NCA-5.15 Questions Prepare with Learning Information! 2022 Regularly updated
Get NCA-5.15 Products Practice Material for NCA-5.15 Exam Question Preparation
What are the Passing Score, Duration & Questions for the Nutanix NCA-5.15 Exam
- Languages: English, Japanese, and simplified Chines.
- The passing score: 50%
- Number of Questions: 50 questions
- Time Duration: 90 minutes
What are the steps to follow for the registration of Nutanix NCA-5.15 Exam Certification
- Click on the link to the page where you can register.
- Pay the registration fee of $99.
- Fill in all the required information.
- Go to the official website of Nutanix NCA-5.15 Exam Certification.
NEW QUESTION 17
An organization runs several core business applications on a Nutanix cluster. System stability and support are critical for these applications, which has an annual maintenance window.
How can the administrator assure that these requirements are met?
- A. Purchase Ultimate licensing.
- B. Adhere to the LTS release cycle.
- C. Adhere to the STS release cycle.
- D. Purchase Mission Critical support.
Answer: A
NEW QUESTION 18
Which two Protection Domain features require a configured schedule of less than 15 minutes? (Choose two.)
- A. Asynchronous DR
- B. NearSyncRD
- C. Synchronous DR
- D. Metro Availability DR
Answer: B,D
NEW QUESTION 19
An administrator should use which Nutanix component to to create in-guest clustering?
- A. Containers
- B. Blocks
- C. Storage Pools
- D. Volumes
Answer: D
NEW QUESTION 20
An administrator wants to evaluate the overall health of the Nutanix cluster. What should be the first step?
- A. Run Xi Beam
- B. Run NCC
- C. Run Log Collector
- D. Run LCM
Answer: B
NEW QUESTION 21
An application owner had reported that an AHV-based critical application VM is performing very slowly.
After initial diagnostics, it has been observed that the CPU utilization is significantly higher than normal.
What two actions should the administrator take on this VM without shutting it down? (Choose two.)
- A. Increase number of vCPU in Prism Element
- B. Use PrismElement to increase the number of cores
- C. Ensure CPU hot-add is supported by the Guest O
- D. Configure additional cores in acli
Answer: A,C
NEW QUESTION 22
How can an administrator access a Windows VM running on a Nutanix cluster if it is unreachable via ping?
- A. Open a Virtual Console through Prism Element
- B. Connect using RDP
- C. Open a Virtual Console through Prism Central
- D. Connect using Xi Frame
Answer: A
NEW QUESTION 23
What should an administrator do after a Protection Domain is migrated?
- A. Register Virtual Machines
- B. Mount datastores on Hosts
- C. Restore Virtual Machines
- D. Power on Virtual Machines
Answer: D
NEW QUESTION 24
An administrator has moved several workloads from a legacy vSphere virtual infrastructure to a modern Nutanix AHV cluster. After performing this action the administrator realizes they are missing vCenter inventories that would be used to classify the VMs by specific prefixes.
What is the fastest way in Prism Central to group VMs with the specified criteria?
- A. Categories
- B. Projects
- C. Analysis
- D. Fitters
Answer: A
NEW QUESTION 25
An administrator expanded the disk capacity on a Windows VM, but the VM operator saw no difference in free space. Which additional step must the administrator take?
- A. Reconnects to iSCSi target
- B. Expand the current partition
- C. Convert to a dynamic disk
- D. Reboot the Virtual Machine
Answer: B
NEW QUESTION 26
Refer to the exhibit.
Management has tasked an administrator to restore the VM, VMforQuestion to a previous point in time (3:20pm), to recover from a corrupted set of files.
Which snapshot should the administrator choose, and which action(s) should be executed?
- A. Snapshot 2 Restore
- B. Snapshot 2 Details review restore points. then Clone
- C. Snapshot 1 Details, review restore points. then Clone
- D. Snapshot 1, Restore
Answer: C
NEW QUESTION 27
Which Nutanix cluster component is responsible for the cluster configuration?
- A. Cassandra
- B. Zeus
- C. Stargate
- D. Zookeeper
Answer: D
NEW QUESTION 28
What is required to schedule VM snapshots?
- A. Protection Domain
- B. Categories
- C. Volume Group
- D. Consistency Group
Answer: A
NEW QUESTION 29
A new Project is being rolled out to an AHV cluster being monitored by Prism Central. The applications team indicates that the application managed by the project is very memory intensive. The administrator wants to be notified about any memory constraints, should they occur.
How would an administrator most effectively achieve this task?
- A. Search for the VM, then in the Details page go to metrics and select CPU Usage.
- B. Create a Report to tracking the Memory Usage.
