100% Passing Guarantee - Brilliant NS0-176 Exam Questions PDF [Mar-2022]
NS0-176 Dumps 2022 - NewNetwork Appliance NS0-176 Exam Questions
NetApp NS0-176 Exam Certification Details:
| Duration | 60 minutes |
| Sample Questions | NetApp NS0-176 Sample Questions |
| Exam Registration | PEARSON VUE |
| Number of Questions | 60 |
NEW QUESTION 48
When creating a virtual machine in VMware vSphere 5.x, which type of virtual disk should be provisioned if you would like to fully pre-allocate storage with the highest chance of being contiguous?
- A. Full Provision
- B. Thick Provision Eager Zeroed
- C. Thin Provision
- D. Thick Provision Lazy Zeroed
Answer: B
NEW QUESTION 49
What is the correct flow control setting for the intercluster ports on a NetApp cluster?
to 50% cashback.
- A. switched cluster = full switchless cluster = none
- B. switched cluster = set to match the setting on switch port switchless cluster = none
- C. switched cluster = none switchless cluster = full
- D. switched cluster = none switchless cluster = none
Answer: B
NEW QUESTION 50
How should the speed be configured on the Nexus 5548 port connecting to the Nexus 1100-X?
- A. Speed 1G
- B. Speed 1000
- C. Speed 10
- D. Speed 1000000
- E. It should not be configured - the 5548 will auto detect the correct speed
Answer: B
NEW QUESTION 51
Which is a valid connectivity option for a FlexPod?
Note some of these may also be 'valid' options outside of a FlexPod architecture but do not specifically meet FlexPod scalability and availability requirements.
- A. UCS B-Series > UCS FI > Catalyst 3750 < FAS
- B. UCS C-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
- C. UCS C-Series direct attach FAS
- D. UCS B-Series direct attach FAS
- E. UCS B-series > UCS FI > 2232PP FEX > Nexus 5548 < FAS
- F. UCS B-Series > 2232PP FEX > UCS FI > Nexus 5548 < FAS
- G. UCS C-Series > Nexus 3048 < FAS
Answer: B,G
NEW QUESTION 52
A customer wants a newly deployed UCS C-Series server's fans to run at the minimum speed required to keep the server cool. The customer is also complaining that the server fans are making too much noise.
In this scenario, which type of fan speed should you select under the Power Control Policy of UCSM?
- A. Low Power
- B. Max Power
- C. Performance
- D. Balanced
Answer: D
NEW QUESTION 53
A Cisco UCS system is operating in FC End-Host Mode. The fabric Interconnects are uplinked into Nexus 5672UP switches using native FC. The service profiles are unable to boot from SAN using FC.
When executing the show flogi database command on the Nexus switches, only the Fabric Interconnect port WWNs are visible. No service profile WWNs are shown.
What caused this issue?
- A. The Nexus switches do not have NPV enabled.
- B. The Nexus must be configured for FCoE instead of native Fibre Channel.
- C. The zoning on the Nexus switches is incorrect.
- D. The Nexus switches do not have NPIV enabled.
Answer: D
NEW QUESTION 54
Which two features allow multiple fabric logins through a single port? (Choose two.)
- A. vPC
- B. NPIV
- C. LLDP
- D. NPV
Answer: B,D
NEW QUESTION 55
The storage administrator created an export policy for a volume on a NetApp cluster.
The export policy contains a single export rule with the parameters shown below.
- protocol nfs - rorule any
- clientmatch 10.1.16.0/255.255.255.0 - rwrule any
Two hosts attempt to access the volume using the NFS protocol shown below.
- HostA with IP address 10.1.17.37 sends an access request using the NFSv3 protocol
- HostB with IP address 10.1.16.24 sends an access request using the NFSv4 protocol
Which statement about this scenario is true?
- A. HostA's access to the volume will be blocked by the clientmatch parameter; HostB will be granted RO/RW access to the volume.
- B. HostA will be granted RO/RW access to the volume; HostB's access to the volume will be blocked by the protocol parameter.
- C. HostA's access to the volume will be blocked by the protocol parameter; HostB will be granted RO/RW access to the volume.
- D. HostA's access to the volume will be blocked by the clientmatch parameter; HostB's access to the volume will be blocked by the protocol parameter.
