[UPDATED 2024] Read D-PDC-DY-23 Study Guide Cover to Cover as Literally
100% Real & Accurate D-PDC-DY-23 Questions and Answers with Free and Fast Updates
NEW QUESTION # 40
In a PIM Sparse Mode (PIM-SM) based multicast topology, what function does the Rendezvous Point provide?
- A. The root node of the source tree topology is used to provide routing between the source and receiver.
- B. The node is used to provide IGMP snooping on a layer 2 shared segment.
- C. The node is used to provide IGMP snooping across a layer 3 boundary.
- D. The root node of the shared tree topology is used to provide routing between the source and receiver.
Answer: D
NEW QUESTION # 41
A network administrator wants to limit the amount of bandwidth that video traffic can consume.
Which type of policy map should be used?
- A. Control plane
- B. Queuing
- C. It is not possible to limit bandwidth using policy maps
- D. Application
Answer: B
NEW QUESTION # 42
In a VRRP configured environment without VLT, how does the backup VRRP peer respond to ARP requests?
- A. Sends an ICMP redirect message
- B. Does not respond to ARP requests
- C. Responds to ARP requests with the MAC address of the virtual IP address
- D. Responds to ARP requests with the MAC address of the master peer's IP
Answer: B
NEW QUESTION # 43
Refer to the exhibit:
Which command is used to recover the UFD group when the upstream interface normalizes?
- A. clear ufd-disable uplink-state-group UFD_Group 01
- B. clear ufd-disable interface ethernet 1/1/ 1
- C. clear ufd disable UED Croup 01
- D. clear ufd disable interface ethernet 1/1/3 1/1/ 4
Answer: A
NEW QUESTION # 44
When implementing the VRRP tracking feature, what is the default priority exist of a tracked interface?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 45
Using the MAC 8c-ec-4b-5b-61-9d, what is a valid EUI-64 link local address?
- A. ff80:a9:8eec:4bff:fe5b:619d
- B. fe80::a9:8cec:4bff:fe5b:619d
- C. fe80::a9:8eec:4bff:fe5b:619d
- D. 2001::a9:8eec:4bff:fc5b:619d
Answer: C
NEW QUESTION # 46
From which range can a network administrator choose when setting the RSTP priority value?
- A. 0-614400
- B. 0-61440
- C. 1-64
- D. 1-6400
Answer: B
NEW QUESTION # 47
What should be disabled on an interface before disabling LLDP transmit capability?
- A. STP
- B. VLAN 1
- C. Loop Guard
- D. LLDP-MED
Answer: D
NEW QUESTION # 48
Which two spanning-tree methods are supported by VLT on a Dell Z9284F-ON? (Select 2)
- A. RSTP
- B. MSTP
- C. RSTP-PV
- D. STP
Answer: A,B
NEW QUESTION # 49
What is the valid range of VLAN IDs for Dell EMC Networking OS10 switches?
- A. 1-4093
- B. 0-4095
- C. 1-4096
- D. 0-4092
Answer: A
NEW QUESTION # 50
What does BGP use for reliable transport?
- A. DCCP
- B. SCTP
- C. TCP
- D. UDP
Answer: C
NEW QUESTION # 51
Refer to the exhibit:
A network administrator is validating a VLT domain configuration using the show vlt all command.
Which user configurable VLT setting shows a default value?
- A. Peer-routing status
- B. VLT MAC address
- C. Delay-restore timer
- D. Role priority
Answer: C
NEW QUESTION # 52
What is an attribute of OS10 Enterprise Edition?
- A. Provides a GUI
- B. Free download
- C. Includes full programmability
- D. No license needed
Answer: C
NEW QUESTION # 53
Multicast flood restrict is a feature enabled by default on OS10 switches to ensure that no traffic drop occurs.
What is a recommended configuration step for its implementation?
- A. Configure the interface between the PIM routers as a dynamic multicast router port
- B. Disable IGMP snooping on the VLAN between two PIM routers with no IGMP receivers on that VLAN
- C. Configure the interface between the PIM routers and the rendezvous point as a static multicast router port
- D. Enable IGMP snooping on the VLAN interfaces between two PIM routers with no IGMP receivers
Answer: B
NEW QUESTION # 54
Data center switches have been configured to authenticate users using a RADIUS server. A user that successfully logs into a switch has been given netoperator rights, when they expected sysadmin rights.
What is a possible reason for the user being assigned netoperator rights?
- A. The username does NOT exist in the RADIUS server
- B. The RADIUS server is not reachable by the switch
- C. The user must enter enable mode to receive sysadmin rights
- D. The RADIUS server did NOT respond with a Dell-EMC-Group-Name value
Answer: D
NEW QUESTION # 55
Which OSPF router is responsible for originating Network Link State Advertisements?
- A. Area Border Router
- B. Backbone Router
- C. Internal Router
- D. Designated Router
Answer: D
NEW QUESTION # 56
......
Reliable Study Materials for D-PDC-DY-23 Exam Success For Sure: https://www.exams4collection.com/D-PDC-DY-23-latest-braindumps.html
