[Sep-2021] Updated NCS Professional NCS-Core Exam Questions BUNDLE PACK
Master The Nutanix Content NCS-Core EXAM DUMPS WITH GUARANTEED SUCCESS!
NEW QUESTION 63
A customer wants to use NIC teaming on an ESXi host using a vSphere Standard Switch configured with the Route based on physical NIC load load balancing option. The customer does not see the option when editing the Teaming and Failover settings for the switch.
How should the consultant resolve this issue?
- A. Add a vSphere Distributed Switch
- B. Install a vCenter server to manage the switch
- C. Add another physical NIC to the team.
- D. Change the load balancing option on the switch.
Answer: A
NEW QUESTION 64
A customer needs a DR solution designed around the following requirements:
* There are 8 ms of latency between Sites A and B
* The administrator needs the shortest RPO/RTO possible
* Application consistent snapshots are required
* Use of NutanixVSS
Which Data Protection Method should be used?
- A. Async
- B. Metro Availability
- C. Cloud Connect
- D. Near Sync
Answer: D
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Prism-Element-Data-Protection-Guide-v5_18:w
NEW QUESTION 65
A consultant needs to verify the make and model of the systems that will be imaged with Foundation. The consultant does not have the Bill of Materials (BOM) available to review.
When should the consultant verify the make and model to prepare for the cluster deployment?
- A. Upon arriving on-site
- B. During the Foundation Process
- C. While conducting the Tech Review Call
- D. When reviewing the Statement of Work (SOW)
Answer: B
NEW QUESTION 66
A customer would like to re-image an existing cluster. The Foundation Applet and Foundation VM is unavailable to them.
How can the consultant access Foundation-as-a-Service (FaaS)?
- A. Through <CVM-IP> :9443
- B. Through <cluster-IP> :8000
- C. Through <cluster-IP> :9443
- D. Through <CVM-IP> :8000
Answer: D
NEW QUESTION 67
An administrator finds that home shares cannot be configured in a new Files 3.5 deployment. Why is this happening?
- A. NFS default access is set to Read Only.
- B. Access Based Enumeration is not enabled.
- C. The system is deployed as a single FSVM.
- D. Multi-protocolaccess is not configured.
Answer: C
Explanation:
NEW QUESTION 68
An organizations Nutanix Cluster is based on VMware vSphere. The cluster is configured to download software updates automatically. The administration needs to verify and eventually upgrade VMware hypervisor via Prism Ul.
After logging in to Prism, the administrator receives the message shown:
No available versions for upgrade
What is causing the current state?
- A. VMware support has expired, so downloads are not available.
- B. The environment is running the latest vSphere version, so no update is required.
- C. vSphere binaries need to be manually uploaded.
- D. The cluster is unable to connect to reIease-api.nutanix-ccm:8D.
Answer: B
Explanation:
Explanation
ref:https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v510:upg-hypervisor
NEW QUESTION 69
An organization is planning an upgrade to AOS 5.15 and wants to understand which cluster products and/or services are supported for physical traffic isolation.
Which Nutanix component supports its network traffic being isolated onto its own virtual network?
- A. Containers
- B. Volumes
- C. Files
- D. Objects
Answer: B
NEW QUESTION 70
The following alert appears on the file server alerts tab in the file server dashboard:
Which two events can generate this alert? (choose two)
- A. A node is set to the maintenance mode in a three node cluster.
- B. A three-node dusterhosting the file server is undergoing AOS upgrade.
- C. A Nutanix file with four hie server VMs is deployed on a three-node duster.
- D. A node failed in a three-node cluster.
Answer: A,B
NEW QUESTION 71
An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?
- A. Expand the cluster to 48 nodes distributed evenly across 6 racks
- B. Expand the cluster to 60 nodes distributed evenly across 6 racks
- C. Expand the cluster to 50 nodes distributed evenly across 5 racks
- D. Expand the cluster to 40 nodes distributed evenly across 5 racks
Answer: B
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_17:arc-configure
NEW QUESTION 72
An administrator is using Nutanix Move to migrate aWindows VM from ESXi to AHV. Automated guest preparation is failing with an error:
Account has UAC enabled error
The administrator is using the local built-in administrator account for the Windows VM Admin approval mode must remain enabled.
What should theadministrator do to continue with the migration with Nutanix Move?
- A. Place Windows VM in Maintenance Mode
- B. Reboot the Windows VM and try the migration again
- C. Use a Domain Admin account for the Windows VM
- D. Follow manual VM preparation guidelines
Answer: D
Explanation:
Explanation
https://next.nutanix.com/move-application-migration-19/nutanix-xtract-validation-failed-user-must-belong-in-a-g
NEW QUESTION 73
Refer to the exhibits.
A consultant is trying to test port failover on the node shown in the first exhibit. A continuous ping test is performed to the host. The consultant shuts down one of the links, after which the host ping request times out.
The consultant tries to troubleshoot the issue with the customer and sees the information shown in the second exhibit on their Cisco Switches:
What is causing the issue?
- A. Bad SPF+ cables are on the active interface.
- B. PortFast is not enabled on the port connected to the host.
- C. There is a Native VLAN mismatch on the switchport.
- D. The wrong VLAN is tagged on the host.
Answer: C
NEW QUESTION 74
A consultant notices while assigning VLAN tags to hosts and CVMs in a running cluster, that Prism Element displays alerts indicating a node is down.
What should the consultant do to prevent these alerts?
- A. Restart the Nutanix cluster.
