Updated Nov 11, 2023 Verified 300-610 dumps Q&As - 100% Pass
New 2023 Latest Questions 300-610 Dumps - Use Updated Cisco Exam
NEW QUESTION # 69
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
- A. SAN port channel
- B. vPC+
- C. LACP port channel
- D. E-Trunk
Answer: C
Explanation:
Section: Compute Design
NEW QUESTION # 70
An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication.
Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)
- A. one NVE to many multicast groups
- B. one VNI to one multicast group
- C. many VNI to many multicast groups
- D. many NVE to one multicast group
- E. many VNI to one multicast group
Answer: D,E
NEW QUESTION # 71
An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series I/O Module. The company's strict security policy requires that the port be in-band. The engineer must also keep these considerations in mind:
The customer's security requirements mandate the use of a secure management mechanism that supports authentication and encryption.
The port should support management over IP.
Which port type must be used to meet these requirements?
- A. management port
- B. Ethernet port
- C. console port
- D. connectivity management port
Answer: C
NEW QUESTION # 72
The user traffic destined to all web servers located in the data center must pass first through a set of firewalls for deep packet inspection. A network architect must design the Cisco Intelligent Traffic Director (ITD) deployment that meets these requirements:
The firewalls are connected to a set of two Cisco Nexus switches to provide stateful handling of traffic.
The ITD service is provided for inside and outside segments of the firewall.
Which ITD deployment mode must be implemented to meet these requirements?
- A. sandwich deployment mode
- B. server load-balancing deployment mode
- C. server vPC deployment mode
- D. one-arm deployment mode
Answer: D
NEW QUESTION # 73
An engineer must connect a storage array directly to an existing Cisco UCS Fabric Interconnect. The customer requires a solution that provides IP-based storage that does not need to be connected through an external switch Also, the operations team wants to have the ability to have direct access to the files stored on the storage array from their Linux hosts. Which storage technology meets these requirements?
- A. SCSI
- B. SAN
- C. FCoE
- D. NAS
Answer: D
NEW QUESTION # 74
A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?
- A. virtual interface
- B. vPC
- C. port channel
- D. physical port
Answer: A
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-6300-series- fabric-interconnects/cisco-unified-fabric.pdf
NEW QUESTION # 75
A company Is using Cisco UCS and wants a network orchestration solution to meet these requirements :
centrally manage compute and storage platforms
reduce the time it takes to detect an outage
easily exchange data with TAC to reduce resolution times
The company does not have in-house knowledge about scripting. Which solution must the company choose?
- A. Cisco UCS Central
- B. Cisco Intersight
- C. Cisco DCNM
- D. Cisco HyperFlex
Answer: B
NEW QUESTION # 76
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. NPIV mode
- B. NPV mode
- C. FC end-host mode
- D. FC switching mode
Answer: D
Explanation:
Explanation
Section: Storage Network Design
NEW QUESTION # 77
An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?
- A. Data group
- B. Control group
- C. FHRP filter
- D. ARP filter
Answer: C
Explanation:
Reference:
NEW QUESTION # 78
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 79
What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?
- A. Cisco HyperFlex Edge provides native container support through the KVM hypervisor.
- B. Cisco UCS Manager provides service profile portability across nodes.
- C. Cisco UCS 5108 Blade Server chassis provides SEEPROM connectivity to solve split-brain scenarios.
- D. Cisco Intersight automatically creates an invisible cloud witness.
Answer: D
NEW QUESTION # 80
Refer to the exhibit.
Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:
The traffic from each of the server must be redundant and isolated.
The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
- B. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
- C. Create a SAN port channel that faces the storage device to sustain a link failure.
- D. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
Answer: D
NEW QUESTION # 81
An engineer Installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized. Which two elements should be used in this environment? (Choose two.)
- A. Cisco UCS VIC 1280
- B. Cisco UCS M81KR
- C. eight twinax cables from each I/O module to each fabric interconnect
- D. four twinax cables from each I/O module to each fabric Interconnect
- E. Cisco UCS VIC 1225
Answer: A,C
Explanation:
2208 has 8 uplinks. VIC 1225 only works on C-Series UCS. M81KR has only 2x10G ports. VIC 1280 has 8x10G ports.
NEW QUESTION # 82
Refer to the exhibit.
A high-availability setup for iSCSI is designed with the host running ISCSI software. Each storage port on the MDS exports the same two Fibre Channel target ports with different ISCSI target names. In this design, how many ISCSI session are created from the host so that recovery occurs if any component fails?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_2/ciscsi.html
NEW QUESTION # 83
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2158 bytes
- B. 2000 bytes
- C. 9000 bytes
- D. 2240 bytes
Answer: B
NEW QUESTION # 84
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for external connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network.
Which two solutions must be used to meet these requirements? (Choose two.)
- A. Distributed Anycast Gateway
- B. DC Interconnect
- C. Inter-Site Network
- D. Spanning Tree Protocol
- E. VRF-Lite
Answer: A,B
NEW QUESTION # 85
......
Latest 300-610 Exam Dumps Cisco Exam from Training: https://www.exams4collection.com/300-610-latest-braindumps.html
Pass Cisco 300-610 PDF Dumps Recently Updated 206 Questions: https://drive.google.com/open?id=1fUMSdS8wKJMTII1TH0qcxodhITkEkNUd
