional certification exam dumps from the website of Exams4Collection. Prep for Preparing for the Red Hat Certified Engineer Professional certification exam is very easy if you can afford to pay more. You can choose this way to prepare well for the Red Hat Certified Engineer Professional certification exam. Pass the test easily. The service offered by Exams4Collection is very useful for passing an exam. The product is of great quality. You can easily pass the Red Hat Certified Engineer Professional certification exam if you are provided with a product that is of high quality.
The account is also available on the Exams4Collection website. You can choose this way to prepare well for the Red Hat Certified Engineer Professional certification exam easier. You will not be disappointed with certification questions service and product quality. Pay as much as you can afford. Requirements for the Red Hat Certified Engineer Professional certification exam. It is very important that you make sure that your system is compatible with the requirements for the Red Hat Certified Engineer Professional certification exam. Life time membership is available on Exams4Collection website. You can choose this way to prepare well for the Red Hat Certified Engineer Professional certification exam easier. The intimation is available on your email when the Red Hat Certified Engineer Professional certification exam is available. Location of the Red Hat Certified Engineer Professional certification exam is also available on the website of Exams4Collection. Step by step guidance is available on the website of Exams4Collection. You can choose this way to prepare well for the Red Hat Certified Engineer Professional certification exam easier with Red Hat EX200 Dumps. Updates are also available on the Exams4Collection website. It is very important that you are aware of the latest updates for the Red Hat Certified Engineer Professional certification exam. The simulator is available on Exams4Collection website. It is very important that you complete the simulator for the Red Hat Certified Engineer Professional certification exam.
NEW QUESTION # 57
Find all lines in the file /usr/share/dict/words that contain the string seismic. Put a copy of all these lines in their original order in the file /root/wordlist. /root/wordlist should contain no empty lines and all lines must be exact copies of the original lines in /usr/share/dict/words.
Answer:
Explanation:
see explanation below.
Explanation
grep seismic /usr/share/dict/words> /root/wordlist
NEW QUESTION # 58
Part 2 (on Node2 Server)
Task 4 [Managing Logical Volumes]
Resize the logical volume, lvrz and reduce filesystem to 4600 MiB. Make sure the the filesystem contents remain intact with mount point /datarz (Note: partitions are seldom exactly the size requested, so anything within the range of 4200MiB to 4900MiB is acceptable)
Answer:
Explanation:
* [root@node2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
vdb 252:16 0 5G 0 disk
└─vdb1 252:17 0 4.2G 0 part
└─vgrz-lvrz 253:2 0 4.1G 0 lvm /datarz
vdc 252:32 0 5G 0 disk
└─vdc1 252:33 0 4.4G 0 part
└─datavg-datalv 253:3 0 3.9G 0 lvm /data
vdd 252:48 0 5G 0 disk
vde 252:64 0 10G 0 disk
[root@node2 ~]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvrz vgrz -wi-ao---- 4.10g
[root@node2 ~]# vgs
VG #PV #LV #SN Attr VSize VFree
vgrz 1 1 0 wz--n- <4.15g 48.00m
[root@node2 ~]# parted /dev/vdb print
Number Start End Size Type File system Flags
1 1049kB 4456MB 4455MB primary lvm
* [root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.0G 17M 3.8G 1% /datarz
[root@node2 ~]# parted /dev/vdb mkpart primary 4456MiB 5100MiB
[root@node2 ~]# parted /dev/vdb set 2 lvm on
[root@node2 ~]# udevadm settle
[root@node2 ~]# pvcreate /dev/vdb2
Physical volume "/dev/vdb2" successfully created.
* [root@node2 ~]# vgextend vgrz /dev/vdb2
Volume group "vgrz" successfully extended
[root@node2 ~]# lvextend -r -L 4600M /dev/vgrz/lvrz
Size of logical volume vgrz/lvrz changed from 4.10 GiB (1050 extents) to 4.49 GiB (1150 extents).
Logical volume vgrz/lvrz successfully resized.
