NS0-303 Study Guide: Latest [Oct 22, 2023] Realistic Verified NS0-303 Dumps
NS0-303 Questions & Practice Test are Available On-Demand
Network Appliance NS0-303 exam is a certification exam for those who want to become a NetApp Certified Hybrid Cloud Administrator. NS0-303 exam is designed to test the candidate's skills and knowledge of NetApp Hybrid Cloud Solutions, including the installation, configuration, and management of NetApp Data Fabric, NetApp Cloud Volumes, and NetApp HCI. NetApp Certified Hybrid Cloud - Administrator certification is highly valued in the IT industry, as it demonstrates an individual's expertise in managing hybrid cloud environments.
Network Appliance NS0-303 certification exam is designed for IT professionals who are seeking to prove their knowledge and expertise in managing hybrid cloud environments using NetApp technologies. NetApp Certified Hybrid Cloud - Administrator certification is ideal for administrators, architects, and engineers who are responsible for designing, deploying, and managing hybrid cloud infrastructures.
NEW QUESTION # 56
You have a cloud-connected storage system that is located in a collocation facility that uses a direct connect into AWS. The direct connect circuit is already configured, and it is working for the SVMs that were created earlier on the cluster.
You are creating a new SVM on the storage cluster in your collocation. You want your compute nodes in AWS to be able to connect to the storage on the newly created SVM. Which two steps must you perform to accomplish this task? (Choose two.)
- A. You must have an AWS Elastic Network IP (EIP) attached to the compute nodes in AWS.
- B. Create the protocol LIFs on the SVM that uses the VLAN interface ports.
- C. Create VLAN interface ports on cluster nodes.
- D. Set up a network connection to the Internet in the collocation.
Answer: B,C
NEW QUESTION # 57
You are using a NetApp HCI and are asked to perform offsite backups of all data. Which three targets satisfy this requirement? (Choose three.)
- A. Element software
- B. Amazon Redshift
- C. ONTAP9.5
- D. Amazon S3
- E. Azure Blob
Answer: B,D,E
NEW QUESTION # 58
Which component is essential for configuring a virtual private network between two public clouds?
- A. network link aggregation (LAG)
- B. customer gateway at a colocation facility
- C. private CIDR blocks for each cloud
- D. Border Gateway Protocol (BGP)
Answer: D
NEW QUESTION # 59
Which storage protocol is supported by Azure NetApp Files?
- A. NFS v3
- B. FC SAN
- C. NVMe
- D. iSCSI
Answer: D
NEW QUESTION # 60
You are an administrator of your NetApp Cloud Volumes ONTAP system in AWS. You want to tier backup data from the data protection volumes in your system to object storage to lower costs.
You are aware that some of the requirements for data tiering are met automatically by NetApp Cloud Manager.
In this scenario, which two criteria must be satisfied before enabling tiering from NetApp Cloud Manager? (Choose two.)
- A. Ensure that you have created an Amazon S3 bucket before you enable tiering from NetApp Cloud Manager.
- B. Ensure that you have tiering enabled on the aggregate in which your data protection volume exists.
- C. Ensure that you have internal connectivity using the VPC endpoint to the Amazon S3 service.
- D. Ensure that you have installed a tiering license before enabling data tiering from NetApp Cloud Manager.
Answer: B,C
NEW QUESTION # 61
You have a 100 TB Cloud Volumes Service NFS volume called vol1. You are asked to create a second read/write test copy of the volume called vol1_test. In this scenario, what is the fastest supported method to create vol1_test?
- A. Use Cloud Sync to synchronize voll to vol1_test.
- B. Use rsync to copy vol1 to vol1_test.
- C. Create vol1_test from a Snapshot copy.
- D. Use SnapMirror to mirror vol1 to vol1_test.
Answer: C
NEW QUESTION # 62
You are deploying a Cloud Volumes ONTAP HA system that uses multiple Availability Zones In AWS. You want to make sure that you can access the floating IP addresses in your Virtual Private Cloud (VPC. from your other VPCs in the same AWS region in which you have deployed your Cloud Volumes ONTAP HA system.
How do you accomplish this task?
- A. Use OnCommand Systems Manager to make floating IP addresses accessible between your VPCs.
- B. Use OnCommand Cloud Manager to make floating IP addresses accessible between your VPCs.
- C. Create peering between your VPCs using the AWS console.
- D. Use the AWS Transit Gateway service to create a route to your floating IP addresses.
Answer: B
NEW QUESTION # 63
Click the Exhibit button.
You are the administrator of Azure NetApp Files. You want to secure the NFS mount for your volume so that only the database server 10.10.8.14 can mount the volume.
Referring to the exhibit, to secure the volume, which two steps must you perform in the export policy? (Choose two.)
- A. Add a new index for 0.0.0.0/0 Read Only.
- B. Delete index 1.
- C. Add a new Index for 10.10.8.14/32 Read & Write.
- D. Modify Index 1 from Read & Write to No Access.
Answer: A,B
NEW QUESTION # 64
You have a Cloud Volumes ONTAP HA pair that is provisioned in multiple availability zones. All components of the ONTAP cluster are eligible for update. In this scenario, which two actions are performed during the upgrade when you use the default update options? (Choose two.)
- A. The HA pairs serve data during the upgrade process.
- B. The software image is pushed using HTTP
- C. The SnapMirror transfers continue during the upgrade process.
- D. The HA mediator is updated.
