NS0-516 PDF Dumps Feb 07, 2022 Exam Questions – Valid NS0-516 Dumps
Ultimate NS0-516 Guide to Prepare Free Latest Network Appliance Practice Tests Dumps
NetApp NS0-516 Exam Certification Details:
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Passing Score | 75% |
| Exam Registration | PEARSON VUE |
| Number of Questions | 60 |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Exam Price | $150 USD |
NEW QUESTION 10
Which feature under SANtricity 11.x which requires an activation key? (Choose the best answer.)
- A. Volume copy
- B. Mirroring
- C. Snapshot copies
- D. Drive Security
Answer: B
NEW QUESTION 11
When replacing failed disks, what is a consideration for replacement disks?
- A. The replacement disk must be of greater capacity to rebuild the data structure from the failed disk.
- B. The replacement disk must match the security capabilities of the existing driver.
- C. The replacement disk can be of any technology; for example, an HDD can replace an SSD.
- D. The replacement disk must have DAC store already installed on it.
Answer: B
NEW QUESTION 12
In the Array Management window, which tab provides access to the Ethernet management port configuration and premium feature enablement?
- A. Setup
- B. Host Mappings
- C. Configuration
- D. Hardware
- E. Storage & Copy Services
Answer: A
NEW QUESTION 13
Which two errors would fail a pre-upgrade health check? (choose two.)
- A. An excess number of event log events are present
- B. I/O is being processed
- C. Volumes are reported on a non-preferred path
- D. Hot spares are in use
Answer: A,D
NEW QUESTION 14
Review the diagram.
Is this cabling correct or incorrect, and why? (Choose the best answer.)
- A. The cabling is incorrect because the controllers are cabled from the host port.
- B. The cabling is correct because it follows the recommended E-Series cabling method.
- C. The cabling is incorrect because it usesthe top-down bottom-up cabling method.
- D. The cabling is incorrect because they have been daisy-chained.
Answer: D
NEW QUESTION 15
What would be the minimum configuration required to support a drawer-protected 20-drive DDP? (Choose the best answer.)
- A. An E2712 with one DE6600 Expansion Chassis, containing a total of 72, 3TB NL-SAS drives.
- B. An E5460 with one DE6600 Expansion Chassis, containing a total of 120, 3TB NL-SAS drives.
- C. An E2624 with four DE5600 Expansion Chassis, containing a total of 6, 1.6TB SSD and 96, 3T NL-SAS drives.
- D. An E5424 with one DE5600 Expansion Chassis, containing a total of 48, 900GB SAS drives.
Answer: B
NEW QUESTION 16
The Netapp E-Series system with a 32 Gb FC Host Interface Card (HIC) requires which type of fiber cable to connect to switches or to connect directly to hosts extending up to 100 meters?
- A. OM2
- B. OM1
- C. OM3
- D. OM4
Answer: C
NEW QUESTION 17
An administrator is asked to create a Dynamic Disk Pools (DDP) pool from eleven 12 TB disks with the requirement that there is adequate space available for a reconstruction if a drive in the pool fails.
In this scenario, what should the administrator do to satisfy this requirement?
- A. Create the disk pool, and then add another 12 TB drive to the pool
- B. Create the disk pool, and then edit the pool to reserve 12 TB of space
- C. Create the disk pool, and then create a hot spare on another 12 TB disk
- D. Create the disk pool, and then the system automatically reserves 12 TB of space
Answer: C
NEW QUESTION 18
Hot spares provide what function?
- A. Spare capacity for volume groups in the event of disk failure
- B. Spare capacity for disk pools in the event of disk failure
- C. Efficiency for configuring volumes to maximize capacity usage
- D. Spare capacity for any volume on the storage system
Answer: A
NEW QUESTION 19
What are two base host connectivity selections that are provided by the E2800 controller? (Choose two.)
- A. IB
- B. FC
- C. SAS
- D. iSCSI
Answer: B,D
NEW QUESTION 20
What is the first step when replacing a FRU component on a running storage system? (Choose the best answer.)
- A. Use SANtricity to view the target component and place the component off-line or in service mode before removing the part.
- B. Power down the array before changing the part.
- C. Remove the part and check SANtricity for continuing errors.
- D. Disconnect the cables from the management ports.
Answer: A
NEW QUESTION 21
A NetApp recommended best practice is to cable disk shelves to a controller shelf using the top-down-bottom-up method.
Why?
- A. It protects against power outages.
- B. It protects against drawer failure.
- C. It protects against shelf failure.
- D. It protects against disk failure.
Answer: C
NEW QUESTION 22
Your company has deployed an E2824 and has decided to change the host protocol from iSCSI to FC You use the storage array profile to review the installed SFPs.
In this scenario, which set of supported data rates indicates that you are using dual-purpose SFPs?
- A. 25 Gbps, 10 Gbps
- B. 16 Gbps, 8 Gbps, 4 Gbps
- C. 32 Gbps, 16 Gbps, 8 Gbps, 4 Gbps
- D. 16 Gbps, 10 Gbps, 8 Gbps, 4 Gbps
Answer: D
NEW QUESTION 23
Schedules for AutoSupport's periodic collection of data can be changed in the ________. (Choose the best answer.)
- A. Array Management Window
- B. Enterprise Management Window
- C. Major Event Log
- D. NVSRAM
Answer: B
NEW QUESTION 24
Your AutoSupport does not automatically send reports to NetApp's ActiveIQ tool.
In this scenario, how do you access the data that would have been sent using the AutoSupport feature?
- A. Access the event log by using SANtricity System Manager
- B. Ask NetApp Support to help you to access the data by using special support tools
- C. Use SANtricity System Manager to manually collect the support data
- D. Use SANtricity Unified Manager to collect the support data remotely
Answer: C
NEW QUESTION 25
How many 32 Gb ports are on one FC host interface card (HIC) on the NetApp E2800, EF280, E5700, and EF570 systems?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 26
When data is written to a snapshot, volume is stored __________. (Choose the best answer.)
- A. on the repository area associated with the snapshot's corresponding image
- B. on a hot spare drive
- C. on the repository associated with the snapshot volume
- D. on the base volume for that snapshot
- E. on the common repository for the snapshot group
Answer: E
NEW QUESTION 27
......
Passing Key To Getting NS0-516 Certified Exam Engine PDF: https://www.exams4collection.com/NS0-516-latest-braindumps.html
Get Top-Rated Network Appliance NS0-516 Exam Dumps Now: https://drive.google.com/open?id=1M8nlwJKe1CnryDQS1jSgVn1Bd9qOQcQH
