[Mar 17, 2023] New Network Appliance NS0-176 Dumps with Test Engine and PDF (New Questions)
Pass Your NS0-176 Exam Easily - Real NS0-176 Practice Dump Updated
NetApp NS0-176 Exam Certification Details:
| Number of Questions | 60 |
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Duration | 60 minutes |
| Exam Code | NS0-176 FlexPod |
| Passing Score | 68% |
| Sample Questions | NetApp NS0-176 Sample Questions |
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Configuration | - Describe how to install and configure the FlexPod components - Describe how to configure neworks in a UCS solution - Describe how to configure SAN boot in a FlexPod solution - Describe knowledge of how to configure a service profile - Demonstrate knowledge of how to configure storage in a FlexPod solution - Demonstrate knowledge of how to configure Cisco Nexus switches |
| Information Gathering for FlexPod Solutions | - Describe the main FlexPod components |
| FlexPod Administration | - Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices - Describe FlexPod management applications - Demonstrate knowledge of how to install and upgrade the FlexPod solution |
NEW QUESTION 68
You are installing a FlexPod Express solution with a NetApp AFF A250 at a customer's remote site.
In this scenario, which two devices are required to provide an NFS v3 datastore? (Choose two.)
- A. Cisco Nexus 3000 Switches
- B. Cisco UCS 6324 Fabric Interconnects
- C. NetApp BES-53248 Switches
- D. Cisco UCS 6454 Fabric Interconnects
Answer: A,B
NEW QUESTION 69
A disaster occurred and both Cisco UCS Fabric Interconnects must be replaced. You must restore the system from a "full state" backup.
Which two steps will accomplish this task? (Choose two.)
- A. Remove the current firmware from the new Fabric Interconnects.
- B. Upgrade the new Fabric Interconnects to the same version of firmware as the previous Fabric Interconnects.
- C. Restore the "full state" backup using the UCS Manager "import configuration" wizard.
- D. Restore the "full state" backup through the primary Fabric Interconnect's initial system setup wizard.
Answer: B,C
NEW QUESTION 70
For a 'boot from SAN' configuration, which two features must be enabled? (Choose two)
- A. FCSP
- B. VPC
- C. FC
- D. NPIV
- E. FCOE
- F. UDLD
Answer: D,E
NEW QUESTION 71
An administrator has a FlexPod solution using VMware vSphere 6.0. The ESXi hosts use iSCSI for storage connectivity, and all paths have been configured and connected between the NetApp cluster and the ESXi hosts.
Virtual Storage Console has been installed and ESXi host-recommended settings have been applied to all hosts. The active LUN path for one of the iSCSI datastores experiences a connectivity failure and the LUN switches to a new active path.
In this scenario, which event would trigger the ESXi host to switch the active LUN path again?
- A. The original LUN path comes back online.
- B. The host processes 1,000 I/O operations.
- C. The ESXi host scans for new VMFS datastores.
- D. The NetApp LIF is reverted to its home port.
Answer: D
NEW QUESTION 72
Which service may be used to manage users and groups in a vSphere environment?
- A. Network Time Protocol (NTP)
- B. VMware vSphere Storage APIs for Array Integration (VAAI)
- C. Microsoft Active Directory (AD)
- D. Domain Name System (DNS)
Answer: C
NEW QUESTION 73
Exhibit:
You have a FlexPod solution with vSphere ESXi. When you click the icons shown in the exhibit, you do not see any network connectivity details.
Which Cisco UCS policy type should you create to enable visibility of these details?
- A. Network Control Policy
- B. Link Protocol Policy
- C. Link Profile Policy
- D. LAN Connectivity Policy
Answer: D
NEW QUESTION 74
Which two are required for single-wire management for Cisco UCS C-Series? (Choose two)
- A. UCS Manager 2.1 or higher
- B. Redundant Nexus 2232PP FEX
- C. 10 GB LOM
- D. VIC 1240
- E. FI 6200 family only
- F. VIC 1225
Answer: A,F
NEW QUESTION 75
Refer to the exhibit.
What management tool may be used for creating virtual machines?
- A. System Center Virtual Machine Manager
- B. System Center Orchestrator
- C. MMC
- D. Hyper-V Manager
Answer: D
NEW QUESTION 76
Exhibit:
Your customer has a FlexPod VMware solution deployed with NFS datastores. As shown in the exhibit, the links between the Fabric Interconnects and storage controllers are single-mode interface groups with autorevert set to true, hosting a single access LIF. NFS I/O is currently going through fabric A to ST-A. The customer wants to use both fabrics for NFS I/O.
In this scenario, what will accomplish this task?
- A. Configure VMware hosts to use a new datastore with an NFS LIF on ST-B connected to fabric B.
- B. Add two physical links between SW-A and SW-B.
- C. Migrate the existing LIF that is used for NFS I/O on ST-A to its HA partner ST-B.
- D. Configure VMware hosts to utilize an NFS LIF on ST-B that is connected to fabric A.
Answer: A
NEW QUESTION 77
Which endpoint's firmware can be directly upgraded (without the use of a Service Profile) using UCS Manager?
