Try 350-501 Exam Valid Dumps with Instant Download Free Updates
350-501 Dumps First Attempt Guaranteed Success
The Implementing and Operating Cisco Service Provider Network Core Technologies certification is an essential certification for individuals whose goal is to work in the network industry as a network administrator or service provider. Obtaining this certification signifies that a candidate has a complete understanding of the core network technologies used in the service provider domain and has the skills to manage and operate these technologies efficiently.
Cisco 350-501 is a certification exam that focuses on implementing and operating Cisco’s service provider network core technologies. 350-501 exam is for those who aspire to become a Cisco certified specialist in service provider core networking technologies. Implementing and Operating Cisco Service Provider Network Core Technologies certification is intended for professionals who work in service provider network operations and want to enhance their knowledge and skills in implementing and managing network technologies.
NEW QUESTION # 210
Which type of attack is a Protocol attack?
- A. SYN flood
- B. TFTP flood
- C. Slowlorls
- D. HTTP flood
Answer: A
Explanation:
Protocol Attacks
Includes SYN floods, fragmented packet attacks, Ping of Death, Smurf DDoS and more. This type of attack consumes actual server resources,
NEW QUESTION # 211
Refer to the exhibit:
A network engineer is implementing QoS services. Which two statements about the QoS-group keyword on Cisco IOS XR 3re true? (Choose two )
- A. QoS group can be used in fabric QoS policy as a match criteria
- B. The QoS group numbering corresponds to priority level
- C. It marks packets for end to end QoS pokey enforcement across the network
- D. QoS group marking occurs on the ingress
- E. It cannot be used with priority traffic class
Answer: A,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/ncs6000/software/ncs6k_r6-1/qos/configuration/guide/b-qos-cg-ncs6k-61x/b-qos-cg-ncs6k-61x_chapter_0110.html Fabric QoS policy class maps are restricted to matching a subset of these classification options:
precedence
dscp
qos-group
discard-class
mpls experimental topmost
NEW QUESTION # 212
What do Chef and Puppet have in common?
- A. manage agents referred to as minions
- B. use Ruby
- C. require modules to be created from scratch
- D. use a master server
Answer: D
NEW QUESTION # 213
Refer to the exhibit.
What does the number 2 mean in the configuration?
- A. It dictates the number of sessions that will be open with the SNMP manager
- B. It represents the version of SNMP running.
- C. It indicates two SNMP managers are able to read and write with the agent using community string ciscotest.
- D. It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent.
Answer: D
NEW QUESTION # 214
Refer to the exhibit.
An ISP provides shared VoIP Extranet services to a customer in VRF-100 with these settings:
The VoIP services are hosted in the 198.19.1000/24 space.
The customer has been assigned the 198.18.10/29 IP address bloc*.
VRF-100 is assigned Import and export route target 85010:100.
Which configuration must the engineer Apply to PE-1 to provision VRF-100 and provide access to the shared services?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: D
NEW QUESTION # 215
Which two IS-IS parameters must match before two Level 2 peers can form an adjacency? (Choose two )
- A. system ID
- B. MTU
- C. authentication settings
- D. area ID
- E. hello timer setting
Answer: B,C
NEW QUESTION # 216
Refer to the exhibit.
An engineer is configuring router R1 for OSPFv3 as shown. Which additional configuration must be performed so that the three active interfaces on the router will advertise routes and participate in OSPF IPv6 processes?
- A. B
- B. C
- C. A
Answer: C
NEW QUESTION # 217
Refer To the exhibit:
On R1, which output does the show isis neighbors command generate?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 218
Refer to the exhibit:
What is the URL used for with REST API?
- A. It is used to initiate an FTP session to save a running configuration of a device.
- B. It is used to send a TACACS+ authentication request to a server
- C. It is used to contact a URL filter to determine the efficacy of a web address
- D. It is used to send a message to the APIC to perform an operation on a managed object or class operator
Answer: D
NEW QUESTION # 219
An engineer working for a private telecommunication company with an employee id: 3948:11:613 needs to limit the malicious traffic on their network.
Which configuration must the engineer use to implement URPF loose mode on the GigabitEthernet0/1 interface?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
"reachable-via any" must be configured for Loose mode on both IPv4 & IPv6.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/sec-data-urpf-xe-3s-book/sec-unicast-rpf-loose-mode.html
NEW QUESTION # 220
Drag and drop the LDP features from the left onto the correct usages on the right.