Answer: A,D
NEW QUESTION # 65
You are trying to deploy an OnCommand Cloud Manager from the marketplace to your Azure resource group, but the deployment fails.
In this situation, what caused this problem?
- A. An express route between your local network and Azure has a firewall rule that is set to deny.
- B. A virtual machine in your Azure resource group on which to deploy Cloud Manager has not been created.
- C. A subnet in your Azure resource group is not connected to your local company network.
- D. A custom role with the proper permissions has not been created.
Answer: A,D
NEW QUESTION # 66
You want to create your first volume that uses Cloud Volumes Service for AWS.
Which three requirements must your AWS environment have in this scenario? (Choose three.)
- A. the mapped SMB shares from the compute engine
- B. an AWS Virtual Private Cloud (VPC)
- C. the Virtual Private Gateway (VGW) that is connected to your Virtual Private Cloud (VPC)
- D. the defined routes that include the network on which the cloud volumes run
- E. a Cloud Sync data broker
Answer: A,B,C
NEW QUESTION # 67
Your application requires 24 TB of capacity and 400 MB/s of bandwidth. Referring to the exhibit, what is the most cost effective combination of capacity and service level for Cloud Volumes Service?
- A. Capacity 26 TB, Extreme Performance service level
- B. Capacity 24 TB, Standard Performance service level
- C. Capacity 26 TB, Standard Performance service level
- D. Capacity 24 TB, Premium Performance service level
Answer: C
NEW QUESTION # 68
As the administrator of NetApp Cloud Insights, you want to set up an alert on your on-premlses NetApp ONTAP system when a volume reaches 70% full.
In this situation, which two actions are required to accomplish this task? (Choose two.)
- A. Create an annotation for volume capacity.
- B. Create a Performance Policy.
- C. Set up an alert.
- D. Monitor the action field in Auditing Events.
Answer: A,C
NEW QUESTION # 69
You need to set permissions to launch OnCommand Cloud Manager in AWS public cloud without using Cloud Central.
In this scenario, to ensure that OnCommand Cloud Manager can launch successfully, which action would accomplish this task?
- A. Grant permissions to the OnCommand Cloud Manager instance.
- B. Grant permissions to the IAM User.
- C. Grant permissions to the account Admin User.
- D. Open a firewall rule for port 443 to my.netapp.com.
Answer: B
NEW QUESTION # 70
Which two network topologies would support SnapMirror data replication from Cloud Volumes ONTAP for Azure to Cloud Volumes ONTAP for AWS? (Choose two.)
- A. Virtual Private Cloud > AWS Transit Gateway
- B. Virtual Private Cloud (VPC. -> Azure Virtual Network (VNET) peering
- C. cloud provider -> on-premises -> cloud provider VPN
- D. cloud provider -> cloud provider VPN
Answer: C
NEW QUESTION # 71
You are the administrator for your company's Azure Infrastructure. You need to create a custom role to ensure that you can deploy Cloud Volumes ONTAP without using NetApp Cloud Central.
Which modification do you need to make to the JSON file to accomplish this task?
- A. Add the Azure Subscription ID.
- B. Add the Azure GUID.
- C. Modify the Azure VM ID.
- D. Modify the Azure IAM policy.
Answer: A
NEW QUESTION # 72
Your company has purchased a NetApp HCI. You are asked to deploy HA file services out of the NetApp HCI system.
Which two actions accomplish this task? (Choose two.)
- A. Provide an ONTAP cluster base license key.
- B. Use ONTAP Select Deploy.
- C. Provide an ONTAP Select license file.
- D. Select "Yes, I want to enable File Services" on the NetApp Deployment Engine.
Answer: B,C
NEW QUESTION # 73
You want to use the Notifications Platform Service on an S3 bucket in StorageGRID to send notifications in Amazon Simple Notification Service (SNS) and trigger a selective replication workflow to retrieve newly created objects in AWS and run artificial intelligence workloads.
When creating the SNS external endpoint in the StorageGRID tenant, you receive the error shown in the exhibit.
What should you do to solve this issue?
- A. The Platform Services must be enabled on the StorageGRID tenant before configuring the endpoint.
- B. The Access Key ID and the Secret Access Key must match the username and password in AWS.
- C. A Platform Services Proxy must be defined in the GRID Manager.
- D. The Key Pair used must match a user with access to the SNS service in AWS.
Answer: D
NEW QUESTION # 74
You are the administrator of your company's AWS infrastructure. Your manager asked you to set up the ability to determine how much each Cloud Volumes ONTAP Instance costs on a monthly basis. In this scenario, which three components must be configured to obtain these reports?
(Choose three.)
- A. The AWS payer accounts must be set up to store billing reports.
- B. AWS report tags must be enabled after all of your Cloud Volumes ONTAP instances are deployed.
- C. AWS report tags must be enabled after your first Cloud Volumes ONTAP instance is deployed.
- D. On Command Cloud Manager must have permissions to access the S3 bucket that stores AWS billing reports.
- E. You can download the report because AWS Billing reports exist by default.
Answer: B,C,D
NEW QUESTION # 75
......
Valid NS0-303 Exam Dumps Ensure you a HIGH SCORE: https://www.exams4collection.com/NS0-303-latest-braindumps.html
Pass NS0-303 Exam with Latest Questions: https://drive.google.com/open?id=1vykvV6aLrQeeFC6iAnucbUEnV0mRTZCq