Answer: D
NEW QUESTION 56
Where are log files located on a NetApp node?
- A. /etc/mlog/
- B. /mroot/etc/log/mlog/
- C. /mroot/etc/crash/
- D. /log/core/
- E. /letc/log/crash
Answer: B
NEW QUESTION 57
Exhibit:
Referring to the exhibit, which two diagrams show the correct way to cable a new NetApp clustered Data ONTAP cluster with two nodes? (Choose two.)
- A. III
- B. I
- C. IV
- D. II
Answer: A,D
NEW QUESTION 58
What are two valid cluster interconnect switches? (Choose two.)
- A. Cisco Nexus 9504
- B. Cisco Nexus 5596
- C. NetApp CN610
- D. Cisco Nexus 7004
Answer: B,C
NEW QUESTION 59
You installed a new NetApp cluster running clustered Data ONTAP. There is a single Storage Virtual Machine (SVM) named esx1 on the cluster.
A volume named esx_datastore1 is created in the SVM esx1. The name of the root volume for the esx1 SVM is esx1_rootvol. The default export policy was applied to the volume esx1_rootvol.
You verified that the export policy applied to esx_datastore1 contains a single rule that allows all clients to mount the volume as read/write using any version of NFS. A Linux client attempts to NFS mount the volume and receives a Permission Denied error.
In this scenario, what caused this error?
- A. The volume esx_datastore1 has not been mounted into the namespace of the esx1 SVM.
- B. UNIX permissions for the volume esx1_rootvol are not set to read/write.
- C. The default export-policy does not have at least one rule to allow all clients read-only access.
- D. NFS has not been configured on the SVM esx1.
Answer: C
NEW QUESTION 60
How many ACTIVE SPAN sessions exist on a Fabric Interconnect?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: C
NEW QUESTION 61
A customer asks you to configure QoS on a Cisco Nexus 7000 Series switch within a FlexPod solution.
Which three steps are required to accomplish this task? (Choose three.)
- A. Associate policies and actions with each traffic class.
- B. Perform a shut/no shut on the affected interfaces.
- C. Attach policies to logical or physical interfaces and VLANs.
- D. Define traffic classes.
- E. Attach policies to logical or physical interfaces and VSANs.
Answer: A,D,E
NEW QUESTION 62
A Cisco UCS chasis has two power suppliers connected to one PDU and two power supplies connected to another PDU. You would like to protect against the failure of one entire PDU.
In this scenario, which power policy should you configure in UCS Manager?
- A. grid
- B. redundant
- C. N+1
- D. N+2
Answer: A
NEW QUESTION 63
Which two are required for single-wire management for Cisco UCS C-Series? (Choose two)
- A. FI 6200 family only
- B. UCS Manager 2.1 or higher
- C. 10 GB LOM
- D. VIC 1225
- E. Redundant Nexus 2232PP FEX
- F. VIC 1240
Answer: B,D
NEW QUESTION 64
Which three are types of Storage Virtual Machines? (Choose three.)
- A. data
- B. node
- C. intercluster
- D. flex
- E. vFiler
- F. cluster
Answer: A,B,F
NEW QUESTION 65
Which three actions are required to configure two Cisco Nexus switches as vPC peers? (Choose three.)
- A. Create a peer link between switches.
- B. Configure different vPC domain IDs for each switch.
- C. Modify the network QoS policy.
- D. Enable the vPC feature.
- E. Configure matching vPC domain IDs.
Answer: A,C,E
NEW QUESTION 66
To install your VEM, what is the extension of the VEM file name you'll be looking for to complete this install?
- A. .vsm
- B. .vib
- C. .zip
- D. .vem
Answer: B
NEW QUESTION 67
Exhibit:
Which hardware component is shown in the exhibit?
- A. FEX
- B. VIC
- C. FI
- D. IOM
Answer: B
NEW QUESTION 68
Exhibit:
Referring to the exhibit, what do the asterisks on the left indicate about the output of the ~show zoneset active~ command?
- A. Only a single path is present.
- B. The device is not currently logged in.
- C. The device is currently logged in.
- D. A redundant path is present.
Answer: C
NEW QUESTION 69
......
Free NS0-176 braindumps download: https://www.exams4collection.com/NS0-176-latest-braindumps.html
