New 2022 Guaranteed Success with Exams4Collection 300-430 Dumps Cisco PDF Questions
Exceptional Practice To Implementing Cisco Enterprise Wireless Networks Pass the First Time
What Are the Career Opportunities Available?
After all the effort you put to pass the exam and get your certification, you deserve to be rewarded with a higher salary. The Cisco Certified Specialist – Enterprise Wireless Implementation certificate opens many opportunities, making you compatible for the roles like:
- Network designer
- Wireless network engineer
- Sales engineer
If you apply for the position of network designer, then you should know that according to Payscale.com, you can win around $80k on average per year. You can get a similar salary if you decide to work as a Wireless Network engineer which is approximately $81k. Still, in case one obtains the CCNP Enterprise certification, job opportunities expand, and even the average salary raises to $86k per annum.
Difficulty in Writing Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
The Implementation of the Cisco wireless networks (300-430) certification is one of the most important certifications that applicants can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that make it impossible for them to believe, which would be beneficial for them to choose the correct 300-430 practice test.
However, applicants can clear the examination with the correct concentration and the correct preparatory material. Exams4Collection have the most up to date 300-430 exam dumps that allows a clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track qualification questions for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.
Monitoring
This domain makes up about 15% of the whole content and evaluates the individuals’ understanding of the following processes:
- Managing RF interferers;
- Troubleshooting the client’s connectivity.
- Managing rogues and alarms;
- Utilizing reports on Cisco DNA Center and PI;
NEW QUESTION 26
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Set QoS to Platinum
- B. Allow WMM
- C. Trust DSCP
- D. Enable CAC
Answer: C
Explanation:
NEW QUESTION 27
Which two restrictions are in place with regards to configuring mDNS? (Choose two.)
- A. mDNS is not supported on FlexConnect APs with a locally switched WLAN.
- B. Controller software must be newer than 7.0.6+.
- C. mDNS is not supported over IPv6.
- D. mDNS cannot use UDP port 5353 as the destination port.
- E. mDNS uses only UDP port 5436 as a destination port.
Answer: A,C
Explanation:
NEW QUESTION 28
A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the Trusted Root Certification Authorities store on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?
- A. There is an invalid 802.1X authentication policy on the authenticator.
- B. There is an IEEE invalid 802.1X authentication policy on the authentication server.
- C. The laptop has not received a valid IP address from the wireless controller.
- D. The user Active Directory account is locked out after several failed attempts.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Security/TrustSec_199/Dot1X_Deployment/Dot1x_D
NEW QUESTION 29
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP
- B. WPA+WPA2
- C. 802.1X
- D. Static WEP + 802.1X
- E. CKIP
Answer: A,B
Explanation:
Explanation
"When setting the security setting in the WLAN, there are specific elements that are not supported on the 600 series. For Layer 2 Security, only these options are supported for the Cisco Aironet 600 Series OEAP: None WPA+WPA2 Static WEP can also be used but not for .11n data rates."
https://www.cisco.com/c/en/us/support/docs/wireless/aironet-600-series-officeextend-access-point/113003-office
NEW QUESTION 30
A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?
- A. Interference Devices reports on Cisco Wireless LAN Controller
- B. Performance reports on Cisco Prime Infrastructure
- C. CleanAir reports on Cisco Prime Infrastructure
- D. Air Quality reports on Cisco Wireless LAN Controller
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Apr2014/CVD-CampusCleanAirDesignGuide-APR1
NEW QUESTION 31
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. detect and locate.
- B. analytics
- C. presence
- D. connect and engage
Answer: A
Explanation:
NEW QUESTION 32
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature corrects the issue?
- A. broadcast forwarding
- B. unicast AP multicast mode
- C. controller IGMP snooping
- D. multicast AP multicast mode
Answer: D
NEW QUESTION 33
Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users can associate to the wireless while the WAN is down. Which three elements (Cisco FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.)
- A. authentication-central/switch-central
- B. authentication-local/switch-local
- C. WEB authentication
- D. WPA2 personal
- E. standalone mode
- F. lightweight mode
Answer: B,D,E
NEW QUESTION 34
What is an important consideration when implementing a dual SSID design for BYOD?
- A. One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.
- B. SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.
- C. If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.
- D. After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.
Answer: A
Explanation:
NEW QUESTION 35
A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?
- A. Interference Devices reports on Cisco Wireless LAN Controller
- B. Performance reports on Cisco Prime Infrastructure
- C. CleanAir reports on Cisco Prime Infrastructure
- D. Air Quality reports on Cisco Wireless LAN Controller
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Apr2014/CVD-CampusCleanAirDesignGuide-APR1
NEW QUESTION 36
An engineer is following the proper upgrade path to upgrade a Cisco AireOS WLC from version 7.3 to 8.9.
