Latest 2021 Realistic Verified OmniStudio-Developer Dumps - 100% Free OmniStudio-Developer Exam Dumps
Get 2021 Updated Free Salesforce OmniStudio-Developer Exam Questions & Answer
Salesforce OmniStudio-Developer Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 33
What should a developer's first step be when troubleshooting whether a DataRaptor Extract is retrieving data?
- A. Go to the Lightning Console and reload the page to test.
- B. Go to the PREVIEW tab In OmniScript to test.
- C. Deactivate the card and layout, and go to the PREVIEW tab for the card to test.
- D. Add a key/value pair in the DataRaptor to test it.
Answer: D
NEW QUESTION 34
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. Use Data JSON is not selected in the properties of the Type Ahead Block.
- B. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- C. The Typeghead ley is not in the correct format
- D. Lookup Mode is not selected in the properties of the Type A Head Block.
Answer: B
NEW QUESTION 35
What is the merge code you need for this Integration Procedure structure to pass a CaseNumber node from the DataRaptor Extract Action Single Book (DRReadCase) to the HTTP Action's HTTP Path URL?
- A. {{CaseNumben}
- B. %DRReadCase:CaseNumber%
- C. {{DRReadCase. CaseNumber}}
- D. HTTPGetCaseDetails: CaseNumber
Answer: B
NEW QUESTION 36
In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?
- A. It must be a calculation step.
- B. It must be included in constants.
- C. It must be a matrix lookup step.
- D. It must be included m the calculation output.
Answer: D
NEW QUESTION 37
What parent JSON node name must be sent to a Calculation Procedure?
- A. input
- B. Inputs
- C. Input
- D. inputs
Answer: D
NEW QUESTION 38
When an OmniScript is launched from an Action on a FlexCard, the OmniScript displays, but no Salesforce data is populated.
What error could cause this behavior? Choose 2 answers
- A. There is no active version of the OmniScript.
- B. The Id Field for Actions in the FlexCard is not configured with the correct Recordid.
- C. In the DataRaptor Extract Action, the Input Parameters Data Source is misspelled.
- D. There is no active version of the DataRaptor Extract.
Answer: B,C
NEW QUESTION 39
You are troubleshooting an Integration Procedure with two elements: a Remote Action named FetchCart and a Response Action named ResponseCart. In PREVIEW, what JSON node shows the data sent to the Remote Action?
- A. ResponseCartDebug
- B. FetchCartDebug
- C. ResponseCart
- D. FetchCart
Answer: B
NEW QUESTION 40
A healthcare company wants to enable its subscribers to add, edit, or delete dependents related to their policy Community portal. The developer on the project decides to use an MniScript.
How should the developer configure the OmniScript to provide this functionality?
- A. Use a Text Block element and a Remote Action element.
- B. Use an Input Block element and a DataRaptor Post Action element.
- C. Use an Edit Block element configured with SOQL statements.
- D. Use an Edit Block element configured with Remote Actions.
Answer: D
NEW QUESTION 41
While using the Lightning App Builder, you add a Custom Component to the console, but the component you want to add does not appearin the dropdown list.
What could cause this?
- A. The FlexCard does not have an active version.
- B. The FlexCard has a recordid that is for the wrong record type.
- C. The record displayed in the Lightning App Builder preview has no data for the record displayed.
- D. The data source for the FlexCard is not active.
Answer: A
NEW QUESTION 42
Refer to theexhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION 43
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community's theme.
What must be developer do to configure the FlexCard for deployment in a Community?
- A. Set the Developer property in Card Configuration to ''Community''
- B. Set the Target property in publish Options to Communitypage''
- C. Configure the Component visibility in the custom Component.
- D. Add the FlexCard's API name to FlexCard Player component
Answer: B
NEW QUESTION 44
...... configure Additional input to send exactly the same data? Assume that thedevelop checked Send Only Additional input.
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
NEW QUESTION 45
Of the questions listed below, which two are ones you need to answer when you create a DataRaptor Extract?
- A. What should | name the JSON node where the data will be sent?
- B. Which card will be using this DataRaptor? D Which OmniScript template will | be using?
- C. Which sObject or sObjects contain the data | need?
Answer: B,C
NEW QUESTION 46
Refer to the exhibit below.
What isthe reason that the fields fail to display the fetched data?
- A. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- B. The typeHead key is not in the correct format.
- C. Lookup Mode is selected in the properties of the Type Ahead Block.
- D. Use Data JSON is Not selected in the properties of the Type Ahead Block.
Answer: A
NEW QUESTION 47
Refer to the following row-versioned calculation matrix.
The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?
- A. The row is deleted in all versions
- B. The row is delete only in Version 3.
- C. The row is deleted in Version 3 and Version 1.
- D. The row is deleted In Versions 2 and 3 but will remain in Version 1.
Answer: B
NEW QUESTION 48
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript,the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. Use Data JSON is not selected in the properties of the Type Ahead Block.
- B. TheTypeghead ley is not in the correct format
- C. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- D. Lookup Mode is not selected in the properties of the Type A Head Block.
Answer: C
NEW QUESTION 49
Why would a developer clone an Integration Procedure instead of versioning it?
- A. The new Integration Procedure is Chainable.
- B. The new Integration Procedure it replacing stub data.
- C. The new Integration Procedure uses a Cache Block.
- D. The new Integration Procedure will be used independently
Answer: D
NEW QUESTION 50
......
OmniStudio-Developer Dumps PDF and Test Engine Exam Questions: https://www.exams4collection.com/OmniStudio-Developer-latest-braindumps.html
Get New OmniStudio-Developer Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1wPEqmQBHcvyqqSCeM5ZOdHJFhuri3WEs
