Use the best ways of preparing for 350-501 Exam Dumps with Exams4Collection Cisco 350-501 dump PDF [2021]
Cisco 350-501 exam candidates will surely pass the Exam if they consider the 350-501 dumps learning material presented by Exams4Collection.
NEW QUESTION 74
Refer to the exhibit.
Which configuration must be implemented on router R8 so that it will establish OSPF adjacency with R5?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: A
NEW QUESTION 75
Refer to the exhibit:
Which effect of this configuration is true?
- A. It enables MPLS on the interface
- B. It enables tagging for VLAN 12 on the interface
- C. It enables AToM on interface gigabitethemet1/0
- D. it creates a pseudowire class named Cisco
Answer: C
NEW QUESTION 76
Refer to the exhibit.
Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?
- A. the hello timers on Router 1 and Router 2 to be different
- B. the area numbers on Router 1 and Router 2 to be similar
- C. the wildcard mask network statement in OSPF of Router 2
- D. Router 1 to be an ABR
Answer: B
NEW QUESTION 77
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
Explanation
Path Computation Element (PCE)
Represents a software module (which can be a component or application) that enables the router to compute paths applying a set of constraints between any pair of nodes within the router's TE topology database. PCEs are discovered through IGP.
Path Computation Client (PCC)
Represents a software module running on a router that is capable of sending and receiving path computation requests and responses to and from PCEs. The PCC is typically an LSR (Label Switching Router).
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/mpls/configuration/guide/b-mpls-cg53x-crs
NEW QUESTION 78
A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an engineer apply?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Section: Networking
NEW QUESTION 79
Refer to the exhibit.
What reestablishes the OSPF neighbor relationship between Router 1 and Router 2?
- A. authentication is added to the configuration
- B. OSPF process IDs match
- C. correct wildcard mask is used on Router 2
- D. hello intervals match
Answer: D
NEW QUESTION 80
Refer to the exhibit.
Which additional configuration must an engineer apply to the edge router to inject a default route into the MP-BGP address family for the internet_shared_service dedicated VRF?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 81
A network engineer must enable the helper router to terminate the OSPF graceful restart process if it detects any changes in the LSA. Which command enables this feature?
- A. nsf cisco enforce global
- B. nsf ietf helper strict-lsa-checking
- C. nsf Cisco helper disable
- D. nsf ietf helper disable
Answer: B
NEW QUESTION 82
Refer to the exhibit.
An engineer is implementing Auto-RP and reviewing the configuration of the PE-A. Which configuration permits Auto-RP messages to be forwarded over this interface?
- A. PE-A(config-if)#no ip pim bsr-border
- B. PE-A(config-if)#ip pim sparse-dense-mode
- C. PE-A(config-if)#ip igmp version 3
- D. PE-A(config-if)#ip pim sparse-mode
Answer: B
NEW QUESTION 83
Refer to the exhibit.
A network operator must configure CSR1 interfaces GigabilEthemet2 and GigabitEthemet3 to rewrite VLAN tags 12 and 21 for traffic between R1 and R2 respectively. Which configuration accomplishes this task?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: B
Explanation:
NEW QUESTION 84
Drag and drop the OSPF area types from the left onto the correct statements on the right
Answer:
Explanation:
NEW QUESTION 85
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 86
Refer to the exhibit. AN engineer is configuring segment routing on an ISP to simplify traffic engineering and management across network domains. What should the engineer do to complete the implementation of segment routing?
- A. Area authentication must be enable before segment routing will run.
- B. OSPF must be configured with wide area metrics to support segment routing.
- C. The segment routing will run without any further configuration.
- D. The segment-routing forwarding mpls command is required to install to install SIDs in the forwarding table.
Answer: A
NEW QUESTION 87
Refer to the exhibit:
What does this value mean when it is received in XML?
- A. It shows the ending of the script
- B. It means a data fie4d is blank
- C. It indicates a value assigned by a network administrator to tag a route
- D. It indicates a break in a sequence
Answer: A
NEW QUESTION 88
Refer to the exhibit.
Which configuration must be applied to each of the four routers on the network to reduce LDP LIB size and advertise label bindings for the /32 loopback IP space only?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: A
NEW QUESTION 89
Refer to the exhibit:
An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- A. Router 1 drops all traffic with a local-preference set to 150
- B. Router 1 and Router 2 advertise the route to 192.0.2.0/24 to all BGFD peers.
- C. All traffic is dropped
- D. All traffic to 192.168.1.0/24 is dropped
Answer: D
NEW QUESTION 90
Refer to the exhibit.
An engineer is implementing BGP selective prefix suppression. The router must advertise only 10.16.4.0/24,10.16.5.0/24. and summarized route 10.16.0.0/21. and suppress 10.16.6.0/24. Which configuration must the engineer apply to the router?
A)
B)
C)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: B
NEW QUESTION 91 
Refer to the exhibit. An engineer must configure router R2 as the new P router in the network. Which configuration must be applied to R2 to enable LDP-IGP Sync on its L2 IS-IS adjacencies?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Section: MPLS and Segment Routing
Explanation/Reference:
NEW QUESTION 92
Which two actions describe ISP delegation to PCE servers? (Choose two)
- A. adding a new PCE server with lower precedence than the primary PCE
- B. adding a new PCE server with higher precedence than the primary PCE
- C. removing TE re-optimization timer timeouts
- D. changing the precedence of any of the PCE servers
- E. entering the mpls traffic-eng reoptimize command
Answer: A,C
NEW QUESTION 93
......
Full 350-501 Practice Test and 250 unique questions with explanations waiting just for you, get it now: https://drive.google.com/open?id=1Aj29T-dSZQe4apo1g8BtId8aJ6u9A5gX
Accurate & Verified Answers As Seen in the Real Exam here: https://www.exams4collection.com/350-501-latest-braindumps.html