- C. Create a new Metric chart for the duster, and analyze Hypervisor Memory Usage.
- D. Create a new Alert Policy for Memory Usage and set to Critical after 80%.
Answer: D
NEW QUESTION 30
Which statement best defines Replication Factor 2 (RF2)?
- A. Data will be written locally, and a second copy goes to a remote site
- B. Data will be written locally, and a second copy goes to another node in the same cluster
- C. Data will be written locally, and a second copy then will be replicated to another cluster
- D. Data will be written locally, and a second copy to another disk group
Answer: B
NEW QUESTION 31
An administrator needs to replace a node in a three-node cluster. The health status for the environment is good and the cluster is able to support a single node failure.
Which step must be performed first?
- A. Verify hypervisor versions
- B. Remove the failed node from the cluster
- C. Expand the cluster with the new node
- D. Plug in all network cables
Answer: C
NEW QUESTION 32
An administrator has been asked to investigate performance issues for a business critical application. The application runs on a single VM. What is easiest way for the administrator to begin troubleshooting this issue?
- A. Review the VM Performance tab for the VM in Prism Element
- B. Review the metrics charts on the Prism Element Home page
- C. On the Health page, look for Critical or Warning alerts for the VM.
- D. On the Analysis page, create an entity chart with all metrics included
Answer: D
NEW QUESTION 33
Refer to the exhibit.
An administrator has created a new Windows VM and given it to the user. The user states that only the C drive mapping is visible within the Windows OS.
What is causing this issue?
- A. The additional disks were formatted as NTFS in Prism Central.
- B. The administrator has not run the dd command line community utility.
- C. The user has not formatted and assigned drive letters to the additional disks.
- D. The additional disks have not been formatted as ExFAT in Prism Central.
Answer: C
NEW QUESTION 34
An administrator with an AHV cluster notices that time/date stamps in logs for some VMs are not correct.
After investigating, the administrator finds that many of their user VMs are set to UTC What two methods can be used to resolve the issue? (Choose two.)
- A. Configure NTP inside each guest VM.
- B. Configure NTP within Prism.
- C. Configure the time zone for each VM using Prism.
- D. Configure the VMs time zone inside each guest VM.
Answer: B,C
NEW QUESTION 35
An administrator needs to group VMs by using a custom attribute. At the same time, this tag must not be used to configure other Nutanix services, such as Data Protection.
Which action in Prism Central should the administrator take?
- A. Create a new Catalog Item
- B. Select VMs and create a new Label
- C. Create a new Playbook
- D. Create a user defined category
Answer: D
NEW QUESTION 36
Refer to the exhibit.
What is indicated by the yellow area of the chart?
- A. Abnormal utilization
- B. Normal utilization
- C. Warning alerts
- D. Critical alerts
Answer: C
NEW QUESTION 37
An administrator completed a successful AOS upgrade, but saw the following alert the following day:
Detected incompatible AHV version What is most likely causing this alert?
- A. The upgraded AOS version is incompatible with AHV.
- B. AHV is not at the version that carte with the upgraded AOS.
- C. AHV was upgraded manually prior to AOS upgrade.
- D. NCC version is not compatible with the current AHV version.
Answer: B
NEW QUESTION 38
An administrator has received the following critical alert:
Node 192.168.148.172 is marked to be detached from metadata The administrator has opened a case with Nutanix and the support engineer has requested more information about the error. Which two actions should the administrator take in the Health Check dashboard to collect the requested information? (Choose two.)
- A. Create an Entity chart
- B. Run the Nutanix Cluster Check
- C. Open a remote support tunnel.
- D. Run the Log Collector
Answer: B,D
NEW QUESTION 39
An administrator has been asked to add 200 virtual machines to their existing Nutanix cluster. Which Nutanix product will help them plan for this addition capacity?
- A. Calm
- B. Era
- C. Beam
- D. Prism Pro
Answer: D
NEW QUESTION 40
Which option allows administrators to specify groups of VMs and assign them to a destination for Disaster Recovery using Leap?
- A. Availability Zones
- B. Protection Policies
- C. Recovery Plans
- D. Security Policies
Answer: A
NEW QUESTION 41
Which two Nutanix features offer the ability to restore a VM? (Choose two.)
- A. Nutanix Leap
- B. Nutanix Flow
- C. Data Protection
- D. Site Recovery Manager
Answer: A,C
NEW QUESTION 42
......
Certification Topics of Nutanix NCA-5.15 Exam
- Operate Nutanix hybrid cloud solutions
- Manage Nutanix hybrid cloud solutions
- Describe Nutanix Solutions
Most Reliable Nutanix NCA-5.15 Training Materials: https://www.exams4collection.com/NCA-5.15-latest-braindumps.html