- B. Only change the Controller Virtual Machine VLANs.
- C. Stop the Nutanix cluster before changing VLANs.
- D. Only change the hypervisor VLANs.
Answer: C
NEW QUESTION 75
A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.
However, users are able to mount all three containers.
What is causing this problem?
- A. A Container-level whitelist entry was configured.
- B. A Global whitelist entry was configured.
- C. Compression was turned on for all containers.
- D. Deduplication was turned on for all containers.
Answer: B
NEW QUESTION 76
A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.
Which two configuration changes should the consultant make next? (Choose two.)
- A. Open terminal and configure via ifconfig command.
- B. Configure the static IP address through the desktop virtualization software.
- C. Ensure the vNIC is set to bridged adapter.
- D. Run the set_foundation_ip_address application on the VM desktop.
Answer: C,D
NEW QUESTION 77
After finishing foundation on an AHV cluster, a consultant is preparing to plug into the customer network given the following set of requirements:
* All network traffic on trunks is tagged
* Customer is using LACP
* A native VLAN is not in use
Which set of commands should the consultant use to ensure cluster connectivity on customer equipment?
- A. change_cvm_vlan 0
ovs-vsctl set port br0 tag=0
ovs-vsctl set port br0-up bond_mode=balance-tcp - B. change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-tcp - C. change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-slb - D. change_cvm_vlan 0
ovs~vsctl set port br0 tag=0
ovs~vsctl set port br0-up bond_mode=active-backup
Answer: A
NEW QUESTION 78
An administrator needs to make sure an RF2 cluster can survive a complete rack failure without negatively effecting workload performance. The current cluster configuration consists of thefollowing:
* 30 nodes: distributed 10 nodes per rack across three 42U rack
* Each nodes is configured with 40TB usable storage all flash (Cluster Total 1.2 PB Usable)
* Current cluster utilization is 900TB storage
Which configuration changes should be made to make sure that the cluster meets the requirements?
- A. Expanse the cluster by adding 2 additional nodes per rack, 6 nodes total.
- B. Expanse the cluster by adding 3 additional nodes per rack, 9 nodes total.
- C. Expanse thecluster by adding 9 nodes to a new 42U rack
- D. Expanse the cluster by adding 8 nodes to a new 42U rack
Answer: B
Explanation:
NEW QUESTION 79
An administrator receives reports that VDI desktop performance in an 8-nodeNutanix VDI environment is poor. Opening applications takes between 1 and 2 minutes.
When investigating the issue, the following conditions are found:
* Cluster memory utilization: 80%
* Cluster SSD utilization: 70%
* Average VM CPU Wait Time: 11%
*CVM CPU utilization: 75%
Which action should be taken to improve VDI performance?
- A. Add CPU resources to the cluster.
- B. Increase the amount of SSD storage in the cluster.
- C. Increase the number of vCPU cores allocated to the CVM.
- D. Add memory to the nodes in the cluster.
Answer: A
NEW QUESTION 80
After deploying an AHV cluster connected to Cisco Nexus 9k switches, unexpected network behavior is observed. The consultant needs to rule out physical network mis-cabling without returning to the datacenter.
Which command from the host should the consultant run?
- A. show lldp neighbors
- B. show interfaces
- C. show cdp neighbors
- D. lldpctl
Answer: D
NEW QUESTION 81
An administrator manages the following two Nutanix AOS 5.15 cluster environment:
* Corp-cluster-01
* Corp-cluster-02
The VM images must be available only onCorp-cluster-01, but cannot be checked out to cluster Corp-cluster-02. The images also cannot be checked out to any other clusters that are registered with Prism Central in the future.
Which two configuration settings must the administrator choose when creating the image placement policy that satisfies the stated requirements? (Choose two.)
- A. Create an image placement policy that identifies cluster Corp-cluster-01 as the target cluster
- B. Set the policy enforcement to Soft.
- C. Set the policy enforcement toHard.
- D. Create an image placement policy that identifies cluster Corp-cluster-02 as the target cluster.
Answer: A,C
Explanation:
Explanation
Ref:https://next.nutanix.com/community-blog-40/nutanix-just-made-ahv-image-management-painless-33144
NEW QUESTION 82
A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:
* Solution must follow Nutanix Best Practices
* Network configuration should be redundant
* A vSphere Standard Switch must be utilized
Which load balancing method should be used?
- A. Route based on originating port ID
- B. Route based on source MAC hash
- C. Route based on physical NIC load
- D. Route based on IP hash
Answer: A
NEW QUESTION 83
Refer to the exhibit.
A consultant is deploying a cluster using the customer-provided IP addressing information.
Which option in Foundation must be configured to ensure connectivity during the deployment?
- A. Network Segmentation
- B. Multi-homing
- C. Link Aggregation
- D. Range Autofill
Answer: B
NEW QUESTION 84
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed.
The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Create asecurity policy with a service chain directing that VMs traffic to the firewall VM
- B. Disable the vNIC on the affected VM
- C. Create a firewall rule that blocks VM traffic but permits diagnostic access
- D. Quarantine the VM using the Forensic Method
Answer: D
Explanation:
Explanation
Refhttps://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION 85
......
Pass Nutanix NCS-Core Exam – Experts Are Here To Help You: https://www.exams4collection.com/NCS-Core-latest-braindumps.html
Get Latest NCS Professional NCS-Core Practice Test For Quick Preparation: https://drive.google.com/open?id=1nNjiLNbvFGPX-vvQTD08kCnW0VobBYko