- A. HBA
- B. CIMC
- C. RAID Controller
- D. BIOS
Answer: B,D
NEW QUESTION 78
To support Storage Virtual Machines, which type of unique login account must be created?
- A. admin, for the cluster
- B. vsadmin, for the cluster
- C. vsadmin, for each Storage Virtual Machine
- D. admin, for each Storage Virtual Machine
Answer: C
NEW QUESTION 79
Which sends support summary information to NetApp through HTTPS?
- A. SnapSupport
- B. AutoSupport
- C. TechSupport
- D. FlexSupport
Answer: B
NEW QUESTION 80
Which backup type stores Service Profile information as a small editable file?
- A. Full Backup
- B. System Configuration
- C. All Configurations
- D. Logical Configuration
Answer: D
NEW QUESTION 81
Which four items are required in order to create a Gold Master Boot LUN to automate the provisioning of Hyper-V hosts using the built-in LUN cloning capabilities of NetApp storage? (Choose four.)
- A. Create a new interface group on the NetApp Cluster
- B. Creation of a service profile and zoning for Gold Master Boot LUN
- C. SysPrep of the server operating system
- D. Creation of a LUN for the Gold Master Boot LUN
- E. Create additional virtual fibre channel (vfc) interfaces for the Nexus 5500
- F. Configuration of the Server OS and hotfix installation
Answer: B,C,D,F
NEW QUESTION 82
Exhibit:
Your vSphere host is booting off an SD and is displaying the error shown in the exhibit.
What should you do to correct the problem?
- A. Enable Unified Extensible Firmware Interface (UEFI).
- B. Update the current ESXi scratch location.
- C. Enable SD card mirroring.
- D. Reinstall ESXi on a larger SD card.
Answer: B
NEW QUESTION 83
Your primary VSM needs to be edited, rebooted, or migrated. You need to initiate a manual switchover to your standby VSM.
What command will allow this to occur?
- A. vsm switchover
- B. System switchover
- C. Standby activate
- D. System standby
Answer: B
NEW QUESTION 84
What aggregate containing the root volume is created during the Clustered Data ONTAP setup process?
- A. 64-bit
- B. 8-bit
- C. 16-bit
- D. 32-bit
Answer: A
NEW QUESTION 85
Which three elements are included in a UCS service profile? (Choose three.)
- A. switch configuration
- B. server definition
- C. firmware revisions
- D. volume layout
- E. identity information
Answer: B,C,E
NEW QUESTION 86
An administrator has a FlexPod solution and is using OnCommand Unified Manager and OnCommand Performance Manager to monitor the FlexPod environment. Full integration has previously been configured between the two OnCommand virtual appliances; however, new performance issues are not being seen in the OnCommand Unified Manager dashboard.
In this scenario, which two settings should the administrator verify? (Choose two.)
- A. Ensure that network connectivity exists between the two virtual appliances.
- B. Ensure that the Event Publisher user credentials are entered correctly on the OnCommand Performance Manager appliance.
- C. Ensure that the NetApp cluster is configured to forward SNMP data to OnCommand Performance Manager.
- D. Ensure that OnCommand Performance Manager is licensed for use with OnCommand Unified Manager.
Answer: B,D
NEW QUESTION 87
You have a NetApp clustered Data ONTAP storage system and vSphere 6 cluster. You discover that VMware VAAI for NFS is not showing as enabled on one of the five ESXi hosts in your vSphere cluster.
In this scenario, what must you do to enable VAAI for NFS on that ESXi host?
- A. Set the DataMover. HardwareAcceleratedInit advanced setting to 0 on the ESXi host.
- B. Enable NFSv3 on the storage system.
- C. Enable VMware vStorage for NFS on the NetApp SVM.
- D. Install the NetApp NFS Plug-in for VMware VAAI on the ESXi host.
Answer: B
NEW QUESTION 88
How do the Fabric Interconnect ports connecting to the 2232PP FEX have to be configured?
- A. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Server'
- B. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Uplink'
- C. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Auto'
- D. In UCS Manager, the FI ports connecting to the FEX must be set as type 'FEX'
- E. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Network'
Answer: A
NEW QUESTION 89
Exhibit:
Referring to the exhibit, which two diagrams show the correct way to cable a new NetApp clustered Data ONTAP cluster with two nodes? (Choose two.)
- A. III
- B. II
- C. I
- D. IV
Answer: A,B
NEW QUESTION 90
What management solution can provision all three components of a FlexPod (NetApp storage, Cisco UCS compute and Cisco Nexus network)?
- A. NetApp OnCommand Insight
- B. Cisco UCS Director
- C. NetApp FlexPod Manager
- D. Cisco FlexPod Manager
- E. Cisco UCS Central
Answer: B
NEW QUESTION 91
A Cisco UCS chasis has two power suppliers connected to one PDU and two power supplies connected to another PDU. You would like to protect against the failure of one entire PDU.
In this scenario, which power policy should you configure in UCS Manager?
- A. N+1
- B. grid
- C. N+2
- D. redundant
Answer: B
NEW QUESTION 92
......
Exams4Collection just published the Network Appliance NS0-176 exam dumps!: https://www.exams4collection.com/NS0-176-latest-braindumps.html
