NSE7_EFW-6.4 PDF Pass Leader, NSE7_EFW-6.4 Latest Real Test
Valid NSE7_EFW-6.4 Test Answers & NSE7_EFW-6.4 Exam PDF
What is the duration, language, and format of the Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
- Duration of Exam: 60 minutes
- Examination platform: Online proctored
- Number of questions: 30
- Language of Exam: English and Japanese
How to study the Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
Authorized Training Centers (ATC) are available and can be located from this link. Fortinet ATCs provide a global network of training centers that deliver expert-level training in local languages, in more than a hundred countries. Further, Fortinet offers training in two different modes, public and private/ custom. Public training content is based on the standard NSE training curriculum. Customization is not possible for public training sessions. In private training, Fortinet instructors deliver the private training session onsite at the customerâs facility, or online through a virtual classroom application. There are several options for training delivery as well.
- Self-Paced E-Learning Training: Students can access previously recorded lessons, online videos, and quizzes on the NSE Institute portal to gain essential knowledge
- Onsite Instructor-Led Training: This is the traditional training that occurs in a classroom, where the instructor presents the material to the students in the same facility
- Online/Virtual Instructor-Led Training: This is an instructor-led training that is delivered live over the Internet. Students attend sessions using an online classroom application
So, the websites provide all the necessary training courses and candidates can take these courses to prepare for this exam. But no preparation is complete without the practice of dumps, hence NSE7 EFW-6.4 dumps are necessary to prepare for this exam. These NSE7 EFW-6.4 dumps pdf serve as practice questions and help candidates to understand what the exam environment will be like. The difficulty of any exam is a relative phenomenon. Also, it is quite tough to answer this without knowing your academic background and whether you have any prior exposure to financial markets. If you have prior exposure in the field of financial markets and follow the markets regularly, I think you will do just fine. However, if you are completely new to this field, you may have a hard time understanding a few concepts, but it is still manageable.
Introduction to Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
This exam is part of the preparation for the NSE 7 certification exam. The Fortinet Network Security Architect designation identifies your advanced skills in deploying, administering, and troubleshooting Fortinet security solutions. We recommend this certification for network and security professionals who are involved in the advanced administration and support of security infrastructures using Fortinet solutions. Visit the Fortinet NSE Certification Program page for information about certification requirements. You must pass a minimum of two Fortinet NSE 7 certification tests successfully:
- Fortinet NSE 7 - Cloud Security
- Fortinet NSE 7 - SD-WAN
- Fortinet NSE 7 - Advanced Analytics
- Fortinet NSE 7 - Secure Access
- Fortinet NSE 7 - Advanced Threat Protection
- Fortinet NSE 7 - Enterprise Firewall
- Fortinet NSE 7 - Enterprise Firewall 6.4 NSE7 EFW-6.4 exam test
The NSE 7 Network Security Architect designation recognizes your advanced skills and ability to deploy, administer, and troubleshoot Fortinet security solutions. To obtain certification, you must pass at least one Fortinet NSE 7 exam. NSE 7 certification is valid for two years from the date of completion. you will learn how FortiGate, FortiAP, FortiSwitch, and FortiAuthenticator enable secure connectivity over wired and wireless networks. You will also learn how to provision, administer, and monitor FortiAP and FortiSwitch devices using FortiManager. This course covers the deployment, integration, and troubleshooting of advanced authentication scenarios, as well as best practices for securely connecting wireless and wired users. You will learn how to keep the network secure by leveraging Fortinet Security Fabric integration between FortiGate, FortiSwitch, FortiAP, and FortiAnalyzer to automatically quarantine risky and compromised devices using IOC triggers.
NEW QUESTION 52
An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs thedebug flow while attempting the connection using HTTP. The output of the debug flow is shown in the exhibit:
Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)
- A. Redirection of HTTP to HTTPS administrative access is disabled.
- B. HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.
- C. HTTP administrative access is configured with a port number different than 80.
- D. The packet is denied because of reverse path forwarding check.
Answer: B,C
NEW QUESTION 53
Examine the output of the 'diagnose sys session list expectation' command shown in the exhibit; than answer the question below.
Which statement is true regarding the session in the exhibit?
- A. It was created by the FortiGate kernel to allow push updates from FotiGuard.
- B. It is for traffic originated from the FortiGate.
- C. It was created by a session helper or ALG.
- D. It is for managementtraffic terminating at the FortiGate.
Answer: C
NEW QUESTION 54
Examine the partial output from the IKE real time debug shown in the exhibit; then answer the question below.
Why didn't the tunnel come up?
- A. One IPsec gateway is using main mode, while theother IPsec gateway is using aggressive mode.