[root@node2 ~]# resize2fs /dev/vgrz/lvrz
[root@node2 ~]# df -hT
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vgrz-lvrz ext4 4.4G 17M 4.2G 1% /datarz
NEW QUESTION # 59
Create a new logical volume according to the following requirements:
The logical volume is named database and belongs to the datastore volume group and has a size of 50 extents.
Logical volumes in the datastore volume group should have an extent size of 16 MB.
Format the new logical volume with a ext3 filesystem.
The logical volume should be automatically mounted under /mnt/database at system boot time.
Answer:
Explanation:
see explanation below.
Explanation
fdisk -cu /dev/vda
partx -a /dev/vda
pvcreate /dev/vdax
vgcreate datastore /dev/vdax -s 16M
lvcreate-l 50 -n database datastore
mkfs.ext3 /dev/datastore/database
mkdir /mnt/database
mount /dev/datastore/database /mnt/database/ df -Th
vi /etc/fstab
/dev/datastore /database /mnt/database/ ext3 defaults 0 0 mount -a
NEW QUESTION # 60
The system ldap.example.com provides an LDAP authentication service.
Your system should bind to this service as follows:
The base DN for the authentication service is dc=domain11, dc=example, dc=com LDAP is used to provide both account information and authentication information. The connection should be encrypted using the certificate at http://host.domain11.example.com/pub/domain11.crt When properly configured, ldapuserX should be able to log into your system, but will not have a home directory until you have completed the autofs requirement. Username: ldapuser11 Password: password
Answer:
Explanation:
system-config-authentication LDAP user DN=dc=domain11,dc=example,dc=com Server= host.domain11.example.com Certificate= http://host.domain11.example.com/pub/domain11.crt (enter url carefully, there maybe // or ..) LDAP password OK starting sssd su -ldapuser11 Display Bash prompt #exit
NEW QUESTION # 61
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP Forwarding.
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf net.ipv4.ip_forward=1
Answer:
Explanation:
see explanation below.
Explanation
/proc is the virtual filesystem, containing the information about the running kernel.
To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the value from /etc/sysctl.conf.
NEW QUESTION # 62
There are two different networks 192.168.0.0/24 and 192.168.1.0/24. Where 192.168.0.254 and
192.168.1.254 IP Address are assigned on Server. Verify your network settings by pinging 192.168.1.0/24 Network's Host.
Answer:
Explanation:
see explanation below.
Explanation
* vi /etc/sysconfing/network NETWORKING=yes HOSTNAME=station?.example.com GATEWAY=192.168.0.254 service network restart
2.vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=X.X.X.X
NETMASK=X.X.X.X
GATEWAY=192.168.0.254
ifdown eth0
ifup eth0
NEW QUESTION # 63
Upgrading the kernel as 2.6.36.7.1, and configure the system to Start the default kernel, keep the old kernel available.
Answer:
Explanation:
# cat /etc/grub.conf
# cd /boot
# lftp it
# get dr/dom/kernel-xxxx.rpm
# rpm -ivh kernel-xxxx.rpm
# vim /etc/grub.conf
default=0
NEW QUESTION # 64
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1
Answer:
Explanation:
see explanation below.
Explanation
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40 GATEWAY=172.24.40.1 DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim
/etc/sysconfig/network
(Configure Host Name)
NEW QUESTION # 65
Create a 512M partition, make it as ext4 file system, mounted automatically under /mnt/data and which take effect automatically at boot-start.
Answer:
Explanation:
see explanation below.
Explanation
# fdisk /dev/vda
n
+512M
w
# partprobe /dev/vda
# mkfs -t ext4 /dev/vda5
# mkdir -p /data
# vim /etc/fstab
/dev/vda5 /data ext4 defaults 0 0
# mount -a
NEW QUESTION # 66
One Logical Volume named /dev/test0/testvolume1 is created. The initial Size of that disk is 100MB now you required more 200MB. Increase the size of Logical Volume, size should be increase on online.