Answer:
Explanation:
Explanation
1: graceful restart 2: IGP synchronization 3: session protection 4: targeted-hello accept
NEW QUESTION # 221
A network engineer Is implementing a QoS policy for outbound management traffic classification and marking on a CPE device with these requirements:
* Management protocols must be marked with DSCP AF class 2 w4h low drop probability.
* Monitoring protocols must be marked with DSCP AF class 1 with low drop probability.
* All remaining traffic must be marked with a DSCP value of 0.
Which configuration must the engineer implement to satisfy the requirements?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0/qos/configuration/guide/nexus1000v_qos/qos_6dscp_val.pdf
NEW QUESTION # 222
Refer to the exhibit:
An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- A. Router 2 must configure a route to null 0 for network 192 168.1 0/24 for the RTBH implementation to be complete.
- B. Router 2 is the router receiving the DDoS attack
- C. Router 1 must be configured with uRPF for the RTBH implementation to be effective.
- D. Router 1 is the trigger router in a RTBH implementation.
Answer: D
NEW QUESTION # 223
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
1: PIM-DM 2:IGMP 3:PIM-SM 3:shared tree 4:source tree
NEW QUESTION # 224
Which configuration modifies Local Packet Transport Services hardware policies?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 225
Refer to the exhibit.
Refer to the exhibit. A large service provider is migrating device management from Layer 2 VLAN-based to Layer 3 IP-based solution. An engineer must configure the ISIS solution with these requirements:
Network management server IP 172.16.10.1 must be advertised from the core MPLS network to the regional domain.
The external network 202.10.0.0/24 must not establish ISIS peering with the R5 router.
The regional network must prevent sending unnecessary hello packets and flooding the routing tables of the R5 router.
Which two ISIS parameters must be implemented to meet these requirements? (Choose two.)
- A. advertise-passive-only
- B. overload bit passive
- C. passive-interface Loopback0
- D. attached bit on ISIS instance
- E. LSP lifetime maximum
Answer: D,E
NEW QUESTION # 226
Which two IS-IS parameters must match before two level 2 peers will form an adjacency? (Choose two.)
- A. system ID
- B. MTU
- C. authentication settings
- D. area ID
- E. hello timer setting
Answer: B,C
NEW QUESTION # 227
Refer to the exhibit:
This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows NETCONF uses remote procedure calls.
- B. It shows that the running configuration is blank
- C. It shows that the full configuration is being modeled by VANG
- D. It shows the hostname of the device as rpc-reply
Answer: A
NEW QUESTION # 228
How do intent APIs make it easier for network engineers to deploy and manage networks?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 229
Which configuration mode do you use to apply the mpls ldp graceful-restart command in IOS XE Software?
- A. MPLS
- B. MPLS LDP neighbor
- C. global
- D. interface
Answer: C
Explanation:
Section: Architecture
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_ha/configuration/xe-3s/mp-ha-xe-3s-book/ mp-ldp-grace-rstrt.html
NEW QUESTION # 230
DRAG DROP
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right.
Select and Place:
Answer:
Explanation:
Section: Services
NEW QUESTION # 231
Refer to the exhibit:
Which command is used to complete this configuration for QoS class-based marking?
- A. PE-A(config -pmap-c)#priority
- B. PE-A(config-pmap-c)#fair-queue
- C. PE-A(config-pmap-c)#set dscp ef
- D. PE-A(config-pmap-c)#random-detect
Answer: C
NEW QUESTION # 232
While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.
After you issue this command, which BGP packets does the PE accept?
- A. from 2.2.2.2, with a TTL of less than 2
- B. from 2.2.2.2, with a TTL ol 253 Of more
- C. to 2.2.2.2, with a TTL of less than 253
- D. to 2.2.2.2, with a TTL of 2 or more
Answer: A
NEW QUESTION # 233
......
100% Guarantee Download 350-501 Exam Dumps PDF Q&A: https://www.exams4collection.com/350-501-latest-braindumps.html
Kickstart your Career with Real Updated Questions: https://drive.google.com/open?id=1xtb3PVCmxH4860dY4fq_p2LUKW4GQcV_