- B. The remote gateway's Phase-1 configuration does not match the local gateway's phase-1 configuration.
- C. IKE mode configuration is not enabled in the remote IPsec gateway.
- D. Theremote gateway's Phase-2 configuration does not match the local gateway's phase-2 configuration.
Answer: B
NEW QUESTION 55
Examine the output from the BGP real time debugshown in the exhibit, then the answer the question below:
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. The state of the remote BGP peer will go toConnectafter it confirms the received prefixes.
- B. Local BGP peer received a prefix fora default route.
- C. The state of the remote BGP peer isOpenConfirm.
- D. BGP peers have successfully interchangedOpenandKeepalivemessages.
Answer: B,D
NEW QUESTION 56
An administrator has configured two FortiGate devices for an HA cluster. While testing the HA failover, the administrator noticed that some of the switches in the network continue to send traffic to the former primary unit. The administrator decides to enable the setting link-failed-signal to fix the problem. Which statement is correct regarding this command?
- A. Sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.
- B. Disables all the non-heartbeat interfaces in all the HA members for two seconds after a failover.
- C. Sends a link failed signal to all connected devices.
- D. Forces the former primary device to shut down all its non-heartbeat interfaces forone second while the failover occurs.
Answer: D
NEW QUESTION 57
An LDAP user cannot authenticate against a FortiGate device. Examine the real time debug output shown in the exhibit when the user attempted the authentication; thenanswer the question below.
Based on the output in the exhibit, what can cause this authentication problem?
- A. User student is using a wrong password.
- B. User student is not found in the LDAP server.
- C. The FortiGate has been configured with thewrong password for the LDAP administrator.
- D. The FortiGate has been configured with the wrong authentication schema.
Answer: B
NEW QUESTION 58
AFortiGate's portl is connected to a private network. Its port2 is connected to the Internet. Explicit web proxy is enabled in port1 and only explicit web proxy users can access the Internet. Web cache is NOT enabled. An internal web proxy user is downloading a file from the Internet via HTTP. Which statements are true regarding the two entries in the FortiGate session table related with this traffic? (Choose two.)
- A. Both session have the local flag on.
- B. One session has the proxy flag on, the other one does not.
- C. One of the sessions has the IP address of port2 as the source IP address.
- D. The destination IP addresses of both sessions are IP addresses assigned to FortiGate'sinterfaces.
Answer: A,C
NEW QUESTION 59
View the exhibit, which contains a session entry, and then answer the question below.
Which statement is correct regarding this session?
- A. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
- B. It is an ICMP session from 10.1.10.10 to 10.200.5.1.
- C. It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.
- D. It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.
Answer: B
NEW QUESTION 60
The logs in a FSSO collector agent (CA) are showing the following error:
failed to connect to registry: PIKA1026 (192.168.12.232)
What can be the reason for this error?
- A. The remote registry service is not running in the workstation 192.168.12.232.
- B. The FortiGate cannot resolve the name of the workstation.
- C. The CA cannot reach the FortiGate with the IP address192.168.12.232.
- D. The CA cannot resolve the name of the workstation.
Answer: A
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD30548
NEW QUESTION 61
Refer to the exhibit, which contains the partial output of a diagnose command.
Based on the output, which two statements arecorrect? (Choose two.)
- A. Quick mode selectors are disabled.
- B. Remote gateway IP is 10.200.4.1.
- C. Anti-replay is enabled.
- D. DPD is disabled.
Answer: B,C
NEW QUESTION 62
What events are recorded in the crashlogs of a FortiGate device? (Choose two.)
- A. A process crash.
- B. System entering to and leaving from the proxy conserve mode.
- C. Changes in the status of any of the FortiGuard licenses.
- D. Configuration changes.
Answer: A,B
Explanation:
Explanation
diagnose debug crashlog read
275: 2014-08-05 13:03:53 proxy=acceptor service=imap session fail mode=activated276: 2014-08-05
13:03:53 proxy=acceptor service=ftp session fail mode=activated277: 2014-08-05 13:03:53 proxy=acceptorservice=nntp session fail mode=activated278: 2014-08-06 11:05:47 service=kernel conserve=on free="45034 pages" red="45874 pages" msg="Kernel279: 2014-08-06 11:05:47 enters conserve mode"280: 2014-08-06 13:07:16 service=kernel conserve=exit free="86704 pages" green="68811 pages"281: 2014-08-06 13:07:16 msg="Kernel leaves conserve mode"282: 2014-08-06
13:07:16 proxy=imd sysconserve=exited total=1008 free=349 marginenter=201283: 2014-08-06 13:07:16 marginexit=302
NEW QUESTION 63
An administrator wants to capture ESP traffic between two FortiGates using the built-in sniffer.If the administrator knows that there is no NAT device located between both FortiGates, what command should the administrator execute?