Answer:
Explanation:
lvextend -L+200M /dev/test0/testvolume1 Use lvdisplay /dev/test0/testvolume1) ext2online -d /dev/test0/testvolume1 lvextend command is used the increase the size of Logical Volume. Other command lvresize command also here to resize. And to bring increased size on online we use the ext2online command.
NEW QUESTION # 67
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1
Answer:
Explanation:
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40 GATEWAY=172.24.40.1 DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim /etc/sysconfig/network (Configure Host Name)
NEW QUESTION # 68
There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24 Network. One RHEL6 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server. How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
Explanation:
vi /etc/sysconfig/network GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0 DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
service network restart
Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254.
NEW QUESTION # 69
Create a 512M partition, make it as ext4 file system, mounted automatically under /mnt/data and which take effect automatically at boot-start.
Answer:
Explanation:
# fdisk /dev/vda
n
+512M
w
# partprobe /dev/vda
# mkfs -t ext4 /dev/vda5
# mkdir -p /data
# vim /etc/fstab
/dev/vda5 /data ext4 defaults 0 0
# mount -a
NEW QUESTION # 70
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP Forwarding.
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf net.ipv4.ip_forward=1
Answer:
Explanation:
/proc is the virtual filesystem, containing the information about the running kernel.
To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the value from /etc/sysctl.conf.
NEW QUESTION # 71
Configure the NTP service in your system.
Answer:
Explanation:
system-config-date &
NEW QUESTION # 72
Add 3 users: harry, natasha, tom.
The requirements: The Additional group of the two users: harry, Natasha is the admin group. The user: tom's login shell should be non-interactive.
Answer:
Explanation:
see explanation below.
Explanation
# useradd -G admin harry
# useradd -G admin natasha
# useradd -s /sbin/nologin tom
# id harry;id Natasha (Show additional group)
# cat /etc/passwd
(Show the login shell)
OR
# system-config-users
NEW QUESTION # 73
Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you to configure yum direct to the already existing file server.)
Answer:
Explanation:
# cd /etc/yum.repos.d
# vim local.repo
[local]
name=local.repo
baseurl=file:///mnt
enabled=1
gpgcheck=0
# yum makecache
# yum install -y vsftpd
# service vsftpd restart
# chkconfig vsftpd on
# chkconfig --list vsftpd
# vim /etc/vsftpd/vsftpd.conf
anonymous_enable=YES
NEW QUESTION # 74
One Domain RHCE is configured in your lab, your domain server is server1.example.com. nisuser2001, nisuser2002, nisuser2003 user are created on your server 192.168.0.254:/rhome/stationx/nisuser2001. Make sure that when NIS user login in your system automatically mount the home directory. Home directory is separately shared on server /rhome/stationx/ where x is your Station number.
Answer:
Explanation:
see explanation below.
Explanation
* use the authconfig --nisserver=<NIS SERVER> --nisdomain=<NIS DOMAIN> -- update Example: authconfig --niserver=192.168.0.254 --nisdomain=RHCE --update or system-config-authentication
* Click on Enable NIS
* Type the NIS Domain: RHCE
* Type Server 192.168.0.254 then click on next and ok
* You will get a ok message.
* Create a Directory /rhome/stationx where x is your station number.
* vi /etc/auto.master and write at the end of file /rhome/stationx /etc/auto.home --timeout=60
* vi /etc/auto.home and write
* -rw,soft,intr 192.168.0.254:/rhome/stationx/&
Note: please specify your station number in the place of x.
* Service autofs restart
* Login as the nisuser2001 or nisuser2002 on another terminal will be Success. According to question, RHCE domain is already configured. We have to make a client of RHCE domain and automatically mount the home directory on your system. To make a member of domain, we use the authconfig with option or system-config authentication command. There a are lots of authentication server i.e NIS, LDAB, SMB etc. NIS is a RPC related Services, no need to configure the DNS, we should specify the NIS server address.
Here Automount feature is available. When user tried to login, home directory will automatically mount. The automount service used the /etc/auto.master file. On
/etc/auto.master file we specified the mount point the configuration file for mount point.