Which two ACLs for Cisco CWA must be configured when upgrading from the specified codes? (Choose two.)
- A. Permit 0.0.0.0 0.0.0.0 UDP any DNS
- B. Permit 0.0.0.0 0.0.0.0 any DNS any
- C. Permit any any any
- D. Permit 0.0.0.0 0.0.0.0 UDP any any
- E. Permit 0.0.0.0 0.0.0.0 UDP DNS any
Answer: A,D
NEW QUESTION 37
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect BranchA-FCG vlan add 30
- B. config flexconnect group BranchA-FCG vlan 30 add
- C. config flexconnect BranchA-FCG vlan 30 add
- D. config flexconnect group BranchA-FCG vlan add 30
Answer: D
Explanation:
NEW QUESTION 38
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. HTTP user agent
- B. OS version
- C. MAC OUI
- D. DHCP
- E. IP address
- F. hostname
Answer: A,C,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION 39
The security learn is concerned about the access to all network devices, including the Cisco WLC. To permit only the admin subnet to have access to management, a CPU ACL is created and applied. However, guest users cannot get to the web portal. What must be configured to permit only admins to have access?
- A. The guest portal must be configured on the CPU ACLs on the Cisco WLC.
- B. Access to Cisco ISE must be allowed on the pre authentication ACL.
- C. Management traffic from the guest network must be configured on the ACL rules.
- D. Traffic toward the virtual interface must be permitted.
Answer: B
Explanation:
NEW QUESTION 40
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
- A. Cisco Hyperlocation Module
- B. Wireless Intrusion Prevention System
- C. Cisco Connected Mobile Experiences
- D. Cisco Mobility Services Engine
Answer: C
Explanation:
NEW QUESTION 41
A shopping center uses AireOS controllers with Cisco Wave 2 APs. A separate WLAN named Guest-012345678-WLAN is used for guest wireless clients. Management need's location analytics to determine popular areas. CMX must track only associated clients. What must be selected on the CMX server settings?
- A. Exclude probing clients
- B. Duty Cycle Cutoff
- C. Enable Location MAC Filtering
- D. Enable Locally Administered MAC Filtering
Answer: A
Explanation:
NEW QUESTION 42
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
- A. 30 seconds
- B. 15 seconds
- C. 10 seconds
- D. 60 seconds
Answer: B
Explanation:
NEW QUESTION 43
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
Explanation:
Explanation
Note: To enable Local switching, you have to disable central switching
NEW QUESTION 44
A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers. Which address provides automatic discovery of the best RP for each multicast group?
- A. 224.0.0.13
- B. 224.0.1.40
- C. 224.0.0.14
- D. 224.0.1.39
Answer: B
Explanation:
NEW QUESTION 45
A downstream packet that contains a DSCP value arrives at the WLC Ethernet interface from the wired source network. The WLC is configured for QoS WLAN 802.1p mapping. How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the respective AP and final wireless client destination?
- A. The outer CAPWAP DHCP is marked and capped without any inner DSCP value.
- B. No outer CAPWAP QoS tag is applied, but the original DSCP is maintained inside CAPWAP.
- C. The outer CAPWAP CoS is marked and capped and the inner DSCP maintains the original marking.
- D. No outer CAPWAP or inner QoS tagging is applied.
Answer: C
NEW QUESTION 46
What must be configured on ISE version 2.1 BYOD when using Single SSID?
- A. WPA2
- B. no authentication
- C. 802.1x
- D. open authentication
Answer: C
Explanation:
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/BYOD-configuration
NEW QUESTION 47
CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available?
(Choose two.)
- A. Allow SNMP traffic only before authentication and block all the traffic.
- B. Allow HTTP traffic only before authentication and block all the traffic.
- C. Allow all the traffic before authentication and intercept HTTPS only.
- D. Allow all the traffic before authentication and intercept HTTP only.
- E. Allow HTTPs traffic only before authentication and block all other traffic.
Answer: D,E
Explanation:
NEW QUESTION 48
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?
- A. rate-limit
- B. permit-ACL
- C. mark
- D. WMM required
Answer: C
Explanation:
NEW QUESTION 49
Which QoS level is recommended for guest services?
- A. platinum
- B. gold
- C. silver
- D. bronze
Answer: D
Explanation:
NEW QUESTION 50
......
300-430 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.exams4collection.com/300-430-latest-braindumps.html
Best Quality Cisco 300-430 Exam Questions: https://drive.google.com/open?id=1cAC8XvWwqogO_bHQjJDJAk1QxitrMnqj