- A. diagnose sniffer packet any 'udp port 500'
- B. diagnose sniffer packet any 'udp port 500 or udp port 4500'
- C. diagnose snifferpacket any 'esp'
- D. diagnose sniffer packet any 'udp port 4500'
Answer: C
Explanation:
Explanation
Capture IKE Traffic without NAT:diagnose sniffer packet 'host and udp port 500'
--------------------------------------Capture ESP
Traffic without NAT:diagnose sniffer packet any 'host and esp'
--------------------------------------Capture IKE
and ESP with NAT-T:diagnose sniffer packet any 'host and (udp port 500 or udp port 4500)'
NEW QUESTION 64
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Which statements about this debug output are correct? (Choose two.)
- A. The remote gateway IP address is 10.0.0.1.
- B. It showsa phase 1 negotiation.
- C. The negotiation is using AES128 encryption with CBC hash.
- D. The initiator has provided remote as its IPsec peer ID.
Answer: B,D
NEW QUESTION 65
Examine the following partial outputs from two routing debug commands; then answer the question below.
# get router info kernel
tab=254 vf=0 scope=0type=1 proto=11 prio=00.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.1.254 dev=2(port1) tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.2.254 dev=3(port2) tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254 gwy=0.0.0.0 dev=4(port3)
# get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2,
[10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2 Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?
- A. port!
- B. Both portl and port2.
- C. port3.
- D. port2.
Answer: D
NEW QUESTION 66
View the exhibit, which contains the partial output of adiagnose command, and then answer the question below.
Based on the output, which of the following statements is correct?
- A. Quick mode selectors are disabled.
- B. DPD is disabled.
- C. Anti-reply is enabled.
- D. Remote gateway IP is 10.200.5.1.
Answer: C
NEW QUESTION 67
View the central management configuration shown in the exhibit, and then answer the question below.
Which serverwill FortiGate choose for antivirus and IPS updates if 10.0.1.243 is experiencing an outage?
- A. 10.0.1.242
- B. 10.0.1.240
- C. 10.0.1.244
- D. One of the public FortiGuard distribution servers
Answer: D
NEW QUESTION 68
How does FortiManager handle FortiGuard requests from FortiGate devices, when it is configured as a local FDS?
- A. FortiManager can download and maintain local copies of FortiGuard databases.
- B. FortiManager will respond to update requests only if they originate from a managed device.
- C. FortiManager supports only FortiGuard push to managed devices.
- D. FortiManager does not support rating requests.
Answer: A
NEW QUESTION 69
An administrator has enabled HA session synchronization in a HA cluster with two members. Which flag is added to a primary unit's session to indicate that it has been synchronized to the secondary unit?
- A. synced
- B. dirty.
- C. nds.
- D. redir.
Answer: A
Explanation:
Explanation
The synced sessions have the 'synced' flag. The command 'diag sys session list' can be used to see the sessions on the member, with the associated flags.
NEW QUESTION 70
Which real time debug should an administrator enable to troubleshoot RADIUS authentication problems?
- A. Diagnose debug application fnbamd -1.
- B. Diagnose radius console -log enable.
- C. Diagnose debug application radius -1.
- D. Diagnose authd console -log enable.
Answer: A
NEW QUESTION 71
Examine the following traffic log; then answer the question below.
date-20xx-02-01 time=19:52:01 devname=master device_id="xxxxxxx" log_id=0100020007 type=event subtype=system pri critical vd=root service=kemel status=failure msg="NAT port is exhausted." What does the log mean?
- A. The limit for the maximum number of entries in the NAT port table has been reached.
- B. The limit for the maximum number of simultaneous sessions sharing the same NAT port has been reached.
- C. FortiGate does not have any available NAT port for a new connection.
- D. There is not enough available memory in the system to create a new entry inthe NAT port table.
Answer: B
NEW QUESTION 72
Refer to the exhibit, which contains a TCL script configuration on FortiManager.
An administrator has configured the TCL script onFortiManager, but failed to apply any changes to the managed device after being executed.
Why did the TCL script fail to make any changes to the managed device?
- A. Incomplete commands are ignored in TCL scripts.
- B. The TCL command run_cmd has not been created.
- C. The TCLscript must start with #include <>.
- D. Changes in an interface configuration can only be done by CLI script.
Answer: B
NEW QUESTION 73
......
NSE7_EFW-6.4 Dumps Ensure Your Passing: https://www.exams4collection.com/NSE7_EFW-6.4-latest-braindumps.html