NEW QUESTION # 75
Create a user named alex, and the user id should be 1234, and the password should be alex111.
Answer:
Explanation:
see explanation below.
Explanation
# useradd -u 1234 alex
# passwd alex
alex111
alex111
OR
echo alex111|passwd -stdin alex
NEW QUESTION # 76
SIMULATION
Configure your Host Name, IP Address, Gateway and DNS.
Host name: dtop5.dn.ws.com
IP Address: 172.28.10.5/4
Gateway: 172.28.10.1
DNS: 172.28.10.1
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
1. Configure Host Name
vim /etc/sysconfig/network NETWORKING=yes HOSTNAME=dtop5.dn.ws.com GATEWAY=172.28.10.1
2. Configure IP Address, Gateway and DNS
Configure the network by Network Manager:
Note: Please remember to choose two options:
Connect automatically
Available to all users
Click "Apply", save and exit, and restart your network services:
# Service network restart
3. Validate these profiles:
a) Check gateway: # vim / etc / sysconfig / network
NETWORKING=yes
HOSTNAME=dtop5.dn.ws.com
GATEWAY=172.28.10.1
b) Check Host Name: # vim /etc/hosts
c) Check DNS: # vim /etc/resolv.conf
# Generated by NetworkManager
Search dn.ws.com
Nameserver 172.28.10.1
d) Check Gateway: # vim /etc/sysconfig/network-scripts/ifcfg-eth0
NEW QUESTION # 77
Notes:
NFS: NFS instructor.example.com:/var/ftp/pub/rhel6/dvd
YUM: http://instructor.example.com/pub/rhel6/dvd
ldap: http://instructor.example.com/pub/EXAMPLE-CA-CERT
- A. Install dialog package.
Answer: A
NEW QUESTION # 78
Your System is going to use as a Router for two networks. One Network is 192.168.0.0/24 and Another Network is 192.168.1.0/24. Both network's IP address has assigned. How will you forward the packets from one network to another network?
Answer:
Explanation:
see explanation below.
Explanation
* echo "1" >/proc/sys/net/ipv4/ip_forward
* vi /etc/sysctl.conf
net.ipv4.ip_forward = 1
If you want to use the Linux System as a Router to make communication between different networks, you need enable the IP forwarding. To enable on running session just set value 1 to
/proc/sys/net/ipv4/ip_forward. As well as automatically turn on the IP forwarding features on next boot set on
/etc/sysctl.conf file.
NEW QUESTION # 79
SIMULATION
User mary must configure a task.
Requirement: The local time at 14:23 every day echo "Hello World.".
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: crontab -u mary -e
23 14 * * * echo "Hello World."
NEW QUESTION # 80
Configure autofs to make sure after login successfully, it has the home directory autofs, which is shared as /rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users can use the home directory normally.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# chkconfig autofs on
# cd /etc/
# vim /etc/auto.master
/rhome /etc/auto.ldap
# cp auto.misc auto.ldap
# vim auto.ladp
ldapuser40 -rw,soft,intr 172.24.40.10:/rhome/ldapuser40
* -rw,soft,intr 172.16.40.10:/rhome/&
# service autofs stop
# server autofs start
# showmount -e 172.24.40.10
# su - ladpuser40
NEW QUESTION # 81
......
The Red Hat EX200 certification exam is ideal for individuals who want to enhance their skills and knowledge in Linux system administration. Red Hat Certified System Administrator - RHCSA certification validates an individual's understanding of the Linux operating system and their ability to manage and configure Red Hat Enterprise Linux systems. Red Hat Certified System Administrator - RHCSA certification is recognized globally, and individuals who hold the certification are highly sought after in the IT industry.
Updated EX200 Certification Exam Sample Questions: https://www.exams4collection.com/EX200-latest-braindumps.html
Get Unlimited Access to EX200 Certification Exam Cert Guide: https://drive.google.com/open?id=1L85PBTk7UacbinX20uXr_L8EQlOlScAa
